Enclosure Only, 10 and 12 Inch

Gladen Subwoofer Boxes and Enclosures

Sealed and ported enclosures cut for Gladen SIGMA subwoofers, CNC-machined in Tullahoma, Tennessee.

Proline X subwoofer enclosures built for Gladen SIGMA subwoofers.

Enclosure Only, 10 and 12 Inch

The enclosures here are cut for Gladen's SIGMA SSWX10 and SSWX12 subwoofers, in wedge and down-fire shapes, sealed and ported, single and dual.

Every cabinet is machined in Tullahoma, Tennessee to the parameters Gladen publishes for the driver it names. We build the box; you source the driver.

Gladen enclosures in 10 and 12 inch, sealed and ported, wedge and down-fire.

Cut, assembled and finished in Tullahoma, Tennessee, to the parameters Gladen publishes for each driver.

Driver parameters are taken from Gladen published data. We build enclosures to those figures; we do not stock Gladen drivers and make no claim to represent the brand.

Shop the Lineup

←
→

All products loaded

Every Gladen Cabinet We Cut

Net volume and tuning as stated on each listing. All are Performance Optimized.

Gladen cabinets currently listed. Net volume in cubic feet; a dual states the total.
CabinetDriverNet volumeTuning
Wedge sealed 10SSWX100.46Sealed
Wedge sealed dual 10SSWX101.12 totalSealed
Down-fire sealed dual 10SSWX100.97 totalSealed
Wedge sealed 12SSWX121.00Sealed
Wedge sealed dual 12SSWX122.01 totalSealed
Down-fire sealed 12SSWX121.15Sealed
Down-fire sealed dual 12SSWX122.01 totalSealed
Wedge ported 12SSWX121.6036 Hz
Down-fire ported 12SSWX121.5735 Hz

Built to Gladen's Published Figures

The SSWX12

Gladen's twelve gets the widest choice here: a sealed wedge and a sealed down-fire in single and dual, plus ported cabinets tuned at 35 and 36 Hz. It is a stiff, small-compliance motor, 32 Hz free-air resonance on only 28.4 litres of Vas, which is what lets a sealed box for it come in at a cubic foot.

The SSWX10

The ten is cut as a sealed wedge in single and dual, and as a sealed dual down-fire. Its frame is large for a ten, so the cabinet width is set by the baffle rather than by the airspace, and each listing prints the alignment that produces.

One construction standard

Every cabinet on this page is Performance Optimized: a 1.5 inch double baffle, cut to one driver rather than to a size class, with a 1-year limited warranty.

How to Choose

Start from the driver

Each cabinet is cut to one Gladen model's published parameters, and the listing names it. The SSWX10 and the SSWX12 want different cabinets, and the base SIGMA SSW drivers are not the same frame as the SSWX they sit beside.

Then the alignment

Sealed is the smaller, more forgiving box and ships with polyfill installed. Ported gives more output around its tuning from a larger cabinet and ships without fill. The sealed and ported pages set the two side by side.

Then the shape

Wedge if the box goes against a seat back, down-fire if it sits on a floor.

Then source the driver

We do not stock Gladen subwoofers. These cabinets are cut for a driver you already own or buy elsewhere. Other brands are on the subwoofer box hub.

Wedge or Down-Fire

Wedge: against a seat back

The rear panel is tapered 20 degrees to sit flush against a raked seat back or a truck cab wall. That recovers airspace a square box would waste in the same spot. See every brand's wedge cabinets.

Down-fire: on a flat floor

The cone faces the floor on a fixed 30 by 15 inch footprint, with the gap set by 1.75 inch standoffs that ship with the cabinet rather than left to chance. It suits an SUV or hatch cargo floor where height is short. See every brand's down-fire cabinets.

Cut for One Driver, Not a Size Class

A twelve inch Gladen cabinet here is not a general twelve inch box. Each is cut to the published alignment of the driver it names, so the net volume and the baffle cutout are right for that model rather than approximated for a family of them.

Threaded Insert Kit, Not Pre-Pressed

Gladen publish no bolt circle for the SIGMA drivers, so the inserts cannot be pressed at the shop. Every cabinet on this page ships with a threaded insert kit and stainless machine screws: set the driver in its recess, mark the holes, drill and press. We also do not stock Gladen subwoofers, and any warranty on the driver itself runs through Gladen.

The Gladen Range at a Glance

SSWX10 (10 inch): a sealed wedge in single and dual, and a sealed down-fire in dual.

SSWX12 (12 inch): a sealed wedge and a sealed down-fire, each in single and dual, plus a ported wedge tuned to 36 Hz and a ported down-fire tuned to 35 Hz.

The SSWX08 has no cabinet on this page. Its frame is wide for an eight and its Vas is small, so the smallest wedge the chassis will make for it is already larger than the alignment wants.

Driver-matched

Performance Optimized Series

The whole range

The build standard across every Gladen cabinet here: a 1.5 inch double baffle, cut to one SIGMA driver's published parameters rather than to a size class.

1-year limited warranty

Two shapes

Wedge and down-fire

10 and 12 inch

Wedges rake the rear panel 20 degrees for a seat back. Down-fires aim the cone at the floor on a fixed 30 by 15 inch platform, standoffs supplied. Sealed across the range, ported on the twelve.

Sealed and ported

Enclosure only

You source the driver

Box only

We stock no Gladen subwoofers. The cabinet is cut to Gladen's published figures for a driver you buy elsewhere, and it ships with a threaded insert kit because Gladen publish no bolt circle.

Insert kit included

Each product page states how that cabinet is built and which Gladen model it was cut for.

Gladen Subwoofer Box Questions

Which Gladen subwoofers do these boxes fit?

The SIGMA SSWX10 and SSWX12, each cabinet cut to one of them and the listing naming which. The base SIGMA SSW drivers do not share a frame with the SSWX at the same size, so an SSWX box is not an SSW box.

Do you sell Gladen subwoofers?

No. We build the enclosure only. These cabinets are cut to Gladen's published figures for a driver you already own or buy elsewhere, and the driver warranty runs through Gladen.

Are the threaded inserts already installed?

No, and this is the one place a Gladen cabinet differs from most on the site. Gladen publish no bolt circle for the SIGMA line, so a threaded insert kit and stainless machine screws ship in the box. Set the driver in its recess, mark its holes, drill and press.

Should I choose sealed or ported?

Sealed is smaller, ships with polyfill installed and is the safer default. Ported runs a larger cabinet tuned at 35 or 36 Hz and ships dry, and on the SSWX12 it reaches an anechoic half-power point near 30 Hz against the sealed box's 45. Ported is offered on the twelve only.

Wedge or down-fire?

Wedge if the cabinet leans against a rear seat back, down-fire if it sits flat on a cargo floor. The down-fires use a fixed 30 by 15 inch footprint and vary in height, so they fit where a wedge will not.

Why is there no eight inch cabinet?

The SSWX08 has a wide frame and only 4 litres of Vas, so the smallest wedge this chassis can build for it is already larger than its alignment wants. We would rather list nothing than list a box that does not suit the driver.

Drivers Built to Match

12 Inch Subwoofers We Do Stock

The drivers below are matched to the enclosures above by Thiele-Small parameters. Buying together guarantees the alignment, port tuning, and damping work the way the engineering intended.

Last updated November 21, 2026