Proline X PO 15-S W MX1522 sealed wedge, front baffle with gloss black insert and pre-wired leads, 29.2 by 18 inches.
Proline X PO 15-S W MX1522 sealed wedge, side profile with recessed terminal cup, 16.5 inch base, 18 inches tall.
Proline X PO 15-S W MX1522 sealed wedge, front baffle with gloss black insert and pre-wired leads, 29.2 by 18 inches.
Proline X PO 15-S W MX1522 sealed wedge, side profile with recessed terminal cup, 16.5 inch base, 18 inches tall.

Proline X

Dayton Audio Max-X MX15-22 Box: Sealed 15" Wedge Enclosure

SKU: PO 15-S W MX1522 BB

QUICK SPECS
  • Best For: Dayton Audio Max-X MX15-22 Trunk-Fit Builds
  • Net Volume: 2.43 cu ft (2.62 cu ft Gross)
  • Driver Match: Dayton Audio Max-X MX15-22 (dual 2 ohm)
  • Construction: Rear-Firing Wedge | V-Groove/Dado | Double 1.5" Baffle | Threaded Inserts Installed
Shipping Icon
Shipping Included No freight charges at checkout. What you see is what you pay.
USA Flag Rounded
Built in Tennessee CNC cut from 3/4" Langboard Elite MDF. V-groove and dado joinery.
Tools icon: hands-on mobile audio expertise since 1985
Advanced Terminal Cup Built in-house. ABS/Carbon Fiber. Stainless steel hardware. Copper ring terminals.
$ 469.99
In Stock and Ready to Ship
Shop Pay Financing available. Choose Shop Pay Installments at checkout.
Proline X PO 15-S W MX1522 sealed wedge, front baffle with gloss black insert and pre-wired leads, 29.2 by 18 inches.

Dayton Audio Max-X MX15-22 Box: Sealed 15" Wedge Enclosure

More enclosures cut for Dayton Audio subwoofers: Dayton Audio Subwoofer Boxes

Enclosure Type Sealed
External Dimensions 29.24" W x 18" H x 16.54" D at base tapering to 9.99" D at top
Gross Volume 2.62 cu ft
Net Volume 2.43 cu ft
Shipping Weight 58 lbs
Front Panel Thickness 1.5"
INSTALLER'S TAKE

2.43 cubic feet: Qtc 0.707 on the MX15-22 (dual 2 ohm), F3 38.4 Hz.

The 9.13 inch motor clears the raked back with 0.75 to spare; the airspace sets the rest of the cabinet.

Dayton's spec sheet holds together on every check I run. Displacement is the one figure they do not give, so it is estimated.

Inserts are pressed at Dayton's bolt circle, so the driver bolts straight in. Sealed, so leave the polyfill as it is and run it at 800 watts or under per driver.

Product Details
Specifications
Performance Graphs
Customer Installs
Materials
Product Details

Performance Optimized Wedge | Dayton Audio Max-X MX15-22

15" Sealed Wedge Enclosure | Rear-Firing Trunk-Load Design

2.43 ft3 Net2.62 ft3 GrossQtc 0.71Single Chamber Wedge29.24" x 18" x 9.99/16.54"Built in Tennessee

The Dayton Audio Max-X MX15-22 in a Sealed Wedge

The MX15-22 is Dayton's 15 inch Max-X: a seamless paper and glass fiber dish cone, a custom-tooled rubber surround that keeps cone area on a long throw, dual spiders, an extensively vented 2.5 inch dual 2 ohm coil and a stacked ferrite motor on a steel basket, rated 800 watts RMS with 19 mm of one-way excursion, 9.13 inches of mounting depth on a 15.42 inch frame. Every Thiele-Small figure comes from Dayton's own spec sheet, measured with the coils in series, and it holds together: the moving mass matches the published Vas and cone area within 2 percent, Qes and Qms land within 4 percent of the printed Qts, and Qes follows from Bl, Re and Mms. The printed Qts of 0.40 is the measured figure and the one used here.

2.43 cubic feet net on Dayton's published figures: the MX15-22 (dual 2 ohm) reads Qtc 0.707 with resonance at 38.4 Hz and half power at 38.4 Hz. That is maximally flat: the flattest a sealed box gets, with no lift near resonance and fc and F3 landing together.

Trunk-Load Wedge Design Explained

The driver mounts on the vertical trunk-lid-side face and fires rearward into the trunk cavity.

Seat-Side Face Matches Seat Lean

Angled face matches the roughly 20 degree factory seat lean.

Trunk-Lid-Side Face Fires the Woofer

Vertical baffle, cone firing rearward into the trunk cavity.

Trunk Cavity Loading

The trunk acts as an acoustic extension for a smoother presentation.

Preserves Trunk Cargo Space

The wedge tucks against the seat back and the space in front stays usable.

Engineered for the Dayton Audio Max-X MX15-22

Anechoic half power lands at 38.4 Hz, before any cabin gain. Dayton does not publish driver displacement (its Vd is the cone's swept volume), so an estimated 0.180 cubic feet per driver is taken out of the net figure.

Alignment Numbers

Driver System Qtc fc F3
Max-X MX15-22 dual 2 ohm Qtc 0.707 38.4 Hz 38.4 Hz

Mounting Geometry

The baffle is cut to 14.01 in for Dayton's 15.42 in frame. The rear panel rakes 20 degrees, so the cavity deepens from 9.99 in at the top to 16.54 in at the base, and the 9.13 in motor clears it with 0.75 in to spare. Dayton prints the MX15-22's bolt circle, 14.65 inches, so the threaded inserts are pressed into the baffle at the shop and stainless machine screws are included: the driver drops in and bolts down.

What the Numbers Rest On

Langboard Elite MDF

Premium 3/4 in MDF throughout.

V-Groove and Dado Joinery

CNC cut V-grooves at every panel intersection, sides and brace seated in dados.

Double-Layer 1.5" Front Baffle

Two bonded 3/4 in MDF sheets at the driver face, the outer layer machined as a flush recess.

Dayton's Published Parameters

MX15-22 (dual 2 ohm): Fs 21.7 Hz, Qts 0.4, Qes 0.46, Qms 4.27, Vas 146 L, Mms 348 g, Bl 20.6 N/A, Re 3.99 ohm. Cone area 820 cm2. Xmax 19 mm (one-way, as Dayton publish it).

Wiring the Dayton Audio Max-X MX15-22 to Your Amplifier

Dayton builds the MX15-22 in one version, dual 2 ohm: two 2 ohm coils, 4 ohms in series or 1 ohm in parallel. Series to 4 ohms is the safe default; run the 1 ohm parallel load only on an amplifier rated 1 ohm stable. Confirm the final load against your amplifier's minimum stable impedance before powering the system.

Power handling is 800 watts RMS per driver. Aim for roughly 560 to 800 watts at the impedance you wire.

Built in Tennessee, Backed by Audio Intensity

Cut and assembled in Tullahoma, Tennessee on our own CNC equipment. Finished in plush black carpet with the gloss black acrylic baffle insert, one pre-wired terminal cup, 12 gauge OFC to the driver position. Polyfill wall lining installed. Threaded inserts pressed at Dayton's bolt circle, stainless machine screws included. 1 year limited warranty. Enclosure only, the driver is purchased separately. Call or text 931-563-5151.

Dayton Audio Max-X MX15-22: Cut for One Driver

2.43 cubic feet net at Qtc 0.71, F3 38.4 Hz, cut direct fit and built to order in Tennessee.

Specifications
SpecificationValue
SeriesProline X Performance Optimized Wedge
Compatible DriverDayton Audio Max-X MX15-22 (dual 2 ohm), quantity 1. Direct fit
ConfigurationSingle 15 inch, single chamber sealed wedge
Mounting PositionTrunk or cargo area, tall face against the rear seat back
Firing DirectionRearward into the trunk. Not a down fire design, no feet included
External Width29.24 in
External Height18 in at the seat face
External Depth16.54 in at the base, tapering to 9.99 in at the top
Internal Volume, Gross2.62 cu ft
Internal Volume, Net Acoustic2.43 cu ft after the brace and the driver displacement
Driver Mounting Depth9.13 in required; 0.75 in clearance above the motor against the raked rear panel
Alignment, MX15-22 (dual 2 ohm)Qtc 0.707, fc 38.4 Hz, F3 38.4 Hz anechoic
Woofer Opening14.01 in, cut for Dayton's frame
Frame Outer Diameter15.42 in
Bolt Circle14.65 in, Dayton spec; threaded inserts pre-installed
Driver Displacement0.180 cu ft, estimated; Dayton publishes none
MX15-22 (dual 2 ohm) Fs / Qts / Qes / Qms / Vas21.7 Hz / 0.4 / 0.46 / 4.27 / 146 L
Driver Sd820 cm2, Dayton spec
Xmax19 mm, one-way, as Dayton publish it
Driver Power Handling800 W RMS
Wiring OptionsDayton builds the MX15-22 in one version, dual 2 ohm: two 2 ohm coils, 4 ohms in series or 1 ohm in parallel. Series to 4 ohms is the safe default; run the 1 ohm parallel load only on an amplifier rated 1 ohm stable.
Parameter SourceDayton Audio spec sheet
MaterialLangboard Elite MDF
ConstructionCNC cut, V-groove and dado joinery
Panel Thickness0.75 in
Front Baffle1.5 in double baffle, outer layer machined as a flush recess
Internal BracingWindowed brace, dadoed to the shell
Driver MountingThreaded inserts pre-installed at Dayton's bolt circle; stainless machine screws included
Terminal CupsOne Proline X ABS and carbon fiber composite, side mounted, pre wired 12 gauge OFC
Acrylic InsertGloss black acrylic baffle insert standard; None variant minus $20
DampingLight polyfill wall lining, does not alter acoustic volume
CarpetPlush black
Shipping Weight58 lb
Warranty1 Year Limited
Built InTullahoma, Tennessee
Performance Graphs
Net airspace
2.43
cu ft
System Qtc
0.71
sealed
Half power
38.4
Hz · F3
Xmax at
781
W RMS · no filter
With 25 Hz subsonic
1223
W RMS · +57%
Amplifier
800
W RMS recommended
This enclosure holds 2.43 cu ft net . In it the Dayton Audio MX15-22 runs a system Qtc of 0.71 with half power at 38.4 Hz, and the cone reaches its 19.0 mm travel limit at 781 W, below the driver’s 800 W thermal rating, so travel is what stops you here, not heat. Run a subsonic filter at 25 Hz and that becomes 1223 W — +442 W, or 57 percent more power for the same 19.0 mm of travel.

01Is it a sealed driver?

Efficiency bandwidth product places the motor before anything else is decided.

EBP = Fs ÷ Qes = 47.2
SEALED 0–50 TRANSITION 50–100 PORTED 100–150 0 50 100 150 MX15-22 47.2
MX15-22 · EBP 47.2
EBP under 50 means a motor that wants a sealed load. The MX15-22 sits at 47.2, inside that band, which is why this is a sealed build rather than a ported one.

02What the box does to it

2.43 cu ft against a 146.0 L Vas.

α = Vas ÷ Vb = 2.12  ·  Fc = Fs√(α+1) = 38 Hz  ·  Qtc = 0.71
20 30 50 70 100 150 200 +6 +0 -6 -12 -18 -24 FREQUENCY · Hz LEVEL · dB −3 dB
MX15-22 · Qtc 0.71, Fc 38 Hz, F3 38.4 Hz
The box lifts resonance from 21.7 Hz free-air to 38 Hz and half power lands at 38.4 Hz, anechoic, before any cabin gain. Parameters are Dayton Audio’s own spec sheet, measured with the two 2 ohm coils in series. Driver displacement is not published and is estimated.

03The watts that reach Xmax (in this enclosure)

Travel scales with the square root of power, so there is one wattage that puts the cone exactly on 19.0 mm — and a bigger one once a subsonic filter stops it wasting travel below the passband.

PXmax = 781 W unfiltered  →  1223 W with a 25 Hz subsonic
20 30 50 70 100 150 200 0 4 8 12 16 20 24 FREQUENCY · Hz CONE TRAVEL · mm PAST LINEAR TRAVEL · Xmax 19.0 mm 781 W reaches Xmax here
MX15-22 · 781 W, no filterMX15-22 · 1223 W with subsonic at 25 Hz, 24 dB/octXmax 19.0 mm one-way
Every trace touches the limit and no further, because each is drawn at the exact power that puts that coil on 19.0 mm. Unfiltered that is 781 W, reached first at 20 Hz. It sits under the 800 W the driver can take thermally, so the enclosure sets the ceiling, not the voice coil. The dashed traces are the same driver behind a subsonic filter at 25 Hz, 24 dB/oct: stopping the cone wasting travel below the passband lets it take 1223 W before hitting the same 19.0 mm. That is 57 percent more amplifier for the price of one filter setting.
ParamValueUnitNote
Fs21.70Hzfree-air resonance
Qts0.400MX15-22
Vas146.00Lequivalent compliance
Sd819.8cm²effective piston area
Xmax19mmone-way, as Dayton publish it
Pe800Wcontinuous RMS
SPL87.0dB1 W / 1 m, derived from T/S

Driver parameters as published by Dayton Audio spec sheet. Curves computed against this enclosure’s actual net airspace.

Customer Installs
Materials
Material

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Performance Series enclosure is CNC-cut from Langboard Elite MDF, 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure, because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications

Langboard Elite MDF: Published Mill Data

Property Value Why It Matters
Panel Stock Langboard Elite MDF Named, verifiable panel source, not generic "high-density MDF"
Thickness 3/4" (18mm) Industry standard for subwoofer enclosures; panels below this flex under pressure
Density 48.5 lbs/ft³ Higher density = less porosity, better screw retention, reduced resonance
Internal Bond 200 psi Measures resistance to delamination under sustained internal pressure. The most enclosure-relevant spec on this sheet
Modulus of Rupture (MOR) 4,200 psi Bending strength before the panel breaks, relevant for larger unsupported baffle spans
Modulus of Elasticity (MOE) 410,000 psi Stiffness under load; higher MOE means less panel flex under bass pressure, less resonance
Face Screw Holding 325 lbs How firmly the panel surface holds a screw; critical for baffle joint integrity over time
Edge Screw Holding 250 lbs Panel edge retention, relevant for every joint that isn't face-to-face
Internal Bond

200 psi: The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually. The symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE: Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness, its resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level, not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge: Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint, where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Performance Series enclosure is not going anywhere.

Sourcing

Named Panel Stock: Not "Premium MDF"

The phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification. It is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements, and in how the box holds up two years into daily use.

CNC-Cut to Spec

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.

Handcrafted in USA

Handcrafted in USA

Hand-assembled at our facility in Tullahoma, TN. Every enclosure is inspected before it ships.

Tuned to the Build

Tuned to the Build

Internal volume and port geometry are calculated to spec and CNC-cut to exact dimensions. The box performs the same way every time.

Frequently Asked Questions

Does this fit the Dayton Audio Max-X MX15-22, and will any other 15 inch fit?

Why 2.43 cubic feet, and what alignment does it target?

What amplifier power should I run, and how should I wire it?

Why the wedge angle, and why rear-firing into the trunk?

Why is the front baffle double-layered?

What is the expected low-frequency extension?

Do I need to add polyfill or damping?

Is the driver included, and are the threaded inserts installed?

Related Articles