Arc Audio Speakers
Upgrading your vehicle's low-end response shouldn't mean sacrificing your entire trunk. Arc Audio 10-inch subwoofers are purpose-built to deliver "big box" performance from compact enclosures. By utilizing advanced materials like fiber-reinforced pulp cones and compound-curve stamped steel baskets, Arc Audio eliminates the mechanical noise and flex that plagues lesser subwoofers, ensuring that every watt of power translates into clean, musical bass.
Choosing the Right 10-Inch Driver
The **X2V2 10"** is the "Reference" standard, designed for listeners who prioritize tonal accuracy and speed. It thrives in small sealed enclosures (0.65 cu. ft.), making it perfect for blending seamlessly with high-end component speakers. If your installation requires raw output or you prefer a ported enclosure, the **ARC Series 10"** offers a higher-excursion motor structure capable of delivering 250W RMS with greater authority. For trucks and vehicles with zero depth, the **A10** is the ultimate problem solver, requiring less than 4 inches of mounting depth while still delivering the impact of a full-size woofer.
Technical Features
Arc Audio sets its 10-inch drivers apart with **High-Temperature Black Anodized Voice Coils**. This coating significantly improves thermal dissipation, allowing the subwoofers to play louder for longer without suffering from "power compression" (loss of volume due to heat). The **X2V2** specifically features a copper-coated aluminum voice coil on a Kapton former, a lightweight combination that improves transient response—meaning the bass starts and stops instantly, eliminating "muddy" or "boomy" overhang.
Installation Advice
Volume matters. For the **X2V2 10"**, strictly adhere to the recommended 0.65 cu. ft. sealed volume; going too large can reduce its mechanical power handling. The **A10 Shallow** requires careful attention to clearance—ensure there is at least 1 inch of space in front of the woofer face so the high-roll surround doesn't strike the floor or seat bottom during heavy bass hits. If using the **ARC Series 10"**, consider a vented enclosure tuned to 32-35Hz for a substantial gain in low-frequency output.
