Hybrid Audio Accessories

The Legatia L3G grille has application for the Legatia L3V2, Legatia L3SE, as well as the original Legatia L3 offering.

NOTE: The grille height clearance is very close to the height of the phase plug extended pole piece on certain Hybrid Audio models. For this reason, the end-user MUST use the supplied non-hardening gasket material between the plastic retainer and the grille mesh to keep the grille mesh firmly in place, and to allow enough height clearance to the phase plug extended pole piece.

The Legatia L4G grille has application for the Legatia L4, Legatia L4SE, as well as the Legatia L4SE Carbon.

NOTE: The grille height clearance is very close to the height of the phase plug extended pole piece on certain Hybrid Audio models. For this reason, the end-user

MUST use the supplied non-hardening gasket material between the plastic retainer and the grille mesh to keep the grille mesh firmly in place, and to allow enough height clearance to the phase plug extended pole piece.

Note: The Legatia L6G grille has application for the Legatia L6V2, Legatia L6SE, as well as the original Legatia L6 offering.

NOTE: The grille height clearance is very close to the height of the phase plug extended pole piece on certain Hybrid Audio models. For this reason, the end-user MUST use the supplied non-hardening gasket material between the plastic retainer and the grille mesh to keep the grille mesh firmly in place, and to allow enough height clearance to the phase plug extended pole piece.

The Legatia L8G grille has application for the Legatia L8V2, Legatia L8SE, as well as the original Legatia L8 offering.

NOTE: The grille height clearance is very close to the height of the phase plug extended pole piece on certain Hybrid Audio models. For this reason, the end-user MUST use the supplied non-hardening gasket material between the plastic retainer and the grille mesh to keep the grille mesh firmly in place, and to allow enough height clearance to the phase plug extended pole piece.

This is a thermal protection device for Hybrid Audio Technologies tweeters. It is required when running any tweeter actively without the protection of the factory crossover on the Imagine, Clarus speakers or Legatia speakers. It is designed to protect the speakers from damage caused by turn on pops, misadjusted crossover frequencies or auto calibrating processors that deliver a signal beyond the frequency range of the tweeter. If you use the Imagine or Clarus speakers with their included crossovers these are not necessary.

These are required for approval to any warranty claim where a tweeter was damaged because of the above mentioned causes.

Includes: One pair (2 pcs) of tweeter protectors

Application to all 6.5" midbass (Clarus, Unity, Imagine, Mirus)

Application to all 6x9" midbass (Unity, Imagine, Mirus)

This kit provides you with the 25 mm Unity tweeters as well as the mounting kit.

The Mounting Kit includes 3 tweeter mounting bezels - Flush, Surface, 45 Degree Angle.