Affordable Component Subwoofers for Your Car
Car audio enthusiasts know the importance of a good subwoofer in achieving the ultimate sound exp...
Read Article →Divini
SKU: DCAK4ANL
Divini Sound Solutions Amplifier Kit
A complete 4 gauge install for a single amplifier: power, ground, signal, remote and speaker wire, all 100% oxygen-free copper, with a 150A ANL fuse to protect the run.
Many budget amp kits use copper clad aluminum (CCA), which is aluminum wire with a thin copper coating. Aluminum has noticeably higher resistance than copper, so a CCA cable of the same gauge drops more voltage and runs hotter at the same current. Every conductor in this Divini kit is 100% oxygen-free copper, so the gauge on the label carries the current that gauge is supposed to carry, and your amplifier sees the voltage it was designed for.
Best fit: Most single amplifiers up to about 1,000 watts RMS, such as a monoblock for one or two subwoofers or a four channel for a full system.
Rule of thumb: 8 gauge for amplifiers up to about 500 watts RMS, 4 gauge up to about 1,000 watts RMS, and 1/0 gauge above that. Long runs or big current draws push you up a size.
If your amplifier's own fuses add up to more than this kit's 150A ANL fuse, step up to a heavier kit. The other Divini kits are the DCAK0-ANL, DCAK8-ANL and DCAK0-2AMP, and every one is on our Divini page. Still choosing the amplifier? Start with our car amplifiers.
Mount the fuse holder within 18 inches of the battery positive terminal, so the full length of the power wire is protected. Run the power wire away from the RCA cables, ideally down the opposite side of the vehicle, to keep alternator noise out of the signal. Keep the ground short and bolt it to clean, bare chassis metal; the 3 foot ground cable in this kit is sized for exactly that.
Audio Intensity is an authorized Divini dealer. Call 931-563-5151 and we will help you size the kit, the fuse and the ground for your amplifier and vehicle.
| Divini DCAK4-ANL Specifications | |
|---|---|
| Kit Details | |
| Model | DCAK4-ANL |
| Brand | Divini Sound Solutions by DB Drive |
| Power / Ground Gauge | 4 gauge |
| Conductor | 100% OFC copper, twisted pair |
| Main Fuse | 150A ANL fuse |
| Includes | 17 ft (5 m) 4 gauge red soft touch 100% OFC copper power wire |
| Includes | 3 ft (0.9 m) 4 gauge black soft touch 100% OFC copper ground cable |
| Includes | 17 ft (5 m) gray and white shielded 100% OFC copper RCA cables |
| Includes | 17 ft (5 m) 16 gauge gray and white 100% OFC copper speaker wire |
| Includes | 17 ft (5 m) 18 gauge white matte with gray stripe 100% OFC copper remote wire |
| Includes | Heat resistant ANL fuse holder with a 150A ANL fuse |
| Includes | Wire ties, ring terminals and wire loom |
| UPC | 811536039651 |
| Master Carton | 4 |
No video available for this product yet.
Check back soon, or reach out and we'll walk you through it: 931-563-5151