Proline X Pro 18-P ZV618 Professional Series ported enclosure, front baffle with slot port and branded gloss black acrylic insert, 36 by 21 inches, 112.1 square inches of port area.
Proline X Pro 18-P ZV618 Professional Series ported enclosure, front baffle with slot port and branded gloss black acrylic insert, 36 by 21 inches, 112.1 square inches of port area.

Proline X

Professional Series Ported 18" Enclosure | Sundown Audio Z-Series ZV6 18" Z v.6

SKU: Pro 18-P ZV618

QUICK SPECS
  • Alignment: 5.66 cu ft net vented at 35.0 Hz. F3 28.9 Hz anechoic, 5.35 dB passband ripple
  • Driver: Sundown Audio Z-Series ZV6 18" Z v.6 D2, 3250 W RMS, 35.0 mm Xmax, 24.12 Hz Fs
  • Build: Front-firing standard box, 2.25" three-layer baffle with the woofer flush-mounted in the outer layer, Sundown Audio logo acrylic, dado joinery, 112.1 sq in front slot port beside the woofer with one bend along the back wall, port and excursion gated at 3250 W
  • Cabinet: 36.00" W x 21.00" H x 23.50" D, 107 lb, threaded insert kit included
Shipping Icon
Shipping Included No freight charges at checkout on US orders. International orders are quoted live carrier rates at checkout.
USA Flag Rounded
Built in Tennessee CNC cut from 3/4" Langboard Elite MDF. V-groove and dado joinery.
Tools icon: hands-on mobile audio expertise since 1985
Advanced Terminal Cup Built in-house. ABS/Carbon Fiber. Stainless steel hardware. Copper ring terminals.
$ 1,012.99
In Stock and Ready to Ship
Shop Pay Financing available. Choose Shop Pay Installments at checkout.
Proline X Pro 18-P ZV618 Professional Series ported enclosure, front baffle with slot port and branded gloss black acrylic insert, 36 by 21 inches, 112.1 square inches of port area.

Professional Series Ported 18" Enclosure | Sundown Audio Z-Series ZV6 18" Z v.6

Regular price $ 1,012.99
Sale price $ 1,012.99 Regular price
Unit price

More enclosures cut for Sundown Audio subwoofers: Sundown Audio Subwoofer Boxes

Enclosure Type Ported
External Dimensions 36.00" W x 21.00" H x 23.50" D
Gross Volume 7.75 cu ft
Net Volume 5.66 cu ft
Tuning Frequency 35.0 Hz
Port Area 112.1 Square Inches
Shipping Weight 116 lbs
INSTALLER'S TAKE

I built this box for the ZV6 18 because Sundown's Z-Series motor needed the full eighteen inch Professional envelope, and the D1 and D2 coils share the same basket, so one listing covers both.

The port stays clean past the coil's own rated power, but the mouth still runs within a meter of the 17 meter per second chuff line on either coil, and Sundown doesn't say whether the driver's 35 mm Xmax is one-way or peak to peak, so I'm not stretching the excursion headroom on the strength of that number alone.

Wire the D2 coil in series for a nominal 4 ohms, or parallel for 1 ohm. Wire the D1 coil in series for a nominal 2 ohms, or parallel for 0.5 ohms only on an amplifier built for that load.

Sundown Audio publishes no mounting hole locations for the Z-Series ZV6 18" Z v.6, so the inserts are not in the baffle when the box arrives. The insert kit is in the box: set the inserts where the woofer's own holes fall, with the drill bit and the 2.5 inch allen-head screws in the kit, and lay the gasket tape before the woofer goes down.

It ships dry. Do not add polyfill to a ported box. Set your subsonic filter at 30 Hz.

Product Details
Enclosure Specifications
Performance Graphs
Woofer Details
Materials
Product Details

Proline X Professional 18" Ported

A freight-class eighteen-inch box built to the ZV6 18's own numbers, shared across both coils

5.66 cu ft net Tuned 35.0 Hz F3 28.9 Hz 2.25" three-layer baffle Cut for the Z-Series ZV6 18" Z v.6 Built in Tennessee
5.66cu ft net
35.0Hz tuning
28.9Hz F3 anechoic
112.1sq in port area

Why this driver is vented at 35.0 Hz

The Sundown Audio Z-Series ZV6 18 inch Z v.6 D2 pairs a wide frame with a deep motor, and this cabinet gives it 5.662 cubic feet net, vented at 35.0 Hz through a 112.1 square inch port. F3 lands at 28.9 Hz with 5.35 dB of passband ripple. It is the largest net-volume single-driver box in the professional Sundown eighteen-inch line, sized for either the D1 or D2 coil, and it ships freight rather than parcel.

Threaded insert kit ships with this box. Sundown Audio does not publish the mounting hole locations for the Z-Series ZV6 18" Z v.6, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer.

The port on this box stays clean past the D2 coil's own 3250 W rated power, so the chuff threshold sits outside the coil's rated range even though the mouth runs close to it at full output. Ripple across the passband holds at 5.35 dB on the 5.662 cubic feet net this cabinet gives the driver. Sundown publish full Fs, Qts, Qes and Qms for the ZV6 18, and the D1 and D2 coils share the same basket and frame, so one cabinet covers both.

What makes it Professional

Three-layer baffle, flush mount

Three layers of 3/4 inch Langboard Elite make a 2.25 inch front. The outer layer is routed to the flange, so the woofer sits flush with the face; the two layers behind it carry the mounting hardware and the load.

Sundown Audio logo acrylic

A glossy black acrylic insert with the Sundown Audio mark sits in the outer layer beside the woofer. It is standard on every Professional cabinet.

Threaded insert kit ships with this box

Threaded insert kit included, inserts NOT pre-installed: the manufacturer publishes no mounting hole locations, so the kit ships with the box for installation when the woofer goes in: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, allen key and gasket tape.

Port gated at 3250 W

The 112.1 square inch slot beside the woofer is sized so the channel runs 20.6 meters per second and the mouth 16.7 meters per second at the driver's rated power, under the 17 meters per second where a slot starts to chuff. The channel runs 14.00 inches along its wall and turns once along the back wall for another 6.08 inches, which is why a 35.0 Hz tuning fits a 23.50 inch deep box.

Why this is a Professional build

Every driver is run through the Performance Optimized wedge and down-fire before this chassis; the Professional box is where a driver lands when that smaller envelope, 30 inches wide and 18 inches deep with a triangular side port, cannot give it what it needs at its rated power. The Z-Series ZV6 18" Z v.6 does not fit that envelope at all: no rule: 18. This box is the chassis with the width, depth and port to carry it.

What the price covers

Every Professional cabinet is priced the same way, by its size: this one is 10.28 cubic feet outside. At 107 lb it ships freight, quoted at checkout.

What Sundown Audio recommend

Sundown Audio publish a vented box for the Z-Series ZV6 18" Z v.6 at 7.00 cubic feet on a basis they do not state, tuned to 32.0 Hz. This cabinet holds 5.66 cubic feet net and tunes to 35.0 Hz. They call for a port area of 100 sq in. This chassis is smaller and tuned higher than they ask, so it gives up some depth for a port that stays clean at the design power.

The cabinet

36.00" W x 21.00" H x 23.50" D external. Two windowed braces run front to back either side of the woofer, clearing the cutout by two and a half inches. The box ships dry: polyfill detunes a ported alignment. Inside the 36 by 21 Professional envelope for a single 18, sized to the ZV6 18's shared basket across both coils and its freight-class weight. At this size it ships freight; the rate is calculated at checkout.

This cabinet ships freight rather than parcel: at 107.2 lb and 125 inches of length plus girth it clears UPS Ground's parcel limits, so plan for freight delivery and dock or liftgate access. Sundown doesn't state whether the ZV6 18's printed 35 mm of Xmax is one-way or peak to peak, so the excursion headroom behind this build carries real uncertainty. At the mouth, air moves 16.7 m/s on the D2 coil and 16.5 m/s on the D1 coil at their rated power, both within 1 m/s of the 17 m/s point where a slot port starts to chuff, so this box runs closer to that line than most in the line, on either coil. Sundown Audio does not publish the mounting hole locations for the Z-Series ZV6 18" Z v.6, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer.

The numbers to respect

Set a 28 Hz subsonic filter, 24 dB per octave. Below tuning the vent stops loading the cone; with the filter in place the cone reaches 11.0 mm of its 35.0 mm at 3250 W.

Enclosure Specifications
SeriesProline X Professional
Driver-Specific FitmentSundown Audio Z-Series ZV6 18" Z v.6 D2 (D2)
Enclosure TypePorted | Front-Firing Standard Box
External Width36.00 Inches
External Height21.00 Inches
External Depth23.50 Inches
Internal Volume (Gross)7.98 Cubic Feet
Internal Volume (Net After Displacement)5.66 Cubic Feet
Port TypeVertical Slot Beside The Woofer | Front Exit | One 90 Degree Bend Along The Back Wall
Port Geometry5.75 x 19.50 Inches, 112.1 Square Inches, 29.58 Inches Of Path
Port Area112.1 Square Inches
Port Tuning (Fb)35.0 Hz
Port Mouth1/2 In Roundover On All Four Edges, 138.4 Square Inches At The Face
Port Air Velocity20.6 m/s In The Channel, 16.7 m/s At The Mouth, At 3250 W (17.0 m/s Chuff Threshold)
Design Power Basis3250 W RMS (1.2 x The Driver Rating) For Port Velocity And Excursion
Predicted F328.9 Hz (Anechoic)
Passband Ripple5.35 dB (Anechoic)
Subsonic Filter28 Hz High-Pass, 24 dB/Octave - REQUIRED On A Vented Enclosure
Driver Fs24.12 Hz
Driver Qts0.397
Driver Qes / Qms0.426 / 5.736
Driver Vas116.390 Liters / 4.110 Cubic Feet
Driver Sd1248.8 Square Centimeters
Driver Mms690.56 g
Driver BL31.28
Driver Re4.0 Ohm
Driver Xmax35mm (One-Way)
Driver Displacement0.27 Cubic Feet (Published by Sundown Audio)
Driver Sensitivity87.6 dB
Driver Power Handling3250 Watts RMS
Driver Overall Diameter18.500 Inches (Sundown Audio Spec)
Mounting Depth Required14.920 Inches (Sundown Audio Spec)
Cutout Diameter16.680 Inches (Sundown Audio Spec)
Flush Mount Recess19.500 Inches In The Outer Layer
MaterialLangboard Elite 3/4" MDF
ConstructionShopSabre CNC / Two Windowed Braces Front To Back Either Side Of The Woofer
JoineryDado Joinery (CNC-Cut), Flat Panels
Front Baffle ConstructionThree 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer
Baffle Layers3
AcrylicGlossy Black Sundown Audio Logo Insert, Outer Layer, Standard
Mounting HardwareThreaded Insert Kit Included: 8-12 Inserts, Drill Bit, 2.5 In Allen-Head Screws, Allen Key, Gasket Tape
Voice Coil ConfigurationD2
Terminal CupProline X ABS/Carbon Fiber Composite | Back Panel, Terminal-Cup Side | 12g OFC Pre-Wired
DampingNone - Ships Dry. Polyfill Detunes A Ported Enclosure
Recommended Power2275-3250 Watts RMS (Sundown Audio Rated: 3250W RMS)
Carpet FinishPlush Black
Shipping Weight116 lb
ShippingFreight, Rated At Checkout
Bundle OptionsEnclosure Only (Bring Your Own Sundown Audio Z-Series ZV6 18" Z v.6)
Warranty2-Year Limited (Enclosure)
ManufacturedTullahoma, Tennessee, USA
Performance Graphs
Net airspace
5.66
cu ft
Tuning
35.0
Hz · Fb
Half power
28.9
Hz · F3, anechoic
Xmax at
32579
W RMS · 28 Hz subsonic
With NO filter
5703
W RMS · unfiltered
Port
16.7
m/s at the mouth · 3250 W

01Is this driver right for a ported box?

Efficiency bandwidth product places the motor before anything else is decided.

EBP = Fs ÷ Qes = 56.6
SEALED 0–50 TRANSITION 50–100 PORTED 100–150 0 50 100 150 EBP 56.6
Sundown Audio Z-Series ZV6 18" Z v.6 D2 · EBP 56.6
Between 50 and 100 a driver takes either load, and the choice becomes one of priorities rather than of physics. The Sundown Audio Z-Series ZV6 18" Z v.6 D2 reads 56.6. Ported buys output and low-end reach around tuning; sealed buys a shallower rolloff below it. This cabinet takes the first trade.

02What the box does to it

5.66 cu ft net against a 116.4 L Vas, vented at 35.0 Hz.

Fb = 35.0 Hz  ·  F3 = 28.9 Hz  ·  passband ripple 5.35 dB
20 30 50 70 100 150 200 +8 +4 0 −4 −8 −12 −16 −20 −24 −28 −32 FREQUENCY · Hz LEVEL · dB −3 dB Fb 35.0
Sundown Audio Z-Series ZV6 18" Z v.6 D2 · Fb 35.0 Hz, F3 28.9 Hz
Anechoic, before any cabin gain, with the 28 Hz subsonic filter already applied. The vent takes over below 35 Hz and the cone stops doing the work there, which is what holds travel down at the bottom of the passband.

03Ported vs Sealed

No sealed comparison is shown for this driver.

A ported-versus-sealed chart is only worth reading against a sealed box someone would actually build: the one we make for the driver, or the one its maker recommends. Neither exists for the Sundown Audio Z-Series ZV6 18" Z v.6 D2 — we do not build a sealed enclosure for it and Sundown publish no sealed volume for it — so rather than compare this cabinet against itself stuffed and sealed, a box no one would build, the comparison is left out.

04The watts that reach Xmax (in this enclosure)

Travel scales with the square root of power, so there is one wattage that puts the cone exactly on Sundown's published 35.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off.

PXmax = 32579 W with a 28 Hz subsonic  ·  5703 W with none  →  the filter is worth 5.7×
20 30 50 70 100 150 200 0 8 16 24 32 40 FREQUENCY · Hz CONE TRAVEL · mm PAST LINEAR TRAVEL · Xmax 35.0 mm 32579 W reaches Xmax here
32579 W · subsonic at 28 Hz, 24 dB/oct5703 W · no subsonic filterXmax 35.0 mm one-way, published
Each trace touches the limit and no further, because each is drawn at the exact power that puts the cone on 35.0 mm. With a 28 Hz subsonic that takes 32579 W, reached first at 27 Hz. Take the filter away and the same cabinet reaches 35.0 mm on 5703 W — the filter is worth 5.7× the safe power. A vent unloads the cone below tuning, so there is nothing holding it once the box stops loading: on a sealed build a subsonic filter is an improvement, here it is required equipment. The unfiltered trace is still rising where this chart stops at 20 Hz, so treat 5703 W as a bound rather than a floor. Every wattage on this page is a MECHANICAL limit, not an electrical one. It is the power at which the cone runs out of linear travel in this cabinet, and nothing more. What the voice coil can dissipate as heat is a separate ceiling set by the driver, not by the box — Sundown rate this one at 3250 W RMS, and that is the number that binds first here: heat stops you before travel does, so treat 3250 W as the ceiling and the travel figures above as headroom. Final wired impedance, amplifier output and how long you hold the level are all electrical questions this graph does not answer.
Woofer Details
The Z v.6 replaces the Z v.5 and sits a step above the X v.3 on Sundown's excursion ladder. The change that defines it is the coil, from four layers to eight, which Sundown says was done for more motor force. They do not recommend it sealed. This enclosure is cut for 14.92 in of mounting depth and a 16.68 in cutout, taken from Sundown Audio's published figures rather than measured off a sample. Where a rating below carries no reference condition, that is because the maker does not state one, and it is left as they print it.
DriverSundown Audio Z-Series ZV6 18" Z v.6
Coil OptionsDual 1 Ohm or Dual 2 Ohm
Voice Coil Diameter3 in, 8 layer flat wire aluminum
Coil FormerAluminum
SurroundMega Roll v.2
SpiderCustom Tooled Ultra Linear Spider Packs
Lead WiresStitched On XL Tinsel
BasketCustom Tooled Mega Platform, US Patents D691596, D691597, D691598 and D741841
MotorQuad Stacked, 240 mm Motor Structure, 100 mm Total Stack Height, Hyper Extended Pole, Large Aluminum Faraday Ring
CoolingHigh Velocity Pole Vent, Heavily Vented Magnetic Gap, Machined Channels In Four Places Around The Pole Piece, Cast Aluminum Vented Frame Spacer Ring
Power, RMS3250 W
Peak Power6500 W
Sensitivity87.58 dB, Sensitivity, reference condition not stated by Sundown
Mounting Depth14.92 in
Cutout Diameter16.68 in
Frame Outside Diameter18.50 in
Driver Displacement0.27 cu ft
Driver Warranty2 Year Limited, Authorized Dealer Purchase, Original Owner
Materials
Material

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Professional Series enclosure is CNC-cut from Langboard Elite MDF, 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure, because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications

Langboard Elite MDF: Published Mill Data

Property Value Why It Matters
Panel Stock Langboard Elite MDF Named, verifiable panel source, not generic "high-density MDF"
Thickness 3/4" (18mm) Industry standard for subwoofer enclosures; panels below this flex under pressure
Density 48.5 lbs/ft³ Higher density = less porosity, better screw retention, reduced resonance
Internal Bond 200 psi Measures resistance to delamination under sustained internal pressure. The most enclosure-relevant spec on this sheet
Modulus of Rupture (MOR) 4,200 psi Bending strength before the panel breaks, relevant for larger unsupported baffle spans
Modulus of Elasticity (MOE) 410,000 psi Stiffness under load; higher MOE means less panel flex under bass pressure, less resonance
Face Screw Holding 325 lbs How firmly the panel surface holds a screw; critical for baffle joint integrity over time
Edge Screw Holding 250 lbs Panel edge retention, relevant for every joint that isn't face-to-face
Internal Bond

200 psi: The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually. The symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE: Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness, its resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level, not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge: Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint, where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Professional Series enclosure is not going anywhere.

Sourcing

Named Panel Stock: Not "Premium MDF"

The phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification. It is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements, and in how the box holds up two years into daily use.

CNC-Cut to Spec

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.

Handcrafted in USA

Handcrafted in USA

Hand-assembled at our facility in Tullahoma, TN. Every enclosure is inspected before it ships.

Tuned to the Build

Tuned to the Build

Internal volume and port geometry are calculated to spec and CNC-cut to exact dimensions. The box performs the same way every time.

Frequently Asked Questions

Why is this enclosure tuned to 35.0 Hz?

Why is this a Professional build and not a Performance Optimized box?

Threaded inserts or a kit?

Do I need a subsonic filter?

Would a sealed box be better for me?

How does the front port work?

What does the price cover, and how does it ship?

Is the Z-Series ZV6 18" Z v.6 included?

Related Articles

Carpet-wrapped subwoofer enclosure mounted in a blow through opening cut through a pickup truck rear cab wall

Blow Through Sub Box Design: Cutting, Sealing and Truck F...

A blow through sub box fires into the cab through an opening cut in the rear cab wall, so the enc...

Read Article →
Black carpet-wrapped behind-seat subwoofer box fitted against a crew cab rear wall, tape measure showing depth

Subwoofer Box for Truck: Which Fits Your Cab? (2026)

Cab type decides which subwoofer box fits your truck, so here's where a box can go in single, ext...

Read Article →
Two black carpeted subwoofer enclosures on a workshop bench: a wedge box with its driver on a flat vertical baffle and its rear panel sloped, beside an angled-baffle box with the driver face tipped back.

Wedge vs Angled-Baffle Subwoofer Box: Which Panel Is Tape...

A wedge tapers the rear panel and keeps the driver vertical. An angled-baffle box tips the driver...

Read Article →
Low angle close-up of automotive trunk carpet pile with a defined band of shadow across it.

Down-Fire Box Clearance: How Much Floor Gap You Need, and...

The gap under a down-firing box is not spare room. It is the air path. Every bit of output the dr...

Read Article →
1 2 3 … 8 Next »