Auto Subwoofer Specs: Why Size Tells You Almost Nothing
Three 10-inch subwoofers, three completely different machines. A spec-sheet walkthrough using dr...
Read Article →JBL
SKU: CLUB102SL
JBL Club Series Shallow Subwoofer
A 10 inch subwoofer that needs only 3-1/4 inches of mounting depth, with a switch on the terminal cup that sets it to 2 or 4 ohms. The Club 102SL handles 350 watts RMS on an aluminum cone and fits the thin sealed boxes, behind-seat enclosures and door or floor panels a full-depth 10 cannot.
JBL's Selectable Smart Impedance (SSI) switch sits on the input terminal. Flip it to 2 ohms to get more power from a mono amplifier, or to 4 ohms to run a pair in parallel at 2 ohms. There are no jumpers to wire and no coil math. Turn the amplifier off before you change it. Power handling is the same 350 watts RMS and 1050 watts peak in either setting.
One woofer: 2 ohm setting on a 2 ohm stable mono amp, or 4 ohms if the amp is not 2 ohm stable.
Two woofers: both at 4 ohms, paralleled, for a 2 ohm load. Both at 2 ohms in parallel give 1 ohm.
The cone is JBL's own aluminum design, made to hold its shape at full excursion so the woofer stays clean when pushed. It rides on a rubber surround in a steel basket with a vented motor that keeps the 2 inch voice coil cool at high output. Cutout is 9 inches, overall diameter 10-1/2 inches, and the flange sits 21/32 of an inch above the mounting surface. No grille is included.
| Box | Net volume | Detail |
|---|---|---|
| Sealed | 0.53 cu ft (15 L) | Workable range 0.42 to 0.69 cu ft |
| Ported | 0.53 cu ft (15 L) | One 2.76" (70 mm) round port, 9.84" (250 mm) long, tuned to 43.4 Hz |
| Free-air | Infinite baffle | Power handling drops by half, to 175W RMS |
With a Qts of 1.22 at 2 ohms and 1.10 at 4 ohms, this is a high-Q woofer built for small spaces. In JBL's 0.53 cubic foot sealed box the standard formula puts system Q near 1.8 to 1.9 and resonance around 57 to 58 Hz, so expect punchy, full upper bass rather than deep, flat extension. The 4 ohm setting has the lower Qts and is the slightly tighter choice sealed. For more low end in the same space, JBL's ported box tuned to 43.4 Hz digs deeper.
We build Proline X cabinets for this driver in Tullahoma, Tennessee, cut direct fit to its 9 inch cutout and 3-1/4 inch depth, all at 0.60 cubic feet net per driver:
All four are listed in the Enclosures tab on this page. Other shallow 10s we stock: the Rockford Fosgate Punch P3S 10, the Rockford Fosgate Power T1 Slim 10 and the JL Audio 10TW3-D4.
Call 931-563-5151 and talk to someone who installs these. We will help you pick the setting and the box for your vehicle.
| JBL Club 102SL Specifications | |
|---|---|
| Power and Configuration | |
| Model | Club 102SL (JBLSUBCB102SL) |
| RMS Power Handling | 350 Watts |
| Peak Power Handling | 1050 Watts |
| Free-Air Power Handling | 175 Watts RMS |
| Impedance | 2 or 4 Ohm, SSI switch-selectable |
| Voice Coil Diameter | 2 in (50 mm) |
| Sensitivity (1W/1m) | 81 dB |
| Frequency Response (-6 dB) | 35 to 500 Hz |
| Thiele-Small Parameters, 2 Ohm / 4 Ohm (JBL) | |
| Fs | 36.2 Hz / 35 Hz |
| Qts | 1.218 / 1.097 |
| Qes | 1.401 / 1.329 |
| Qms | 9.325 / 6.263 |
| Vas | 23.49 L / 24.38 L (0.83 / 0.86 cu ft) |
| Re | 2.41 ohm / 4.52 ohm |
| Le | 0.818 mH / 0.827 mH |
| BL | 7.383 T-m / 10.37 T-m |
| Mms | 138 g / 144 g |
| Sd | 346.36 cm2 |
| Xmax | 6 mm |
| Enclosure (JBL) | |
| Sealed, Net | 0.53 cu ft (range 0.42 to 0.69) |
| Ported, Net | 0.53 cu ft, 2.76 x 9.84 in port, 43.4 Hz |
| Also Suits | Free-air and bandpass |
| Fitment and Physical | |
| Mounting Depth | 3-1/4 in (82.5 mm) |
| Cutout Diameter | 9 in (228.6 mm) |
| Overall Diameter | 10-1/2 in (267.3 mm) |
| Mounting Height | 21/32 in (16.5 mm) |
| Cone / Surround / Basket | Aluminum / Rubber / Steel |
| Grille | Not included |
No video available for this product yet.
Check back soon, or reach out and we'll walk you through it: 931-563-5151