Proline X Dual Gladen Sigma SSWX10 sealed down fire enclosure, front view. 30 by 15 inches, 7.48 inches tall before standoffs.
Proline X Dual Gladen Sigma SSWX10 sealed down fire enclosure, side view with the recessed terminal cup. 30 by 15 inches, 7.48 inches tall before standoffs.
Proline X Dual Gladen Sigma SSWX10 sealed down fire enclosure, front view. 30 by 15 inches, 7.48 inches tall before standoffs.
Proline X Dual Gladen Sigma SSWX10 sealed down fire enclosure, side view with the recessed terminal cup. 30 by 15 inches, 7.48 inches tall before standoffs.

Proline X

Gladen Sigma SSWX10 Dual Box: Sealed 10" Down Fire Enclosure

SKU: PO 10D-S DF SSWX

QUICK SPECS
  • Alignment: 0.49 cu ft net per chamber, 0.97 total (1.12 gross). Qtc 0.684, fc 43.3 Hz, F3 44.8 Hz anechoic
  • Driver: Gladen Sigma SSWX10, 2 x 2 ohm, 700 W RMS, 15 mm Xmax linear, 5.98 in mounting depth
  • Chassis: Down firing sealed, fixed 30 x 15 in platform, 7.48 in tall excluding standoffs
  • Construction: Dual Chamber | Down-Firing Sealed | V-Groove/Dado | Double 1.5" Baffle | Threaded Insert Kit | Standoffs Included
Shipping Icon
Shipping Included No freight charges at checkout. What you see is what you pay.
USA Flag Rounded
Built in Tennessee CNC cut from 3/4" Langboard Elite MDF. V-groove and dado joinery.
Tools icon: hands-on mobile audio expertise since 1985
Advanced Terminal Cup Built in-house. ABS/Carbon Fiber. Stainless steel hardware. Copper ring terminals.
$ 309.99
In Stock and Ready to Ship
Shop Pay Financing available. Choose Shop Pay Installments at checkout.
Proline X Dual Gladen Sigma SSWX10 sealed down fire enclosure, front view. 30 by 15 inches, 7.48 inches tall before standoffs.

Gladen Sigma SSWX10 Dual Box: Sealed 10" Down Fire Enclosure

Regular price $ 309.99
Sale price $ 309.99 Regular price
Unit price
Enclosure Type Sealed
External Dimensions 30.00" W x 15.00" D x 7.48" H (measured in down fire position, excludes standoffs)
Gross Volume 1.12 cu ft
Net Volume 0.97 cu ft
Shipping Weight 39 lbs
Front Panel Thickness 1.5"
INSTALLER'S TAKE

0.49 cubic feet per chamber: Qtc 0.684 on the SSWX10, fc 43.3 Hz, F3 44.8 Hz, 7.48 inches tall before standoffs.

The motor set this one. 5.98 inches of mounting depth needs 7.48 inches of cabinet on the fixed footprint, and the airspace that height gives is what you get; the Qtc follows from it rather than the other way round.

Floor slot runs 88 percent of one cone's area at the fixed 1.75 inch standoff. That is normal for a 10 on this platform, but it is the narrowest point in the path and worth saying out loud.

One caveat on the data: Gladen's published Mms and Cms for this driver do not reconcile with their own Fs, so nothing here uses them. Fs, Qts and Vas are what the box is built on. Displacement is estimated.

No bolt circle published, so the insert kit goes in when the drivers are mounted. Sealed, so leave the polyfill alone and keep it at 700 watts or under per driver.

Product Details
Specifications
Performance Graphs
Customer Installs
Materials
Product Details

Proline X Performance Optimized Down Fire Dual 10" Sealed

Cut direct fit for the Gladen Sigma SSWX10. 0.49 cu ft net per chamber, 0.97 total on the fixed 30 by 15 inch platform, 7.48 inches tall before standoffs.

V-Groove and DadoLangboard Elite MDF0.49 cu ft Net per ChamberStandoffs Included
0.49cu ft net per chamber
0.684system Qtc
44.8 HzF3 rolloff, anechoic
7.48 incabinet height, excludes standoffs

Built Around the Gladen Sigma SSWX10

The SSWX10 sits in Gladen's SSWX line, the strong half of the SIGMA series: a glassfiber cone on a foam surround, an aluminium basket and aluminium coil former, a 65 mm dual 2 ohm voice coil, 15 mm of linear excursion and 700 watts RMS, on a 281 mm frame needing 152 mm (5.98 in) of mounting depth. Every Thiele-Small figure here is Gladen's own, measured with the coils in series, and it comes from two surfaces that agree: their SIGMA manual and their product page. Qes and Qms reproduce the printed Qts to within 1.3 percent, but Gladen's published moving mass and compliance do not reconcile with their own Fs on this driver, about 30 percent out whichever pair you solve from. Fs, Qts and Vas are the only parameters a sealed alignment uses and those are corroborated by Gladen's own recommended volumes, so nothing on this page is derived from the moving mass or the compliance.

Gladen publish no bolt circle for the SIGMA drivers, so a threaded insert kit and stainless machine screws ship in the box rather than the inserts being pressed at the shop. They publish no basket displacement either, so 0.06 cu ft per driver is an estimate and the net volume carries it.

Two Fully Separate Chambers

A full-height divider seated in dados splits the cabinet into two sealed chambers of 0.49 cu ft each, so one driver's back pressure cannot modulate the other's cone. Each driver sees only its own air, and both chambers are cut to the same volume so the pair stays matched. One shared side-mounted terminal cup feeds both driver positions.

Net Volume, Not Gross

The 0.49 cu ft quoted above is net acoustic volume per chamber, measured after subtracting the brace, the divider where there is one, and the driver's own displacement. It is the figure you would type into a modelling program, not the raw box volume. Gross on this cabinet is 1.12 cu ft.

What the Alignment Actually Is

The 5.98 inch motor sets the minimum cabinet height on this platform, not the airspace, so the 0.49 cu ft and the Qtc 0.684 that follows are what that height gives rather than a target chosen first. A down fire cabinet for this driver cannot be made shallower without fouling the motor on the top panel.

Driver Chamber System Qtc fc F3
SSWX10 (2 x 2 ohm) 0.49 cu ft Qtc 0.684 43.3 Hz 44.8 Hz

For reference, Gladen publish their own recommended sealed volumes for this driver, net of the driver's own volume:

Gladen Box Volume System Qtc fc F3
Compact 10 L / 0.35 cu ft Qtc 0.745 47.1 Hz 44.9 Hz
Universal 16 L / 0.57 cu ft Qtc 0.661 41.8 Hz 44.9 Hz
SQ 23 L / 0.81 cu ft Qtc 0.614 38.8 Hz 45.6 Hz
F3 is anechoic and excludes cabin gain. In a car the cabin's transfer function adds real output below 50 Hz, so in-vehicle response runs deeper than the figure above.

Down Fire Construction

The pair of drivers fires downward through the bottom baffle into the floor, and the cabinet stands on standoffs that set the gap the output passes through.

Double Baffle, Flush Recess

Two bonded 3/4 in MDF sheets at the driver face, 1.5 inches through, the outer layer machined as a flush recess to Gladen's 281 mm frame.

Side-Mounted Terminal Cup

One cup, side mounted and pre-wired with 12 gauge OFC to both driver positions. Square corners, no radii.

Standoffs Included

The 1.75 inch standoffs ship with the cabinet and set the floor gap. The 7.48 inch height above excludes them.

At the fixed 1.75 inch standoff the floor slot around each cone measures 88 percent of that cone's area. That is normal for a 10 inch on this platform and it is why the standoff height is not adjustable downward, but it is worth knowing that the slot, not the cone, is the narrowest point in the path.

Motor Clearance and Orientation

The motor rises off the bottom baffle into the cavity, so clearance runs to the top panel rather than to a back wall. Here the 152 mm (5.98 in) motor leaves 0.75 inches above it. All three external dimensions are stated in the down fire position, 30 inches wide by 15 deep by 7.48 tall, and the height excludes the standoffs.

Power and Warranty

A matched pair of SSWX10 gives four 2 ohm coils, 1.8 ohm DC each. On one channel the sensible load is 2 ohms: each driver's own coils in series for 4 ohms, then the two drivers in parallel. All four in series gives 8 ohms. Do not wire all four in parallel, which is 0.5 ohms and almost nothing is stable there. Power handling is 700 watts RMS per driver, 1400 for the pair, so aim for roughly 979 to 1400 watts total.

Cut and assembled in Tullahoma, Tennessee on our own CNC equipment. Finished in plush black carpet, polyfill wall lining installed in both chambers, standoffs and a threaded insert kit in the box. 1 year limited warranty. Enclosure only, the drivers are purchased separately. Call or text 931-563-5151.

Cut for the Driver, Not the Catalog

0.49 cu ft net per chamber, 0.97 total at Qtc 0.684, F3 44.8 Hz, on the 30 by 15 inch down fire platform. Built to order in Tennessee.

Specifications
SpecificationValue
SeriesProline X Performance Optimized Down Fire
Compatible DriverGladen Sigma SSWX10 (2 x 2 ohm), quantity 2. Direct fit
ConfigurationDual 10 inch, two fully separate chambers sealed down fire
Mounting PositionTrunk or cargo floor, cone facing the floor
Firing DirectionDownward through the bottom baffle. Standoffs included
External Width30.00 in
External Depth15.00 in
External Height7.48 in, excluding the 1.75 in standoffs
Internal Volume, Gross1.12 cu ft total
Internal Volume, Net Acoustic0.49 cu ft per chamber, 0.97 cu ft total, after the divider and the driver displacement
Driver Mounting Depth5.98 in required (152 mm); 0.75 in clearance above the motor to the top panel
Alignment, SSWX10 (2 x 2 ohm)Qtc 0.684, fc 43.3 Hz, F3 44.8 Hz anechoic, per chamber
Airspace Set ByMotor clearance. The 5.98 in motor sets the minimum height on this fixed footprint
Floor Slot88 percent of one cone's area at the fixed 1.75 in standoff
Woofer OpeningsTwo, 9.13 in, cut for Gladen's 232 mm installation diameter
Frame Outer Diameter11.06 in (281 mm)
Bolt CircleNot published by Gladen; threaded insert kit included
Driver Displacement0.06 cu ft each, estimated; Gladen publish none
Maker Recommended Sealed10 L Compact, 16 L Universal, 23 L SQ net per driver, Qtc 0.74 / 0.66 / 0.61
Power Handling700 W RMS per driver, 1400 W for the pair
Recommended WiringCoils in series per driver, drivers in parallel, for a 2 ohm single channel load
Terminal CupOne, side mounted, pre-wired with 12 gauge OFC
BaffleDouble layer, 1.5 in through, outer layer machined as a flush recess
MaterialLangboard Elite MDF, 3/4 in
CoveringPlush black carpet
DampingPolyfill wall lining installed in both chambers
Feet1.75 in standoffs included
Weight33 lb cabinet, 39 lb packed
Warranty1 year limited
Build LocationTullahoma, Tennessee
Performance Graphs
Net airspace
0.49
cu ft per chamber
System Qtc
0.68
sealed
Half power
44.8
Hz · F3
Xmax at
683
W RMS · no filter
With 25 Hz subsonic
993
W RMS · +45%
Amplifier
489-700
W RMS recommended
This enclosure holds 0.49 cu ft net per chamber. In it the Gladen SSWX10 runs a system Qtc of 0.68 with half power at 44.8 Hz, and the cone reaches its 15.0 mm travel limit at 683 W, below the driver’s 700 W thermal rating, so travel is what stops you here, not heat. Run a subsonic filter at 25 Hz and that becomes 993 W — +310 W, or 45 percent more power for the same 15.0 mm of travel.

01Is it a sealed driver?

Efficiency bandwidth product places the motor before anything else is decided.

EBP = Fs ÷ Qes = 59.6
SEALED 0–50 TRANSITION 50–100 PORTED 100–150 0 50 100 150 2 x 2 ohm 59.6
2 x 2 ohm · EBP 59.6
At 59.6 the SSWX10 sits in the transition band, not the sealed band. That is not a mismatch: a transition motor works in either alignment, and sealed buys a smaller box and a gentler roll-off at the cost of some low-end output. Stage 02 shows what this airspace actually does with it.

02What the box does to it

0.49 cu ft against a 13.1 L Vas.

α = Vas ÷ Vb = 0.95  ·  Fc = Fs√(α+1) = 43 Hz  ·  Qtc = 0.68
20 30 50 70 100 150 200 +6 +0 -6 -12 -18 -24 FREQUENCY · Hz LEVEL · dB −3 dB
2 x 2 ohm · Qtc 0.68, Fc 43 Hz, F3 44.8 Hz
The box lifts resonance from 31.0 Hz free-air to 43 Hz and half power lands at 44.8 Hz, anechoic, before any cabin gain. Parameters are Gladen's own published figures for the SSWX10, taken from the SIGMA subwoofer manual (document GLADEN-SIGMA-SUB-BA-001, Revision A) and cross-checked against Gladen's product page; the two agree on every figure. Gladen measure the set with the voice coils in series. Fs, Qts and Vas are the only parameters a sealed alignment uses, and Qes and Qms reproduce the printed Qts to within 1.3 percent. Gladen's published moving mass and compliance do NOT reconcile with the printed Fs on this driver, about 30 percent out whichever pair you solve from; they are reproduced for completeness but nothing here derives from them. Gladen publish their recommended sealed volumes net of the driver's own volume: 10 litres Compact, 16 litres Universal, 23 litres SQ, which land on Qtc 0.74, Qtc 0.66, Qtc 0.61. This is a down fire cabinet on the fixed 30 by 15 inch platform with height as the only free variable, so the figure plotted here is 0.49 cu ft per chamber. The 5.98 inch motor sets the minimum cabinet height here, not the airspace, so the Qtc is what that height gives rather than a target that was chosen. Gladen publish no basket displacement, so 0.06 cu ft per driver is estimated and the net volume carries that estimate. The driver is built in one coil configuration only, 2 x 2 ohms.

03The watts that reach Xmax (in this enclosure)

Travel scales with the square root of power, so there is one wattage that puts the cone exactly on 15.0 mm — and a bigger one once a subsonic filter stops it wasting travel below the passband.

PXmax = 683 W unfiltered  →  993 W with a 25 Hz subsonic
20 30 50 70 100 150 200 0 4 8 12 16 FREQUENCY · Hz CONE TRAVEL · mm PAST LINEAR TRAVEL · Xmax 15.0 mm 683 W reaches Xmax here
2 x 2 ohm · 683 W, no filter2 x 2 ohm · 993 W with subsonic at 25 Hz, 24 dB/octXmax 15.0 mm one-way
Every trace touches the limit and no further, because each is drawn at the exact power that puts that coil on 15.0 mm. Unfiltered that is 683 W, reached first at 20 Hz. It sits under the 700 W the driver can take thermally, so the enclosure sets the ceiling, not the voice coil. The dashed traces are the same driver behind a subsonic filter at 25 Hz, 24 dB/oct: stopping the cone wasting travel below the passband lets it take 993 W before hitting the same 15.0 mm. That is 45 percent more amplifier for the price of one filter setting.
ParamValueUnitNote
Fs31.00Hzfree-air resonance
Qts0.4902 x 2 ohm
Vas13.10Lequivalent compliance
Sd366.5cm²effective piston area
Xmax15mmlinear, published as plus/minus 15 mm
Pe700Wcontinuous RMS
SPL80.6dB1 W / 1 m, derived from T/S

Driver parameters as published by Gladen SIGMA subwoofer manual, SSWX10 column. Curves computed against this enclosure’s actual net airspace.

Customer Installs
Materials
Material

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Performance Series enclosure is CNC-cut from Langboard Elite MDF, 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure, because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications

Langboard Elite MDF: Published Mill Data

Property Value Why It Matters
Panel Stock Langboard Elite MDF Named, verifiable panel source, not generic "high-density MDF"
Thickness 3/4" (18mm) Industry standard for subwoofer enclosures; panels below this flex under pressure
Density 48.5 lbs/ft³ Higher density = less porosity, better screw retention, reduced resonance
Internal Bond 200 psi Measures resistance to delamination under sustained internal pressure. The most enclosure-relevant spec on this sheet
Modulus of Rupture (MOR) 4,200 psi Bending strength before the panel breaks, relevant for larger unsupported baffle spans
Modulus of Elasticity (MOE) 410,000 psi Stiffness under load; higher MOE means less panel flex under bass pressure, less resonance
Face Screw Holding 325 lbs How firmly the panel surface holds a screw; critical for baffle joint integrity over time
Edge Screw Holding 250 lbs Panel edge retention, relevant for every joint that isn't face-to-face
Internal Bond

200 psi: The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually. The symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE: Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness, its resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level, not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge: Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint, where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Performance Series enclosure is not going anywhere.

Sourcing

Named Panel Stock: Not "Premium MDF"

The phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification. It is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements, and in how the box holds up two years into daily use.

CNC-Cut to Spec

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.

Handcrafted in USA

Handcrafted in USA

Hand-assembled at our facility in Tullahoma, TN. Every enclosure is inspected before it ships.

Tuned to the Build

Tuned to the Build

Internal volume and port geometry are calculated to spec and CNC-cut to exact dimensions. The box performs the same way every time.

Frequently Asked Questions

Does this fit two SSWX10, and will any other 10 inch fit?

Why 0.49 cubic feet per chamber, and what alignment does it target?

What amplifier power should I run, and how should I wire it?

Why down firing, and what do the standoffs do?

Why is the baffle double-layered?

What is the expected low-frequency extension?

Do I need to add polyfill or damping?

Are the drivers included, and are the threaded inserts installed?

Related Articles