Worst Subwoofer Brands to Avoid in 2026: Expert Guide
The worst subwoofer brands to avoid in 2026, why they fail (peak-watt inflation, weak voice coil...
Read Article →
Divini
Divini DCAK0-ANL 0 Gauge OFC Amp Kit | 100% Copper Amplifier Wiring Kit
SKU: DCAK0ANL
$ 199.99
QUICK SPECS
- Kit: Divini DCAK0-ANL | 1/0 gauge | 100% OFC copper
- Wire: 17 ft 1/0 GA power | 3 ft 1/0 GA ground | 17 ft remote
- Protection: 250A ANL fuse
- Best for: High-power single amplifiers, roughly 1,000 watts RMS and up, where 4 gauge would be undersized.
Divini DCAK0-ANL 0 Gauge OFC Amp Kit | 100% Copper Amplifier Wiring Kit
Regular price
$ 199.99
Sale price
$ 199.99
Regular price
Unit price
INSTALLER'S TAKE
Product Details
Specifications
Related Kits
FAQs
Related Video
Divini Sound Solutions Amplifier Kit
Divini DCAK0-ANL 1/0 Gauge Amplifier Kit
A 1/0 gauge power kit for high-current amplifiers: power, ground and remote wire in 100% oxygen-free copper, with a 250A ANL fuse. Signal and speaker wire are not included, so pair it with your own RCAs and speaker runs.
100% OFC copper
Twisted pair conductor
250A ANL fuse holder
Soft touch wire
What's in the Kit
- 17 ft (5 m) 1/0 gauge red soft touch 100% OFC copper power wire
- 3 ft (0.9 m) 1/0 gauge black soft touch 100% OFC copper ground cable
- 17 ft (5 m) 18 gauge white matte with gray stripe 100% OFC copper remote wire
- Heat resistant ANL fuse holder with a 250A ANL fuse
- Wire ties, ring terminals and wire loom
Why 100% OFC Copper Matters
Many budget amp kits use copper clad aluminum (CCA), which is aluminum wire with a thin copper coating. Aluminum has noticeably higher resistance than copper, so a CCA cable of the same gauge drops more voltage and runs hotter at the same current. Every conductor in this Divini kit is 100% oxygen-free copper, so the gauge on the label carries the current that gauge is supposed to carry, and your amplifier sees the voltage it was designed for.
Is This the Right Kit for Your Amplifier?
Best fit: High-power single amplifiers, roughly 1,000 watts RMS and up, where 4 gauge would be undersized.
Rule of thumb: 8 gauge for amplifiers up to about 500 watts RMS, 4 gauge up to about 1,000 watts RMS, and 1/0 gauge above that. Long runs or big current draws push you up a size.
If your amplifier's own fuses add up to more than this kit's 250A ANL fuse, step up to a heavier kit. The other Divini kits are the DCAK4-ANL, DCAK8-ANL and DCAK0-2AMP, and every one is on our Divini page. Still choosing the amplifier? Start with our car amplifiers.
Install Notes
Mount the fuse holder within 18 inches of the battery positive terminal, so the full length of the power wire is protected. Run the power wire away from the RCA cables, ideally down the opposite side of the vehicle, to keep alternator noise out of the signal. Keep the ground short and bolt it to clean, bare chassis metal; the 3 foot ground cable in this kit is sized for exactly that.
Questions About Wiring Your System?
Audio Intensity is an authorized Divini dealer. Call 931-563-5151 and we will help you size the kit, the fuse and the ground for your amplifier and vehicle.
| Divini DCAK0-ANL Specifications | |
|---|---|
| Kit Details | |
| Model | DCAK0-ANL |
| Brand | Divini Sound Solutions by DB Drive |
| Power / Ground Gauge | 1/0 gauge |
| Conductor | 100% OFC copper, twisted pair |
| Main Fuse | 250A ANL fuse |
| Includes | 17 ft (5 m) 1/0 gauge red soft touch 100% OFC copper power wire |
| Includes | 3 ft (0.9 m) 1/0 gauge black soft touch 100% OFC copper ground cable |
| Includes | 17 ft (5 m) 18 gauge white matte with gray stripe 100% OFC copper remote wire |
| Includes | Heat resistant ANL fuse holder with a 250A ANL fuse |
| Includes | Wire ties, ring terminals and wire loom |
| UPC | 811536039644 |
| Master Carton | 4 |
No video available for this product yet.
Check back soon, or reach out and we'll walk you through it: 931-563-5151
