Enhance Your Sound System with a Flat Subwoofer
Upgrade your sound system with a flat subwoofer for deeper, bass-enhanced audio quality. Choose f...
Read Article →
Rockford Fosgate
Rockford Fosgate Power T1 Slim 10 | T1S2-10S 10 inch Shallow Sealed Subwoofer | 2 Ohm
SKU: T1S2-10S
$ 539.99
QUICK SPECS
- Power: 500W RMS | 1000W Peak | Single 2 Ohm voice coil
- Fitment: 3.01 in mounting depth | 9.13 in cutout | 0.028 cu ft displacement
- Box: Sealed only, Rockford recommends 0.5 to 0.75 cu ft | Qtc 1.0 at 0.75 cu ft
- T/S: Fs 36 Hz | Qts 0.76 | Vas 15.4 L | Xmax 15 mm | 82 dB 1W/1m
Rockford Fosgate Power T1 Slim 10 | T1S2-10S 10 inch Shallow Sealed Subwoofer | 2 Ohm
Regular price
$ 539.99
Sale price
$ 539.99
Regular price
Unit price
INSTALLER'S TAKE
Product Details
Specifications
Enclosures
FAQs
Related Video
Rockford Fosgate Power T1 Slim, Gen-2 Sealed Version
Rockford Fosgate Power T1 Slim 10 Inch Subwoofer (T1S2-10S)
500 watts RMS and 15 mm of Xmax from 3.01 inches of mounting depth. The T1S2-10S is the sealed-enclosure version of Rockford Fosgate's re-engineered T1 Slim, with a single 2 ohm voice coil, tuned for small sealed boxes and closed spaces like a truck cab.
500W RMS
3.01 in Depth
15 mm Xmax
2 Ohm SVC, Sealed
Power-Series Output in a Slim Basket
Most shallow 10s trade excursion for depth. The T1 Slim keeps 15 mm of one-way Xmax in a 3.01 inch mounting depth, using Rockford's SYMS motor layout and a high-temperature neodymium magnet to pull the motor up around the voice coil instead of hanging it behind the basket. The cutout is 9.13 inches and the driver displaces only 0.028 cubic feet.
This Gen-2 version was re-engineered with more moving mass so it works in smaller enclosures. The dual-wound 2.5 inch voice coil is pure copper on a composite former, with an aluminum spider spacer, a multi-vent pole piece and Rockford's IDHS heat sink all working to move heat away from the coil. The cone is a carbon fiber, PMI and glass fiber composite with an aluminum dust cap, the NCDI polymer surround is chemically bonded to it so it will not dry-rot, and two progressive Nomex spiders keep it centered.
S Means Sealed
Rockford builds the T1 Slim 10 in two versions. The S models, like this T1S2-10S, are made for sealed enclosures, and Rockford lists vented boxes as not recommended for them. The P models are the ported versions. Buy the S if your box is sealed.
The T1S2-10S has a single 2 ohm voice coil, so there is no series or parallel choice at the driver. One woofer presents 2 ohms to your amplifier. Two wired in parallel present 1 ohm, and two in series present 4 ohms.
Sealed Enclosure Performance: Pre-Calculated Results
Rockford Fosgate recommends 0.5 to 0.75 cubic feet sealed. These are the results we calculate from Rockford's own published parameters, as system Q (Qtc) and anechoic F3, before cabin gain. Volumes are net, after the driver's displacement.
| Net volume | Qtc | F3 | Note |
|---|---|---|---|
| 0.50 cu ft | 1.10 | 39 Hz | Bottom of Rockford's sealed range |
| 0.60 cu ft | 1.05 | 38 Hz | |
| 0.75 cu ft | 1.00 | 37 Hz | Top of Rockford's sealed range |
| 0.99 cu ft | 0.95 | 36 Hz | Our down fire sealed T1 Slim cabinet |
At the small end of Rockford's range the T1 Slim runs a full, punchy Qtc 1.1. Toward 0.75 cubic feet it settles to 1.0, and a little more air brings it just under 1.0 with an F3 in the mid 30s, which is deep for a woofer this thin before any cabin gain.
Enclosure We Cut for the T1 Slim 10
Our down fire sealed T1 Slim 10 inch enclosure is 7 inches tall with a 9.13 inch direct-fit cutout, the same cutout the T1S2-10S uses, and 0.99 cubic feet net. With this driver it lands at Qtc 0.95. It is built in Tullahoma, Tennessee, and is listed in the Enclosures tab on this page.
Need the dual-voice-coil option or a lower price point? See the Punch P3S 10, or everything we carry from Rockford on our Rockford Fosgate page.
Questions About Fitment or Wiring?
Call 931-563-5151 and talk to someone who installs these. We will help you pick the load and the box for your vehicle.
| Rockford Fosgate T1S2-10S Specifications | |
|---|---|
| Power and Configuration | |
| Model | T1S2-10S (sealed version) |
| RMS Power Handling (CTA-2031) | 500 Watts |
| Peak Power Handling | 1000 Watts |
| Voice Coil | Single 2 Ohm |
| Voice Coil Diameter | 2.5 in (63.5 mm), pure copper |
| Sensitivity (1W/1m) | 82 dB |
| Frequency Response | 27 to 250 Hz |
| Thiele-Small Parameters | |
| Fs | 36 Hz |
| Qts | 0.76 |
| Qes | 0.86 |
| Qms | 7.0 |
| Vas | 15.4 L (0.544 cu ft) |
| Re | 1.8 ohms |
| Le | 0.71 mH |
| Sd | 356 cm2 |
| Xmax (one way) | 15 mm |
| Enclosure Recommendations (Rockford Fosgate) | |
| Sealed | 0.5 to 0.75 cu ft (14.2 to 21.2 L) |
| Vented | Not recommended (see the P version) |
| Fitment and Physical | |
| Mounting Depth | 3.01 in (76.5 mm) |
| Cutout Diameter | 9.13 in (232 mm) |
| Driver Displacement | 0.028 cu ft (0.82 L) |
| Magnet | Neodymium, 15.1 oz (0.43 kg) |
| Terminals | 10 AWG slot-loaded push spring |
| In the Box | 4 M5 x 43 mm hex screws, 8 M5 x 43 mm self-tapping screws, 40 mm bit driver |
| Shipping Weight | 11 lb (4.99 kg) |
No video available for this product yet.
Check back soon, or reach out and we'll walk you through it: 931-563-5151
