Four Drivers, One Cabinet

Quad 10 Inch Subwoofer Boxes

Quad 10 inch subwoofer boxes, CNC-cut in Tullahoma, Tennessee.

Quad 10 inch subwoofer box built by Proline X in Tullahoma, Tennessee

Four Drivers, One Cabinet

Four tens is the highest driver count we cut in a size that still fits a vehicle. It is a little less cone area than three twelves, spread over four smaller cones with less moving mass each.

Every cabinet on this page is sealed and holds four 10 inch drivers, each in its own chamber behind a bonded full-height divider. The driver-matched cabinets are cut from the parameters the driver's maker publishes. Each listing states the net volume for the whole cabinet and the figure per chamber, which is what one driver actually works into.

Sealed quad 10 inch cabinets, wedge, 44 inches wide.

Cut, assembled and finished in Tullahoma, Tennessee. Shipping included.

Driver-matched cabinets are cut from the parameters each driver's maker publishes. Enclosure only unless the listing says loaded.

Shop the Lineup

←
→

Every Quad 10 Inch Build, Side by Side

The series decides the build standard and the warranty term. Prices are the lowest in stock in each series today.

Quad 10 inch cabinets by series, 12 November 2026.
SeriesChambersShapesFitWarrantyFrom
Performance OptimizedA sealed chamber per driverWedgeDriver-matched1 year limited$489.99

Every cabinet is Langboard Elite MDF, carpeted, with an ABS or carbon fibre terminal cup.

The Quad 10 Inch Range at a Glance

Performance Optimized (a sealed chamber per driver): wedge, cut for American Bass, Arc Audio, AudioControl, Audiofrog, DD Audio, Dayton Audio and more. From $489.99.

Pricing across the page runs from $489.99 to $639.99, shipping included. The cabinets sit on one platform 44 inches wide, and every listing prints its full external dimensions. Browse the full lineup above.

Driver-matched

Performance Optimized quads

Quad 10 inch·From $489.99

Sealed, a chamber per driver. Wedge, cut to a named driver.

1 year limited warranty on Performance Optimized

Construction and chamber layout are stated on each product page.

Quad 10 Inch Subwoofer Box Questions

How many chambers does a quad cabinet have?

Two. A bonded full-height centre divider splits the cabinet in half and each chamber carries two drivers, both lined with polyfill. The two drivers in a chamber share its volume; the two chambers do not share with each other. The listing states the total net volume and the figure per chamber.

Is the net volume per driver or for the whole box?

The headline figure is for the whole cabinet. Each listing also gives the per-chamber volume, which is what each pair of drivers is working into and the number the alignment was solved from.

How wide is a quad 10 inch box?

Every cabinet here is 44 inches wide. Four 10 inch cutouts plus the baffle material and dividers between them do not fit across less, so there is no narrower version. Measure the narrowest point of your opening at seat-back height before anything else.

What impedance will four subwoofers give me?

Each chamber has its own terminal cup, so you choose the coil wiring on each driver and then how the two cups are joined. With the cups in parallel, four dual 4 ohm drivers reach 2 ohms with the coils in series or 0.5 ohms with them in parallel; dual 2 ohm drivers reach 1 ohm or 0.25 ohms. Putting each chamber's pair in series, or the two cups in series, lands on 8 and 2 ohms instead, or 4 and 1. Match the final load to the amplifier's minimum stable impedance rather than chasing the lowest figure. Calculate impedance for multiple subwoofers works through any set.

Can I run different subwoofers in one cabinet?

No. Run four of the same model at the same impedance. Each chamber is cut for a matched pair, so an odd driver changes both the volume its chamber is working into and the load on that chamber's cup.

Are there ported quad 10 inch boxes?

Not from us. At four drivers the extra volume a port needs no longer fits in the space that made the high driver count worth doing. Vented builds are single and dual cabinets, on the ported page.

Is a quad 10 better than three twelves?

They move close to the same air. Four tens spread it over more motors with less moving mass on each, which starts and stops faster and shares the heat; Three twelves get there with fewer drivers to buy, mount and wire, and a simpler final impedance. What will physically go in the space usually settles it. The dual subwoofer setup guide covers the trade in detail.

Last updated November 12, 2026