Proline X Enclosure X Series Fits Kicker Solo X 8-inch Subwoofer Dual - Proline X Subwoofer Enclosures for car audio systems

Proline X

Proline X Enclosure | X Series | Fits Kicker Solo X 8" Subwoofer | Dual

Q: What makes this Professional rather than Performance Optimized?

The box. A Performance Optimized cabinet is cut to fit a trunk shape on a 1.5 inch double baffle; this one is a full-size front-firing box on a 2.25 inch triple baffle with the woofer flush-mounted in the outer layer, Kicker logo acrylic, and a port checked at 1200 W rather than the rating. It carries a 2 year warranty against 1.

Q: Threaded inserts or a kit?

Threaded insert kit included for customer installation: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, allen key and gasket tape. One kit serves one woofer; a dual cabinet ships two.

Q: Do I need a subsonic filter?

Yes, at 30 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the Kicker Solo-Baric L7X 8 at 44 percent of its usable travel at 1200 W.

Q: Would a sealed box be better for me?

Not one we can show you. We do not build a sealed enclosure for the Kicker Solo-Baric L7X 8 and Kicker publish no sealed volume for it, so the Performance Graphs tab carries no ported-versus-sealed chart: the only sealed box left to plot would be this cabinet stuffed and sealed, which nobody would build, and a comparison against it would tell you nothing you could buy. What a vented box gives up is the region below tuning, where the cone unloads and the 30 Hz subsonic filter takes over; around 38.0 Hz the vent carries the load and cone travel drops to its minimum, which no sealed alignment can do.

Q: How does the front port work?

It is a vertical slot beside the woofer, 36.0 square inches, tuned to 38.0 Hz. The port stays under the chuff threshold up to 350 W; above that the air at the mouth moves faster than the 17 metres per second where a slot starts to chuff.

Q: How heavy is it and how does it ship?

70 lb, 34.00" W x 12.00" H x 18.25" D external. It ships as a UPS parcel; the price includes shipping in the 48 states. Do not add polyfill; it ships dry on purpose.

Q: Is the Solo-Baric L7X 8 included?

No. This is an enclosure only, cut for the Kicker Solo-Baric L7X 8 specifically: the 7.312 inch cutout and the 7.938 inch mounting depth allowance come from Kicker's published parameters. The baffle cutout is machined to the L7X square frame and is not cross-compatible with round drivers. Bring your own driver.

SKU: Pro8D-P KIK HEX

QUICK SPECS

Alignment: 1.75 cu ft net vented at 38.0 Hz
Driver: Kicker Solo-Baric L7X 8 D2, 800 W RMS, 24.0 mm Xmax, 47.95 Hz Fs
Build: Front-firing standard box, triple 2.25" baffle with the woofer flush-mounted in the outer layer, Kicker logo acrylic, dado joinery, 36.0 sq in slot port beside the woofer, internally braced
Cabinet: 34.00" W x 12.00" H x 18.25" D, 70 lb

Shipping Included No freight charges at checkout on US orders. International orders are quoted live carrier rates at checkout.

Built in Tennessee CNC cut from 3/4" Langboard Elite MDF. V-groove and dado joinery.

Advanced Terminal Cup Built in-house. ABS/Carbon Fiber. Stainless steel hardware. Copper ring terminals.

$ 496.99

Front Acrylic Insert Options:

In Stock and Ready to Ship

Financing available. Choose Shop Pay Installments at checkout.

Complete Your System

Image Dynamics Image Dynamics SQ1200.1D 1200W Mono Block Amplifier $ 504.99

Proline X Enclosure | X Series | Fits Kicker Solo X 8" Subwoofer | Dual

Enclosure Type Ported

External Dimensions 34.00" W x 12.00" H x 18.25" D

Gross Volume 3.01 cu ft

Net Volume 1.75 cu ft

Tuning Frequency 38.0 Hz

Port Area 36.0 Square Inches

Weight 70 lbs

INSTALLER'S TAKE

This is the dual version of the L7X 8 box: same per-driver airspace and port as the single, just two woofers and double the cabinet.

The port sees the same chuff limit as the single-eight box, clean up to 350 watts combined before the mouth starts moving faster than I want.

Wire the pair series-parallel off the two D2 coils; that is the standard way to combine two dual-coil drivers in one enclosure, and it keeps the load sane for most amplifiers. Set your subsonic filter at 30 Hz.

It ships dry. Do not add polyfill to a ported box.

Product Details

Proline X Enclosure | X Series | Fits Kicker Solo X 8" Subwoofer | Dual

Audio Intensity and Proline X are not affiliated with Kicker. This enclosure is built to the published parameters of the Kicker Solo-Baric L7X.

1.75 cu ft net Tuned 38.0 Hz Triple 2.25" baffle Cut for the Kicker Solo-Baric L7X 8 Built in Tennessee

Why this driver is vented at 38.0 Hz

Two Solo-Baric L7X 8 drivers share this cabinet's common airspace: 1.75 cubic feet net total, vented at 38.0 Hz through a 36.0 square inch slot. Doubling the driver count doubles the airspace and the port area together, so each L7X 8 still sees the same per-driver conditions as the single-eight box.

F3 lands at 31.5 Hz on this pair, close to the single-eight figure because the per-driver airspace is essentially unchanged. The port stays under the chuff threshold up to 350 W combined, above which the mouth velocity crosses Kicker's own reference. Ripple lands at 4.52 dB, over the ceiling we hold new designs to; this is the alignment Kicker publishes for the L7X and the box is built to it. Set the subsonic filter at 30 Hz and leave it there below tuning.

The cabinet

34.00" W x 12.00" H x 18.25" D external, internally braced. It ships as a UPS parcel; the price includes shipping in the 48 states.

This is our dual-eight envelope, sized for two L7X 8 drivers on one shared chamber. The baffle cutouts are machined to the L7X's square frame, which is not cross-compatible with round-frame drivers of the same nominal size. You source the driver. We handle the box.

The numbers to respect

Kicker's own Klippel rig measured the L7X 8 under SKU 49L7X82, the same parameters carried into both drivers in this dual cabinet; the Dual 2 Ohm coil is the one they publish, and the cabinet fits either the D1 or D2 version of the driver. Kicker publishes no outer frame dimension for the L7X, so the frame OD used here, 8.8125 inches, is estimated from the published cutout. Audio Intensity and Proline X are not affiliated with Kicker.

This cabinet is 1.75 cubic feet net, with a slot port of 36.0 square inches tuned to 38.0 Hz; the port stays under the chuff threshold up to 350 W; above that the air at the mouth moves faster than the 17 metres per second where a slot starts to chuff.

Anechoic ripple 4.52 dB over 4.5.

Set a 30 Hz subsonic filter, 24 dB per octave. Below tuning the vent stops loading the cone; with the filter in place the cone reaches 10.5 mm of its 24.0 mm at 1200 W.

Enclosure Specifications

Series	Proline X Professional
Driver-Specific Fitment	Kicker Solo-Baric L7X 8 D2 (Dual 2 Ohm)
Enclosure Type	Ported \| Front-Firing Standard Box
External Width	34.00 Inches
External Height	12.00 Inches
External Depth	18.25 Inches
Internal Volume (Net)	1.75 Cubic Feet
Port Type	Vertical Slot Beside The Woofer \| Front Exit \| Internally Braced
Port Area	36.0 Square Inches
Port Tuning (Fb)	38.0 Hz
Design Power Basis	1200 W RMS (1.5 x The Driver Rating)
Driver Fs	47.95 Hz
Driver Qts	0.651
Driver Qes / Qms	0.770 / 4.211
Driver Vas	4.134 Liters / 0.146 Cubic Feet
Driver Sd	249.6 Square Centimeters
Driver Mms	235.10 g
Driver BL	18.07
Driver Re	3.5 Ohm
Driver Xmax	24mm (One-Way)
Driver Power Handling	800 Watts RMS
Driver Overall Diameter	8.812 Inches (Kicker Spec)
Mounting Depth Required	7.938 Inches (Kicker Spec)
Cutout Diameter	7.312 Inches (Kicker Spec)
Flush Mount Recess	9.750 Inches In The Outer Layer
Voice Coil Configuration	Dual 2 Ohm
Material	Langboard Elite 3/4" MDF
Joinery	Dado Joinery (CNC-Cut), Flat Panels
Front Baffle Construction	Triple-Layer 2.25" MDF \| Woofer Flush-Mounted In The Outer Layer
Baffle Layers	3
Acrylic	Glossy Black Kicker Logo Insert, Outer Layer, Standard
Terminal Cup	Proline X ABS/Carbon Fiber Composite \| Back Panel, Terminal-Cup Side \| 12g OFC Pre-Wired
Damping	None - Ships Dry. Polyfill Detunes A Ported Enclosure
Carpet Finish	Plush Black
Weight	70 lb
Shipping	UPS Ground Parcel, Included In The 48 States
Bundle Options	Enclosure Only (Bring Your Own Kicker Solo-Baric L7X 8)
Warranty	2-Year Limited (Enclosure)
Manufactured	Tullahoma, Tennessee, USA

Performance Graphs

Net airspace

1.75

cu ft

Tuning

38.0

Hz · Fb

Half power

31.5

Hz · F3, anechoic

Xmax at

5943

W RMS · 30 Hz subsonic

With NO filter

2924

W RMS · unfiltered

Port

31.5

m/s at the mouth · 1200 W

01Is this driver right for a ported box?

Efficiency bandwidth product places the motor before anything else is decided.

EBP = Fs ÷ Qes = 62.3

Kicker Solo-Baric L7X 8 D2 · EBP 62.3

Between 50 and 100 a driver takes either load, and the choice becomes one of priorities rather than of physics. The Kicker Solo-Baric L7X 8 D2 reads 62.3. Ported buys output and low-end reach around tuning; sealed buys a shallower rolloff below it. This cabinet takes the first trade.

02What the box does to it

1.75 cu ft net against a 4.1 L Vas, vented at 38.0 Hz.

Fb = 38.0 Hz · F3 = 31.5 Hz · passband ripple 4.52 dB

Kicker Solo-Baric L7X 8 D2 · Fb 38.0 Hz, F3 31.5 Hz

Anechoic, before any cabin gain, with the 30 Hz subsonic filter already applied. The vent takes over below 38 Hz and the cone stops doing the work there, which is what holds travel down at the bottom of the passband.

03Ported vs Sealed

No sealed comparison is shown for this driver.

A ported-versus-sealed chart is only worth reading against a sealed box someone would actually build: the one we make for the driver, or the one its maker recommends. Neither exists for the Kicker Solo-Baric L7X 8 D2 — we do not build a sealed enclosure for it and Kicker publish no sealed volume for it — so rather than compare this cabinet against itself stuffed and sealed, a box no one would build, the comparison is left out.

04The watts that reach Xmax (in this enclosure)

Travel scales with the square root of power, so there is one wattage that puts the cone exactly on Kicker's published 24.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off.

P_Xmax = 5943 W with a 30 Hz subsonic · 2924 W with none → the filter is worth 2.0×

5943 W · subsonic at 30 Hz, 24 dB/oct2924 W · no subsonic filterXmax 24.0 mm one-way, published

Each trace touches the limit and no further, because each is drawn at the exact power that puts the cone on 24.0 mm. With a 30 Hz subsonic that takes 5943 W, reached first at 33 Hz. Take the filter away and the same cabinet reaches 24.0 mm on 2924 W — the filter is worth 2.0× the safe power. A vent unloads the cone below tuning, so there is nothing holding it once the box stops loading: on a sealed build a subsonic filter is an improvement, here it is required equipment. The unfiltered trace is still rising where this chart stops at 20 Hz, so treat 2924 W as a bound rather than a floor. Every wattage on this page is a MECHANICAL limit, not an electrical one. It is the power at which the cone runs out of linear travel in this cabinet, and nothing more. What the voice coil can dissipate as heat is a separate ceiling set by the driver, not by the box — Kicker rate this one at 800 W RMS, and that is the number that binds first here: heat stops you before travel does, so treat 800 W as the ceiling and the travel figures above as headroom. Final wired impedance, amplifier output and how long you hold the level are all electrical questions this graph does not answer.

Woofer Details

Kicker positions the 8 as the scaled down entry to a competition line rather than a competition driver in its own right, reproducing the character of the larger Solo X sizes on smaller hardware. It is the only size in the line with a smaller motor, and the only one whose recone needs glue rather than a field swap. Kicker publishes a recommended amplifier range for this line, not a driver power rating. This enclosure is cut for 7.9375 in of mounting depth and a 7.3125 in cutout, taken from Kicker's published figures rather than measured off a sample. Where a rating below carries no reference condition, that is because the maker does not state one, and it is left as they print it.

Driver	Kicker Solo-Baric L7X 8
Coil Options	Dual 1 Ohm or Dual 2 Ohm
Voice Coil Diameter	2.5 in, 1.875 in Winding Width
Coil Former	Aluminum
Cone	Double Pressed Pulp, Square With Ribbed Corners
Surround	UV Resistant Santoprene
Spider	Dual Spider Suspension
Lead Wires	Single 8 AWG Spring Loaded Terminals
Basket	Cast Aluminum
Motor	Triple Stacked Ferrite, 225 oz, Hyper Extended Pole Piece, Rubber Magnet Boot
Motor Diameter	6.9375 in
Cooling	Forced Air Cooling
Recommended Amplifier Power, RMS	400 to 800 W
Sensitivity	79.5 dB, Characteristic SPL at 1m for 1W at Re by Kicker
Mounting Depth	7.9375 in
Cutout Diameter	7.3125 in
Frame Outside Diameter	8.8125 in Square Across The Flats
Driver Displacement	0.17 cu ft
Driver Warranty	1 Year From Purchase, Authorized Kicker Dealer

Materials

Material

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Professional Series enclosure is CNC-cut from Langboard Elite MDF, 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure, because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications

Langboard Elite MDF: Published Mill Data

Property	Value	Why It Matters
Panel Stock	Langboard Elite MDF	Named, verifiable panel source, not generic "high-density MDF"
Thickness	3/4" (18mm)	Industry standard for subwoofer enclosures; panels below this flex under pressure
Density	48.5 lbs/ft³	Higher density = less porosity, better screw retention, reduced resonance
Internal Bond	200 psi	Measures resistance to delamination under sustained internal pressure. The most enclosure-relevant spec on this sheet
Modulus of Rupture (MOR)	4,200 psi	Bending strength before the panel breaks, relevant for larger unsupported baffle spans
Modulus of Elasticity (MOE)	410,000 psi	Stiffness under load; higher MOE means less panel flex under bass pressure, less resonance
Face Screw Holding	325 lbs	How firmly the panel surface holds a screw; critical for baffle joint integrity over time
Edge Screw Holding	250 lbs	Panel edge retention, relevant for every joint that isn't face-to-face

Internal Bond

200 psi: The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually. The symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE: Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness, its resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level, not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge: Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint, where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Professional Series enclosure is not going anywhere.

Sourcing

Named Panel Stock: Not "Premium MDF"

The phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification. It is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements, and in how the box holds up two years into daily use.

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.