Accessories

Car Audio Accessories and Install Parts

This page holds the parts that finish an install: power and signal wiring, line drivers, crossovers, grilles, enclosure carpet and subwoofer mounting hardware. They decide whether the rest of the system performs the way it should.

Power and signal wiring

The Divini amp wiring kits are 100% oxygen-free copper and sized by amplifier. The 8 gauge kit uses an 80A ANL fuse, the 4 gauge kit a 150A ANL fuse and the 1/0 gauge kit a 250A ANL fuse. The 4 and 8 gauge kits also include RCA and speaker wire. For two amplifiers, the DCAK0-2AMP feeds both from one 1/0 gauge run through a 300A main fuse and a distribution block with two 150A fuses. Divini twisted pair RCA cables come in 2 channel and 4 channel versions, plus a Y-adapter.

Signal processing and level control

Tru Technology line amp conditioners sit between a DSP or head unit and your amplifiers and raise the signal up to 10V RMS. The LINE-2CA is 2 channel pure Class A and the LINE-8 V2 is 8 channel Class AB. The Wavtech bassRESTOR restores bass to recordings that are thin on low end, and the Wavtech linkRC is a remote level control for the LinkDQ.

Crossovers and harnesses

The Karma Mobile Audio Allure Crossover is a matched passive 2-way pair that hands off between the Allure 6 midbass and Allure 1 tweeter at 2,500 Hz. The Eton MRX 3W set replaces the series crossovers in Eton MAS, RSE, RSR, CSR, PRO and POW systems. The Eton ACCM2 and ACCM4 cable sets connect Micro 120.2 and Micro 250.4 amplifiers to an ISO harness.

Enclosure building supplies

We sell the carpet we wrap Proline X enclosures in by the linear yard: black needlepunch stretch carpet 80 inches wide and charcoal trunk liner carpet 54 inches wide. The Threaded Insert Kit gives a subwoofer a machine thread to bolt into instead of wood screws in MDF. Grilles are grouped on our subwoofer grills page, and if you still need a box, see our universal subwoofer enclosures, built in Tullahoma, Tennessee.

Frequently Asked Questions

Which Divini amp kit gauge do I need?

Divini's rule of thumb is 8 gauge up to about 500 watts RMS, 4 gauge up to about 1,000 watts RMS, and 1/0 gauge above that. Your amplifier's manual has the final word.

Does the 1/0 gauge kit include RCA and speaker wire?

No. The DCAK0-ANL includes power, ground and remote wire with a 250A ANL fuse. Pair it with Divini RCA cables and your own speaker wire.

Which threaded insert kit fits my subwoofer?

Start with the basket. Stamped steel baskets take the 8-32 kit. Cast baskets take the 10-24 kit, and you choose Double Baffle unless the panel the driver bolts to is a single 3/4 inch layer.

How is enclosure carpet sold?

By the linear yard, shipped as one continuous piece. One yard covers most single 10 or 12 inch boxes, and dual 12 inch and larger boxes usually need two.

What does a line amp conditioner do?

It buffers and boosts the signal between your source and your amplifiers. A stronger signal lets you run amplifier gains lower, which lowers the noise floor.

Featured Products

Browse our latest picks.

Wavtech linkRC
WavtechlinkRC

Wavtech linkRC

$ 24.99
In stock and ready to ship!
←
→

All products loaded