Tuned Ports, Driver-Matched & Universal Fit

Ported Subwoofer Boxes

Ported enclosures tuned as part of the design, CNC-cut in Tullahoma, Tennessee.

Ported Enclosure - Audio Intensity

Tuned Ports, Driver-Matched & Universal Fit

A ported subwoofer box uses the air in the port as a second radiator. Around the tuning frequency the port does much of the work, which buys output a sealed box of the same size cannot reach. Below tuning the port unloads the cone and the roll-off turns steep, which is why the tuning number matters more than any other figure on the listing.

These are CNC-cut in Tullahoma, Tennessee, from 6.5 inch up to 18 inch, in single and dual, as standard front-firing cabinets, wedges and down-fire boxes. The port is cut as part of the design, not added to it.

Ported enclosures from 6.5 to 18 inch, single and dual, in standard, wedge and down-fire orientations, across Professional, Performance and Performance Optimized Series.

Cut, assembled and finished in Tullahoma, Tennessee. Port length and area are part of each cabinet's design, and on a driver-matched cabinet they are tuned for the driver it names.

Tuning and volume figures are taken from each cabinet's own design sheet, and driver parameters from the manufacturer's published data. Where a cabinet is cut for a driver we do not sell, we build to that manufacturer's figures and make no claim to represent the brand.

Shop the Lineup

←
→

Sealed or Ported: What Actually Changes

The two alignments are not better and worse, they are different trades. This is the comparison worth reading before you choose, because the airspace you have available usually settles it.

General characteristics of the two alignments for the same driver and the same power.
SealedPorted
Output around tuningLowerHigher, often markedly
Roll-offGentle, about 12 dB per octaveSteep below tuning, about 24 dB per octave
Cabinet sizeSmaller for the same driverLarger: the port and the alignment both need volume
CharacterTight and dampedLoud and extended around tuning
Forgiving of a driver mismatchMoreLess
Best whenSpace is tight, or accuracy is the pointYou have the space and you want output

Every cabinet on this page is ported and its tuning frequency is set as part of the design. If the comparison above points you the other way, our sealed enclosures run from 8 to 18 inch.

Port Area Is Not a Detail

A port that is too small for the excursion you are asking of the driver will make noise, and no amount of tuning afterwards removes it. Our ports are sized for the excursion the driver is rated to, which is why they look large next to a generic box. If you want to check the maths for your own driver, the port area calculator is linked below.

We Cut Boxes for Drivers We Do Not Sell

Several cabinets here are cut for Kicker drivers. We build the enclosure to the manufacturer's published parameters, and we do not sell those drivers or represent the brand. Source the driver wherever you like; the enclosure is ours.

Three Series, Three Shapes

Performance Optimized is the bulk of this collection by a wide margin: every ported wedge and every ported down-fire cabinet is a driver-matched Performance Optimized build. Professional Series is the reference end, where the heavier baffle and bracing work a ported alignment rewards is the point. Performance covers the universal-cutout cabinets.

Sizes run from 6.5 inch through 18 inch, in single and dual. The shape follows the vehicle: standard front-firing cabinets, wedges tapered on the rear panel to sit against a seat back, and down-fire cabinets with the slot port folded inside them that fire into the floor on feet. Every one states its tuning frequency.

Universal

Performance Series

Universal-cutout ported cabinets at the lowest entry point. Takes any driver of the right size and mounting depth, which suits a build where the driver is not settled.

Universal cutout

The bulk of the line

Performance Optimized Series

Cut to one driver's published parameters, with the port tuned for that driver rather than to a generic figure. Every ported wedge and every ported down-fire cabinet lives here.

Cut to one driver

The reference builds

Professional Series

Heavier baffle and bracing work, which a ported alignment rewards more than a sealed one does. The reference end of the range.

Cut to one driver

Port length and area are cut to a specific tuning for a specific driver. Construction method varies by series, and each product page states how that cabinet is built.

Ported Subwoofer Box Questions

Does a ported sub box make a difference?

Yes, and a large one. At the port tuning frequency a ported cabinet is roughly 3 to 6 dB louder than a sealed cabinet of the same driver and power, which is close to double the acoustic output. It also lets the driver run cooler near tuning because the port is doing part of the work. The trade is size and a steeper roll-off below tuning.

Do you make ported down-fire or ported wedge boxes?

Yes, both. The ported down-fire cabinets carry an L-wrap slot port, one folded wall with a single bend, and sit on feet that set the floor clearance. The ported wedges put the slot in the bottom rear corner so the front baffle stays vertical. Both are cut to one driver, state their tuning frequency on the listing, and ship dry, because damping material would move the tuning. The orientation filter splits them from the standard front-firing cabinets.

Do subs hit harder in a ported box?

Around the tuning frequency, yes. A ported box gives more output for the same amplifier power, so bass notes in that band hit noticeably harder. It is not louder everywhere. Above tuning the two alignments converge, and below tuning a ported box rolls off faster and offers the cone less control.

How much louder is a ported box?

About 3 to 6 dB at the tuning frequency compared with a sealed cabinet using the same driver and the same power. 3 dB is double the power delivered acoustically, so the difference is clearly audible rather than marginal. Away from tuning the gap narrows.

What tuning frequency should I choose?

For daily music in most vehicles, 30 to 35 Hz is the usual range. Lower tuning near 28 Hz favours deep sustained bass and SPL work. Higher tuning near 38 to 40 Hz favours punch and upper bass on kick drums. Every cabinet in this collection states its tuning, so you are choosing it rather than guessing at it.

Why is a ported box bigger than a sealed one?

Because the port itself takes up internal volume, and the alignment needs more net airspace to work. A ported cabinet for a given driver is typically half again to twice the size of the sealed version. If space is the binding constraint, sealed is usually the better answer.

Can I change the port to retune the box?

Not on these cabinets, and we do not recommend trying. The port is cut and braced as part of the enclosure, and the stated tuning depends on its exact length and area. If you need a different tuning, tell us the driver and the target and we will point you at the right cabinet.

Drivers Built to Match

12 Inch Subwoofers for These Ported Boxes

The drivers below are matched to the enclosures above by Thiele-Small parameters. Buying together guarantees the alignment, port tuning, and damping work the way the engineering intended.

Drivers Built to Match

15 Inch Subwoofers for These Ported Boxes

The drivers below are matched to the enclosures above by Thiele-Small parameters. Buying together guarantees the alignment, port tuning, and damping work the way the engineering intended.

Last updated September 4, 2026