Products

American Hardbag Aggressor Pro 880 Twin 8" Full-Range Woofer Mount for Harley Davidson Baggers

Add up to four 8" full range woofers to your Harley Bagger with the Aggressor Pro 880 kit. This kit makes mounting two 8" speakers in each saddlebag quick, easy, and clean. Precision machined entirely from high-density plastic with steel threaded mounting points, this kit adds the structural integrity needed to support 2 high power speakers. Complete with powder coated pressed steel grills and all stainless steel hardware, this kit guarantees a spectacular end result. 

The Wall of Sound

Due to the exceptionally large amount of cone surface area, excursion, and efficiency that four 8" pro audio speakers have to offer, this kit delivers much more output than can be achieved with other speaker arrangements, such as two 6x9s alone. 

Exceptional Sound Quality 

Clear undistorted output. Made specifically for pro audio type speakers (not subwoofers). Because pro audio speakers are designed to play clearly at extreme volume levels for hours on end, pro audio speakers are much less stressed than a car audio type speaker in this application. Car audio type speakers do have their place but just can't compare in this kind of application. Drum strikes have a profound amount of force that you can feel just like live music. Much more dramatic than even very high-end home or car audio systems typically can deliver. 

 Totally Stealth

This kit can be used with or without lid speakers. This kit is much louder than lid speakers alone. This means that you can build a system that is totally stealth if you like. No visual queues that your bike even has a sound system, yet you have "melt your face off" loud sound. 

Works with Lid Speakers

This kit does work well with lid speakers. The woofers sit plenty low enough in the bag to clear large 6x9s or 8.8" lids. Also works with dual 6x9 lids. 

Works with 2014 & up Bags as Well as with 2013 & down Bags

One kit fits equally well with all modern baggers from '98 on up. Does not work with soft or switchback bags. 

Water Proof

Waterproof100% waterproof design. Machined from high-density polyethylene and equipped with stainless hardware and generous gasketing, this kit can take all of the rainwater that you can throw at it.

 

SPEAKERS NOT INCLUDED!!!

Several speakers are a direct bolt-on fit for these mounts. Our favorite speaker for this kit is the Diamond Audio HXM8. These speakers have all of the desirable characteristics of a great pro audio speaker but also offer several additional benefits that make them the clear choice for this application.

 

$ 379.99
American Hardbags Aggressor Pro 80 Single 8" Left & Right Woofer Mounting Kit

Fitment:

Harley Davidson Road Glide, Street Glide, Electra Glide, Road King, Ultra, & CVO Models. Will not work with CVO saddlebag amplifiers. Will work with CVO if you remove the saddlebag mounted amplifiers. Works with factory or aftermarket stretched bags.

The most popular Aggressor Woofer kit is the Pro 80.

 The Pro 80 comes as a pair (left and right) only. The kit includes everything that you will need to properly mount two pro audio 8" woofers (1 each bag) and also reinforce your saddlebags for higher output. Speakers are not included.

  • Two 8" Woofer Mounts (left & Right)
  • CNC Machined HDPE Construction
  • Router Templates Included
  • All American Made Stainless Hardware
  • 2 Powder Coated Steel Grills Included
  • 100% Waterproof
  • Leaves Most of the Bag Available for Storage
$ 379.99
Arc Audio Arc Series 10" Subwoofer System

 All Audio Intensity Enclosures are computer designed for maximum performance, CNC cut for maximum precision and hand assembled with tremendous pride.  The subwoofer system includes woofer preloaded and prewired into enclosure making it ready to install and enjoy!

 

Enclosure Specs:

Woofer(s): Arc Audio ARC series 10"

Number of Subs: 1

Power Handling: 250w RMS / 500w Peak

Design: Sealed (slim)

Enclosure Net Volume(after port/speaker displacement) :  .75 ft^3

Dimensions: 24" Wide x 12" Tall x 7" Deep 

Available Colors : Gray or Black

Final Impedance: 1 ohm / 2 ohm

Weight: 29lbs

$ 399.99
Arc Audio Arc Series 12" Subwoofer system

All Audio Intensity Enclosures are computer designed for maximum performance, CNC cut for maximum precision and hand assembled with tremendous pride.  The subwoofer system includes woofer preloaded and prewired into enclosure making it ready to install and enjoy! Arc Audio subwoofers are not available separately due to company guidelines.

 

Enclosure Specs:

Woofer(s): Arc Audio ARC series 12"

Number of Subs: 1

Power Handling: 350w RMS / 700w Peak

Design: Sealed (slim)

Enclosure Net Volume(after port/speaker displacement) :  .1.1 ft^3

Dimensions: 26" Wide x 14" Tall x 8" Deep 

Available Colors : Gray or Black

Final Impedance: 1 ohm / 2 ohm

Weight: 38lbs

$ 499.99 $ 429.99
Arc Audio MOTO 600.4 4-Channel 600W RMS Ultra Compact Class D Amplifier Previous Demo
Previous Demo Arc Audio Moto 600.4 4 Channel Amplifier.
Comes complete with all hardware but is missing the original box.
 
  • 4-Channels at 4-Ohms: 150W | 4-Channels at 2-Ohms: 150W | 2-Channels at 4-Ohms: 300W
  • Frequency Response: 20Hz - 20kHz | Total Harmonic Distortion: 0.02% THD | Bass Boost: 12dB at 45Hz
  • Fuse Rating: 30A x 2 Internal | Dimensions: 8.25" L x 5" W x 1.75" H | Compatible with all 2 and 4-Ohm Systems
  • Ultra Compact Design Fits inside Most Fairings | Remote Status Display Light Included | Weather Resistant Chasses Design
  • High Frequency Switching Power Supply Delivers more power without compromising sound quality Audiophile Class D output filter networks
      Designed specifically for the motorcycle and power sports market the MOTO 600.4 amplifier is the high-performance solution for today’s extreme music lovers. Capable of over 600 watts at 4 ohms across 4 channels the Moto 600.4 takes your factory stereo from zero to hero in a single package solution.


      When it comes to dynamics and overall sound quality nothing beats raw power except clean power. With the Moto 600.4 amplifier that is exactly what you get delivering 150 watts into 4 channels at 2 or 4 ohms giving your speakers more than enough dynamics power to satisfy even the most demanding listeners without taxing your factory charging system beyond its limits. The Moto 600.4’s patent-pending power supply design achieves a mind staggering 90+ efficiency allowing you to get full power without needing a ton of power from your bike.


      Compact, elegant, and yet full of unmatchable power the Moto 600.4 is small enough to fit inside the factory fairing of all 2000 – 2015 HD full fairing motorcycles without the need of modifications, custom installations or devaluing your motorcycle. Its compact size allows you to achieve that personalized "Big Sound" without the loss of valuable bag space.


  • Multi-channel amplifier (Four Channels)
  • Microprocessor Class-D design
  • Designed and Engineered by Robert Zeff
  • High-frequency power supply design for improved signal transparency and overall sound quality
  • Built in internal fan for additional cooling
  • Remote location status indicator leads for easy relocation of the amplifiers onboard diagnostics indicator.
  • Full range amplifier design
  • PP Coated and treated design components for the highest level of environmental protection
  • Single side plug and play (PNP) connection design
  • Quick Disconnect speaker terminal plugs.
  • Audiophile Class D output filter networks.
  • Detailed microprocessor-controlled protection
  • Large, High-Frequency switching power supplies
  • RCA Inputs are compatible with speaker level inputs.
  • Fault Codes Storage of the last protection code detected
  • Hi Signal to Noise Ratio without compromising power output.
  • Fully Balanced Input Stage significantly increases flexibility
  • Ultra Low ESR, High capacity power supply storage capacitors
  • Bridged Mode Auto Detect Turn-on works with most chip based OEM Head units.
  • Precision filtering isolates the power supply reducing unwanted interference in radio reception
$ 649.99 $ 400.00
Arc Audio XDi 1100.5 !! 5 Channel Amplifier 1100 watts PREVIOUS DEMO

Previous Demo Arc Audio XDI 1100.5 5 Channel Amplifier.

Comes complete with all hardware but is missing the original box.

 
  • XDi 1100.5 - Arc Audio 5-Channel 1100W RMS Class D Full Range Amplifier
  • 4 Channels at 4 ohms: 150 Watts | 4 Channels at 2 ohms: 150 Watts | 2 Channels at 4 ohms: 300 Watts | 1 Channel at 4 ohms: 275 Watts (Sub Channel) | 1 Channel at 2 ohms: 500 Watts (Sub Channel)
  • Frequency Response: 20Hz - 20kHz
  • Frequency Response (Sub): 20Hz - 230Hz
  • Dimensions: 12.42”(L) x 6.268”(W) x 2.162” (H)

 

One amplifier running an entire system without compromise to sound quality of overall performance? Yes, it's true! Robert Zeff has done it again with a single package solution designed to run your mid's/highs and subs all on one single compact packaged amplifier.

The XDi 1100.5 is a compact and elegant design that is small enough to fit just about anywhere in a vehicle allowing you that personalized "Big Sound" without the loss of valuable trunk space.

Capable of 150 watts to each of the main 4-channels the XDi 1100.5 provides enough dynamic and quality power to satisfy most any audio enthusiasts while still leaving enough in reserve for those late night jam sessions. With its elegant brushed aluminum extruded aluminum cosmetic case (XDi Level 2 cosmetics package) and affordable price point, the XDi amplifier series is perfect for the daily driver or the wildest of custom installations.

  • Multi-channel amplifier (5-channels)
  • Microprocessor Class-D design
  • Designed and Engineered by Robert Zeff
  • High-frequency power supply design for improved signal transparency and overall sound quality
  • Remote Bass Boost Control (Included)
  • Extruded Aluminum CNC chassis design (Level 2 XDi Cosmetics)
  • Full range amplifier design
  • Single-side connection design
  • Nickel Plated RCA Terminals
  • Quick Disconnect speaker terminal plugs.
  • Audiophile Class D output filter networks.
  • Detailed microprocessor-controlled protection
  • Large, High-Frequency switching power supplies
  • RCA Inputs are compatible with speaker level inputs.
  • Fault Codes Storage of the last protection code detected
  • Hi Signal to Noise Ratio without compromising power output.
  • Fully Balanced Input Stage significantly increases flexibility
  • Ultra Low ESR, High capacity power supply storage capacitors
  • Flexible mounting orientation for vertical or horizontal installations.
  • Next generation high-speed Class D technology powering all XDi amplifiers.
  • Bridged Mode Auto Detect Turn-on works with most chip based OEM Headunits.
  • Precision filtering isolates the power supply reducing unwanted interference in radio reception
  • Block type terminal connections
$ 749.99 $ 445.00
Arc Audio XDi 1200.6 Amplifier 6 Channel Full Range Class D - Previous Demo
Used Arc Audio Xdi 1200.6 6 Channel Amplifier.
Comes complete with all hardware but is missing the original box.
 
 
  • XDi 1200.6 - Arc Audio 6-Channel 1200W RMS Class D Full Range Amplifier
  • 4 Channels at 2 ohms: 150 Watts | 2 Channels at 4 ohms: 300 Watts | 2 Channels at 4 ohms: 150 Watts (Ch 5&6) | 2 Channel at 2 ohms: 300 Watts (Ch 5&6) | 1 Channel at 4 ohms: 600 Watts (Ch 5&6)
  • Frequency Response: 20Hz - 20kHz
  • Bass Boost: 12dB at 45Hz (Ch 5&6)
  • Dimensions: 13.0”(L) x 6.268”(W) x 2.162” (H)
$ 849.99 $ 475.00
ARC AUDIO XDI 450.4 4-Channel Amplifier Previous Demo
Previous Demo Arc Audio Xdi 450.4 4 Channel Amplifier.
Comes complete with all hardware but is missing the original box.
 
 
  • XDi 450.4 - Arc Audio 4-Channel 450W XDi V2 Amplifier
  • 4 Channels at 4 ohms: 85 Watts | 4 Channels at 2 ohms: 125 Watts | 2 Channels at 4 ohms: 250 Watts
  • Selectable Impedance optimization allows full power output at either 2 or 4-ohm stereo operation. (On Selected Models)
  • Flexible mounting orientation for vertical or horizontal installations.
  • Dimensions: 8.173"(L) x 6.268(W) x 2.086"(H)
$ 349.99 $ 180.00
Arc Audio XDI 600.4 4 Channel Amplifier Previous Demo
Demo Arc Audio Xdi V2 600.4
4 Channel Amplifier.
Comes complete with all hardware including bass knob (not pictured) but is missing the original box.
 
  • 4 Channels @ 4 ohms 150 Watts
  • 4 Channels @ 2 ohms 150 Watts
  • 2 Channels @ 4 ohms 300 Watts (Bridged)
  • Frequency Response 20Hz - 20kHz
  • Crossover Range 50Hz - 550Hz
  • Bass Boost Variable 0 - 12dB
  • Bass Boost Freq. 45Hz
  • Remote Level Control Included Yes - LP Front Ch. Only
  • Input Sensitivity (Low) 200mV - 3.5V
  • Fuse 2 x 30 amp
  • Cosmetic Trim XDi Level 2
  • Dimensions 9.020"(L) x 6.268"(W) x 2.162(H)
When it comes to dynamics and overall sound quality nothing beats raw power except clean power. With the XDi600.4 amplifier that is exactly what you get delivering 150 watts into 4 channels at 2 or 4 ohms giving your mids and highs more than enough dynamics power to satisfy even the most demanding or critical of listeners. 
 
For those installations where more is better the XDi 600.4 is optimized for use in combination with one of the XDi mono block amplifiers complimenting just about any level of subwoofers combination giving you the most flexibility of any product line out there. With bridgeable outputs capable of 2 channels x 300 watts per channel and remote level control the XDi 600.4 is also an optimum selection for those needing a 3 channel amp, it even comes with the remote level control for on the fly sub adjustment. 
 
With its elegant brushed aluminum extruded aluminum cosmetic case (XDi Level 2 cosmetics package) and affordable price point, the XDi 600.4 amplifier series is perfect for the daily driver or the wildest of custom installations. 
 
Compact, elegant, and yet full of unmatchable power the XDi1200.6 multi-channel amplifier is small enough to fit just about anywhere in a vehicle allowing you that personalized "Big Sound" without the loss of valuable trunk space. 
 
  • Multi-channel amplifier (Four Channels)
  • Microprocessor Class-D design
  • Designed and Engineered by Robert Zeff
  • High-frequency power supply design for improved signal transparency and overall sound quality
  • Remote Bass Boost Control (Included)
  • Extruded Aluminum CNC chassis design (Level 2 XDi Cosmetics)
  • Full range amplifier design
  • Single-side connection design
  • Nickel Plated RCA Terminals
  • Quick Disconnect speaker terminal plugs.
  • Audiophile Class D output filter networks.
  • Detailed microprocessor-controlled protection
  • Large, High-Frequency switching power supplies
  • RCA Inputs are compatible with speaker level inputs.
  • Fault Codes Storage of the last protection code detected
  • Hi Signal to Noise Ratio without compromising power output.
  • Fully Balanced Input Stage significantly increases flexibility
  • Ultra Low ESR, High capacity power supply storage capacitors
  • Flexible mounting orientation for vertical or horizontal installations.
  • Next generation high-speed Class D technology powering all XDi amplifiers.
  • Bridged Mode Auto Detect Turn-on works with most chip based OEM Headunits.
  • Precision filtering isolates the power supply reducing unwanted interference in radio reception
  • Block type terminal connections
$ 549.99 $ 325.00
Arc Audio XDI Series Subwoofer System

All Audio Intensity Enclosures are computer designed for maximum performance, CNC cut for maximum precision and hand assembled with tremendous pride.  The subwoofer system includes woofer preloaded and prewired into enclosure making it ready to install and enjoy! Arc Audio Subwoofers are not sold separately due to company guidelines.

 

Enclosure Specs:

Woofer(s): Arc Audio XDI series 12"

Number of Subs: 1

Power Handling: 250w RMS / 500w Peak

Design: Ported

Enclosure Net Volume(after port/speaker displacement) :  2.0 ft^3

Dimensions: 26" Wide x 14" Tall x 8" Deep 

Available Colors : Gray or Black

Final Impedance: 1 ohm or 4 ohm

Weight: 47lbs

$ 329.99 $ 299.99
Arc Audio XDi650.1 Class D High Performance Amplifier 650 watts Previous Demo

Previous Demo Arc Audio Xdi 650.1 Monoblock Subwoofer Amplifier.
Comes complete with all hardware but is missing the original box.

 

  • Bridged Mode Auto Detect Turn-On works with most chip based OEM Headunits.
  • Fully Balanced Input Stage significantly increases flexibility.
  • RCA Inputs are compatible with speaker level inputs.
  • Micro Processor controlled protection including Short Circuit, Thermal, DC Offset, Over-voltage, and Under-voltage.
  • Fault Code Storage of the last protection code detected.
  • Quick Disconnect speaker terminal plugs.
  • Audiophile Class D output filter networks.
  • Remote Bass Level control capability for quick tweaking of the low-frequency level.
  • 1 Channel at 4 ohms: 185 Watts
  • 1 Channel at 2 ohms: 350 Watts
  • 1 Channel at 1 ohms: 650 Watts
  • Frequency Response: 20Hz - 230kHz
  • Crossover Range: 30Hz - 230Hz 24dB
  • Bass Boost: Variable 0-12dB
  • Bass Boost Freq.: Variable 30Hz - 125Hz
  • Remote Level Control Included: Yes
  • Input Sensitivity (Low): 200mV - 3.5V
  • Fuse: 2 x 30 amp
  • Cosmetic Trim: XDi Level 1
  • Dimensions: 9.020"(L) x 6.268"(W) x 2.162(H)
$ 399.99 $ 200.00
Arc Audio XDi850.5 5-Channel 850W RMS Amplifier Previous Demo
Previous Demo Arc Audio XDI 850.5 5 Channel Amplifier.
Comes complete with all hardware but is missing the original box.
 
 
  • XDi 850.5 - Arc Audio 5-Channel 850W RMS XDi V2 Amplifier
  • 4 Channels at 4 ohms (Ch 1-4): 85 Watts 4 Channels at 2 ohms (Ch 1-4): 125 Watts 2 Channels at 4 ohms (Ch 1-4): 250 Watts 1 Channel at 4 ohms: 225 Watts 1 Channel at 2 ohms: 400 Watts
  • Frequency Response: 20Hz - 20kHz
  • Crossover Range (Ch 1-4): 50Hz - 500Hz Crossover Range (Ch 5): 30Hz - 230Hz 24dB
  • Dimensions: 12.42"(L) x 6.268"(W) x 2.162(H)
 
One amplifier running an entire system without compromise to sound quality of overall performance? Yes, it's true! Robert Zeff has done it again with a single package solution designed to run your mid's/highs and subs all on one single compact packaged amplifier. 
 
The XDi 850.5 is a compact and elegant design that is small enough to fit just about anywhere in a vehicle allowing you that personalized musical experience without the loss of valuable trunk space in a single package. 
 
Capable of 85 watts to each of the main 4-channels the XDi 850.5 provides enough dynamic and quality power to satisfy most any audio enthusiasts without straining or reaching the limits of the amplifier design. Old school "Grunt" but with next century technology and miniaturization, this isn't your everyday Class D amplifier. 
 
Trimmed with ARC Audio's level 1 XDi series cosmetics the simple but elegantly designed stamped top cover design is accented with a diamond cut aluminum badge and a texture coated finish. Removing the top screws allows users to rotate the badge literally into any direction improving the amplifiers flexibility for installation. If you desire the cosmetics of the Level 2 product, no problem. The XDi 850.5 is upgradable by purchasing the XDI Trim kit and you can have the same cosmetics and display features of the more expensive Level 2 cosmetics. 
 
  • Multi-channel amplifier (5-channels)
  • Microprocessor Class-D design
  • Designed and Engineered by Robert Zeff
  • High-frequency power supply design for improved signal transparency and overall sound quality
  • Remote Bass Boost Control (Included)
  • Level 1 cosmetics package - Texture coated stamped steel cosmetic cover with aluminum logo badge. (upgradable to level 2 cosmetics)
  • Full range amplifier design
  • Single-side connection design
  • Nickel Plated RCA Terminals
  • Quick Disconnect speaker terminal plugs.
  • Audiophile Class D output filter networks.
  • Detailed microprocessor-controlled protection
  • Large, High-Frequency switching power supplies
  • RCA Inputs are compatible with speaker level inputs.
  • Fault Codes Storage of the last protection code detected
  • Hi Signal to Noise Ratio without compromising power output.
  • Fully Balanced Input Stage significantly increases flexibility
  • Ultra Low ESR, High capacity power supply storage capacitors
  • Flexible mounting orientation for vertical or horizontal installations.
  • Next generation high-speed Class D technology powering all XDi amplifiers.
  • Bridged Mode Auto Detect Turn-on works with most chip based OEM Headunits.
  • Precision filtering isolates the power supply reducing unwanted interference in radio reception
  • Block type terminal connections
$ 549.99 $ 285.00
Audio Intensity Gift Card, $25, $50, $100, $250 or $500 Increments

Shopping for someone else but not sure what to give them? Give them the gift of sound quality with a Audio Intensity gift card.

Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees and do not expire!

$ 25.00
Audio Intensity Logo Unisex Shirt - Short sleeve t-shirt
This is a classic tee that has a light feel. Made of 100% ringspun cotton (except for heather colors, which contain 10% polyester). Shirts tend to run small, if you're in between sizes order larger to be safe.

• 100% ringspun lightweight cotton
• Pre-shrunk
• Tubular construction
• Shoulder-to-shoulder tape
• Seamless collar
• Double-needle sleeve and bottom hem
$ 25.00
Audio Intensity Pullover Sweatshirt
A sturdy and warm sweatshirt bound to keep you warm in the colder months. A pre-shrunk, classic fit sweater that's made with air-jet spun yarn for a soft feel.

• 8.0 oz., 50/50 cotton/polyester
• Pre-shrunk
• Classic fit
• Reduced pilling and softer air-jet spun yarn
• 1x1 athletic rib knit collar, cuffs and waistband, with spandex
• Double-needle stitched collar, shoulders, armholes, cuffs and waistband
$ 33.00
Audio Intensity Structured Twill Cap
With its curved bill, athletic shape, and silver undervisor, this is an ideal multi-purpose hat.

• 63% polyester/34% cotton/ 3% spandex twill
• Curved bill
• Silver undervisor
• Sewn eyelets
• Sizes: S/M (6 ¾” - 7 ¼”), L/XL (7 ⅛” - 7 ⅝”)
• Fitted, six-panel, mid-profile
• Structured buckram backing
$ 25.00
Audio Intensity Women’s Crop Tee
The season's trendiest garment - the crop top. This top is tight-fitting but still incredibly comfortable, and it hits just above the navel.

• 52% combed and ring-spun cotton/48% polyester
• 40 singles thread weight
• Form fitting
• Side seamed
$ 26.00
Brax Logo Unisex Shirt - Short sleeve t-shirt
This is a classic tee that has a light feel. Made of 100% ringspun cotton (except for heather colors, which contain 10% polyester).

• 100% ringspun lightweight cotton
• Pre-shrunk
• Tubular construction
• Shoulder-to-shoulder tape
• Seamless collar
• Double-needle sleeve and bottom hem
$ 25.00
Brax MX4

Based on our basic principles “handmade” and “made in Germany” we have designed the amplifier BRAX MX4 according to the latest technical knowledge. The result is both a top-class amplifier and a true high-end statement: A long-lasting period of research and development, innovative technologies and an extremely fastidious manufacturing combined with the love for music as the driving force for our work make the BRAX MX4 doubtlessly to the most powerful and best sounding 4-channel amplifier of the world.

Concerning the straight design of the MX4-amplifier and the sophisticated layout of the circuit board, we have deliberately set crossovers and filter functions aside. Short signal paths combined with selected components “made in Germany” ensure pristine listening pleasure and underline the puristical high-end philosophy of the BRAX MX4.

In order to completely eliminate power differences and manufacturing tolerances, we only use hand-selected transistors for the production of each MX4-amplifier. Concerning power-, voltage- and resistance data we select them in more than 300 categories. Thus, all transistors harmonize perfectly in terms of technical specifications. In doing so, our BRAX amplifiers obtain a worldwide reference status. Striving for ultimate perfection, Audiotec Fischer is the only manufacturer of audiophile products on the globe that conducts this extensive and time-consuming hand-selection. Of course, all the instruments that are necessary for this procedure are in-house developments.

Two separate power supplies for the channels A/B and C/D account for an endlessly stable power output. The amplifier’s output is even stable when you connect loudspeakers and a woofer with different impedances to the BRAX MX4. In order to control voltage fluctuations, an external power stabilizer can directly be connected to the power supply. Moreover, the solid and gold-plated terminals for cables up to 50mm² make another contribution to an ideal power supply of the BRAX MX4.

At the end of the day, the BRAX MX4 can be described as an amplifier with a sound rendition that is highly dynamic, powerful in an awesome way and swift as an arrow. The underlying philosophy is topped-off by a packaging in a precious wooden box. Furthermore, every single amplifier is manufactured individually and its respective serial number is recorded in our database. The amplifier BRAX MX4 is only produced on demand and of course, we can respond to our customer’s requirements. In this way, each amplifier is a valuable individual item that rightly deserves the title “high-end made in Germany”.

 

  • Optical digital inputs used for the upcoming BRAX DSP (2 x Toslink)
  • Separate terminal for connecting a BRAX Power Stabilizer directly to the switching transistors
  • Eight capacitors (with a total capacity of 40,000 microFarad) take care of an extremely high current impulse load
  • 200 Ampere high-performance switching transistors
  • Interference-free power supply due to optimized suppression coil up to 300 Ampere with ultra-low internal resistance
  • Especially developed transformers with highly-efficient core materials guarantee a total performance of more than 1,800 Watts
  • High efficiency due to super-fast Schottky power diodes with more than 160 Ampere in total
  • Below the lateral PC-boards, there are in total 32 hand-selected high-end MOSFET transistors which account for brilliant sound
  • Processor controlled operating data management of the amplifier and power supply. It also controls the optional fan. Furthermore, the processor is supervising the whole amplifier and shuts it down in case of malfunctions
  • Engraved serial number on the stainless steel plate
  • Impedance independent output power of around 280 Watts per channel
  • 4-, 2- and 1-Ohms stable
  • Optional fan at the bottom plate with processor supported fan control
  • The solid heatsink, made of a special aluminum alloy takes care of a perfect cooling of power supply transistors and those of the amplifier
Output power RMS  
- @ 4 Ohms 4 x 275 Watts
- @ 2 Ohms 4 x 280 Watts
- @ 1 Ohm 4 x 285 Watts
- bridged @ 4 Ohms 2 x 550 Watts
- bridged @ 2 Ohms 2 x 560 Watts
Amplifier technology Class AB
Inputs 4 x Cinch
2 x Optical SPDIF (12 - 96 kHz) 
1 x Remote In
Input sensitivity RCA / Cinch 1.0 - 8.0 Volts
Input impedance RCA / Cinch 10 kOhms
Input impedance high-level
Outputs 4 x Speaker output
Output voltage RCA / Cinch
Signal converter for digital input BurrBrown 24 Bit DA converter
Frequency response 10 Hz - 80 kHz
Bass boost
Highpass
Lowpass
Bandpass
Subsonic
Phase
Slope high- / lowpass
Slope subsonic / lowpass
Signal-to-noise ratio digital input > 110 dB (A-weighted)
Signal-to-noise ratio analog input > 110 dB (A-weighted)
Distortion (THD) < 0.001 %
Damping factor > 1000
Operating voltage 9 - 16 Volts
Idle current 8.5 A
Fuse 6 x 25 A LP-Mini-fuse (APS)
Additional features Colour Protection System, BRAX Power Stabilizer connector
Dimensions (H x W x D) 79 x 360 x 360 mm / 
3.11 x 14.17 x 14.17"
Net weight 11.5 kg

 

 

$ 6,250.00 $ 3,000.00
BRAX NOX4B DSP High-End 4-channel amplifier with integrated DSP
Brand New. Unopened
 
 
If you want the best possible car audio system with total control over sound quality, then BRAX's NOX4BDSP 4-channel amplifier should be powering your music. This gorgeous, hand-crafted amplifier features a sophisticated built-in digital signal processor, bringing an unprecedented level of high-fidelity amplification and sound processing into the mobile environment. The NOX4BDSP sends 100 watts RMS to each of your front and rear speakers. Bridged for 2-channel operation, the NOX4BDSP puts out up to 340 watts RMS each to a couple of subwoofers.
 

Product Highlights:

  • 4-channel car amplifier with a built-in 6-channel digital signal processor
  • 24-karat gold-plated RCA input, power, and speaker connections
  • double-sided circuit boards with silver-soldered components
4-channel amplifier
  • 100 watts RMS x 4 at 4 ohms (170 watts RMS x 4 at 2 ohms)
  • 340 watts RMS x 2 bridged at 4 ohms
  • Class AB amp technology
  • hand-selected and matched transistors
6-channel digital signal processor (DSP)
  • DSP settings and adjustments made via laptop or PC through a USB port
  • download DSP PC-Tool Software from audiotec-fischer.com or helixhifi.com
  • 6 assignable inputs with 2 auxiliary outputs
  • channel settings can be separate or linked together
  • time alignment in 7 mm increments
  • 30-band graphic EQ on every channel
  • adjustable high- and low-pass filters (20-20K Hz) with selectable slopes (6, 12, 18, 24, 30 dB/octave)
  • selectable filter characteristics
    • Butterworth: sharp transition, suitable for most applications
    • Bessel: gradual transition, suitable for smooth speakers, but not subs
    • Linkwitz: recommended for high-end speakers only, not subs
    • Chebyshev: very sharp transition, useful as high-pass for tweeters or low-pass for subs
    • Self-Define: selectable Q-Factor, 12 dB/octave slope only
  • phase adjustment: switchable 0/180 degrees on front and rear channels, adjustable 0 to 360 degrees on subwoofer channels in 22.5-degree increments
  • 2- or 1/0-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • fuse rating: 100A x 1
  • 12-5/8"W x 2-1/4"H x 12-5/8"D
$ 3,100.00 $ 2,200.00
Brax Structured Twill Cap
With its curved bill, athletic shape, and silver undervisor, this is an ideal multi-purpose hat.

• 63% polyester/34% cotton/ 3% spandex twill
• Curved bill
• Silver undervisor
• Sewn eyelets
• Sizes: S/M (6 ¾” - 7 ¼”), L/XL (7 ⅛” - 7 ⅝”)
• Fitted, six-panel, mid-profile
• Structured buckram backing
$ 25.00
Clarus 6.5” Midbass Drivers - Pair

The Clarus series is Hybrid Audio Technology’s “Stage IV” offering, an option that has received the praises of the mass media and users worldwide. All design cues for the Clarus series were taken from the Stage V Legatia series. Clarus was reviewed by Car Audio & Electronics Magazine as one of the finest component sets ever tested, at any cost, in the past twenty years of the magazine’s review of car audio products. Clarus products come in two component set kits, the C51-2 (5.25-inch two-way component set), and the C61-2 (6.5-inch two-way component set).

This product listing is for the 6.5" Midbass Drivers featured in the Clarus 6.5" Component Set listed here but without the added goodies.

 

$ 649.99 $ 519.99
Clarus Tweeter Kit (With Mounting Kit) - Pair

This kit provides you with the Clarus tweeters as well as the mounting kit.

The Mounting Kit includes 3 tweeter mounting bezels - Flush, Surface, 45 Degree Angle.

$ 189.99 $ 149.99
DC Audio 1.2k amplifier

The DC Audio 1.2k competition series amplifier is a 1,200 watt mono block. It is capable of running up to 16 volts for up to1,450 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob. For power inputs it will accept 4 awg for power and 4 awg for ground.

$ 485.00 $ 384.99

Scroll To Top

Sale

Unavailable

Sold Out