Proline X Pro 18-P M18 Professional Series ported enclosure, front baffle with slot port and branded gloss black acrylic insert, 36 by 21 inches, 87.8 square inches of port area.
Proline X Pro 18-P M18 Professional Series ported enclosure, front baffle with slot port and branded gloss black acrylic insert, 36 by 21 inches, 87.8 square inches of port area.

Proline X

Professional Series Ported 18" Enclosure | Sundown Audio M-Series M18

SKU: Pro 18-P M18

QUICK SPECS
  • Alignment: 5.41 cu ft net vented at 33.0 Hz. F3 26.6 Hz anechoic, 5.95 dB passband ripple
  • Driver: Sundown Audio M-Series M18 D1, 2000 W RMS, 35.0 mm Xmax, 26.20 Hz Fs
  • Build: Front-firing standard box, 2.25" three-layer baffle with the woofer flush-mounted in the outer layer, Sundown Audio logo acrylic, dado joinery, 87.8 sq in front slot port beside the woofer with one bend along the back wall, port and excursion gated at 2000 W
  • Cabinet: 36.00" W x 21.00" H x 21.50" D, 103 lb, threaded insert kit included
Shipping Icon
Shipping Included No freight charges at checkout on US orders. International orders are quoted live carrier rates at checkout.
USA Flag Rounded
Built in Tennessee CNC cut from 3/4" Langboard Elite MDF. V-groove and dado joinery.
Tools icon: hands-on mobile audio expertise since 1985
Advanced Terminal Cup Built in-house. ABS/Carbon Fiber. Stainless steel hardware. Copper ring terminals.
$ 974.99
In Stock and Ready to Ship
Shop Pay Financing available. Choose Shop Pay Installments at checkout.
Proline X Pro 18-P M18 Professional Series ported enclosure, front baffle with slot port and branded gloss black acrylic insert, 36 by 21 inches, 87.8 square inches of port area.

Professional Series Ported 18" Enclosure | Sundown Audio M-Series M18

Regular price $ 974.99
Sale price $ 974.99 Regular price
Unit price

More enclosures cut for Sundown Audio subwoofers: Sundown Audio Subwoofer Boxes

Enclosure Type Ported
External Dimensions 36.00" W x 21.00" H x 21.50" D
Gross Volume 6.99 cu ft
Net Volume 5.41 cu ft
Tuning Frequency 33.0 Hz
Port Area 87.8 Square Inches
Shipping Weight 112 lbs
INSTALLER'S TAKE

I built this box for the M18 because it needed the full 36 by 21 Professional envelope that an eighteen inch motor asks for, and the D1 and D2 coils share the same basket, so one listing covers both.

The port stays clean past the coil's own 2000 watt rating, so you are not going to hear it talk within the coil's rated range. Sundown doesn't say whether the printed 35 mm of Xmax is one-way or peak to peak, so I'm not stretching the excursion headroom on the strength of that number alone.

Wire the D1 coil in series for a nominal 2 ohms, or parallel for 0.5 ohms only on an amplifier built for that load. Wire the D2 coil in series for 4 ohms, or parallel for 1 ohm.

Sundown Audio publishes no mounting hole locations for the M-Series M18, so the inserts are not in the baffle when the box arrives. The insert kit is in the box: set the inserts where the woofer's own holes fall, with the drill bit and the 2.5 inch allen-head screws in the kit, and lay the gasket tape before the woofer goes down.

It ships dry. Do not add polyfill to a ported box. Set your subsonic filter at 28 Hz.

Product Details
Enclosure Specifications
Performance Graphs
Woofer Details
Materials
Product Details

Proline X Professional 18" Ported

An eighteen-inch box built to the M18's own numbers, vented near 33 Hz on the full-height Professional envelope

5.41 cu ft net Tuned 33.0 Hz F3 26.6 Hz 2.25" three-layer baffle Cut for the M-Series M18 Built in Tennessee
5.41cu ft net
33.0Hz tuning
26.6Hz F3 anechoic
87.8sq in port area

Why this driver is vented at 33.0 Hz

The Sundown Audio M-Series M18 pairs an 18 inch frame with a Qts of 0.684, and this cabinet gives it 5.411 cubic feet net, vented at 33.0 Hz through an 87.8 square inch port. F3 lands at 26.6 Hz with 5.95 dB of passband ripple. It is a single-driver box in the professional Sundown eighteen-inch line, sized for either the D1 or D2 coil.

Threaded insert kit ships with this box. Sundown Audio does not publish the mounting hole locations for the M-Series M18, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer.

The port on this box stays clean past the D1 coil's own 2000 W rated power, so the chuff threshold is never reached within the coil's rated range. Ripple across the passband holds at 5.95 dB, with F3 at 26.6 Hz on the 5.411 cubic feet net this cabinet gives the driver. Sundown publish full Fs, Qts, Qes and Qms for the M18, and those figures agree with each other, so the alignment behind this cabinet rests on the driver's own published numbers rather than a derived substitute.

What makes it Professional

Three-layer baffle, flush mount

Three layers of 3/4 inch Langboard Elite make a 2.25 inch front. The outer layer is routed to the flange, so the woofer sits flush with the face; the two layers behind it carry the mounting hardware and the load.

Sundown Audio logo acrylic

A glossy black acrylic insert with the Sundown Audio mark sits in the outer layer beside the woofer. It is standard on every Professional cabinet.

Threaded insert kit ships with this box

Threaded insert kit included, inserts NOT pre-installed: the manufacturer publishes no mounting hole locations, so the kit ships with the box for installation when the woofer goes in: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, allen key and gasket tape.

Port gated at 2000 W

The 87.8 square inch slot beside the woofer is sized so the channel runs 17.2 meters per second and the mouth 13.4 meters per second at the driver's rated power, under the 17 meters per second where a slot starts to chuff. The channel runs 13.25 inches along its wall and turns once along the back wall for another 5.94 inches, which is why a 33.0 Hz tuning fits a 21.50 inch deep box.

Why this is a Professional build

Every driver is run through the Performance Optimized wedge and down-fire before this chassis; the Professional box is where a driver lands when that smaller envelope, 30 inches wide and 18 inches deep with a triangular side port, cannot give it what it needs at its rated power. The M-Series M18 does not fit that envelope at all: no rule: 18. This box is the chassis with the width, depth and port to carry it.

What the price covers

Every Professional cabinet is priced the same way, by its size: this one is 9.41 cubic feet outside. At 103 lb it ships freight, quoted at checkout.

What Sundown Audio recommend

Sundown Audio publish a vented box for the M-Series M18 at 7.00 cubic feet on a basis they do not state, tuned to 32.0 Hz. This cabinet holds 5.41 cubic feet net and tunes to 33.0 Hz. They call for a port area of 112 sq in. The chassis envelope sets the volume here, and the port is sized so the mouth stays under the chuff threshold at the design power rather than to reach their figure.

The cabinet

36.00" W x 21.00" H x 21.50" D external. Two windowed braces run front to back either side of the woofer, clearing the cutout by two and a half inches. The box ships dry: polyfill detunes a ported alignment. Inside the 36 by 21 Professional envelope for a single 18, sized to the M18's shared basket across both coils. At this size it ships freight; the rate is calculated at checkout.

Sundown states 35 mm of Xmax for the M18 without saying whether that figure is one-way or peak to peak. If it is peak to peak, actual one-way travel is roughly half that, and the excursion check behind this alignment cannot be trusted at face value. Treat the printed Xmax as optimistic until Sundown states the basis: running the coil hard on the strength of the full 35 mm risks driving the cone past its real mechanical limit before the motor or the port say so. Sundown Audio does not publish the mounting hole locations for the M-Series M18, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer.

The numbers to respect

Set a 26 Hz subsonic filter, 24 dB per octave. Below tuning the vent stops loading the cone; with the filter in place the cone reaches 11.1 mm of its 35.0 mm at 2000 W.

Enclosure Specifications
SeriesProline X Professional
Driver-Specific FitmentSundown Audio M-Series M18 D1 (D1)
Enclosure TypePorted | Front-Firing Standard Box
External Width36.00 Inches
External Height21.00 Inches
External Depth21.50 Inches
Internal Volume (Gross)7.20 Cubic Feet
Internal Volume (Net After Displacement)5.41 Cubic Feet
Port TypeVertical Slot Beside The Woofer | Front Exit | One 90 Degree Bend Along The Back Wall
Port Geometry4.50 x 19.50 Inches, 87.8 Square Inches, 27.44 Inches Of Path
Port Area87.8 Square Inches
Port Tuning (Fb)33.0 Hz
Port Mouth1/2 In Roundover On All Four Edges, 112.8 Square Inches At The Face
Port Air Velocity17.2 m/s In The Channel, 13.4 m/s At The Mouth, At 2000 W (17.0 m/s Chuff Threshold)
Design Power Basis2000 W RMS (1.2 x The Driver Rating) For Port Velocity And Excursion
Predicted F326.6 Hz (Anechoic)
Passband Ripple5.95 dB (Anechoic)
Subsonic Filter26 Hz High-Pass, 24 dB/Octave - REQUIRED On A Vented Enclosure
Driver Fs26.20 Hz
Driver Qts0.684
Driver Qes / Qms0.782 / 5.452
Driver Vas112.182 Liters / 3.962 Cubic Feet
Driver Sd1147.5 Square Centimeters
Driver Mms651.24 g
Driver BL17.04
Driver Re2.1 Ohm
Driver Xmax35mm (One-Way)
Driver Displacement0.25 Cubic Feet (Published by Sundown Audio)
Driver Sensitivity85.8 dB
Driver Power Handling2000 Watts RMS
Driver Overall Diameter18.460 Inches (Sundown Audio Spec)
Mounting Depth Required14.050 Inches (Sundown Audio Spec)
Cutout Diameter16.680 Inches (Sundown Audio Spec)
Flush Mount Recess19.375 Inches In The Outer Layer
MaterialLangboard Elite 3/4" MDF
ConstructionShopSabre CNC / Two Windowed Braces Front To Back Either Side Of The Woofer
JoineryDado Joinery (CNC-Cut), Flat Panels
Front Baffle ConstructionThree 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer
Baffle Layers3
AcrylicGlossy Black Sundown Audio Logo Insert, Outer Layer, Standard
Mounting HardwareThreaded Insert Kit Included: 8-12 Inserts, Drill Bit, 2.5 In Allen-Head Screws, Allen Key, Gasket Tape
Voice Coil ConfigurationD1
Terminal CupProline X ABS/Carbon Fiber Composite | Back Panel, Terminal-Cup Side | 12g OFC Pre-Wired
DampingNone - Ships Dry. Polyfill Detunes A Ported Enclosure
Recommended Power1400-2000 Watts RMS (Sundown Audio Rated: 2000W RMS)
Carpet FinishPlush Black
Shipping Weight112 lb
ShippingFreight, Rated At Checkout
Bundle OptionsEnclosure Only (Bring Your Own Sundown Audio M-Series M18)
Warranty2-Year Limited (Enclosure)
ManufacturedTullahoma, Tennessee, USA
Performance Graphs
Net airspace
5.41
cu ft
Tuning
33.0
Hz · Fb
Half power
26.6
Hz · F3, anechoic
Xmax at
19911
W RMS · 26 Hz subsonic
With NO filter
3536
W RMS · unfiltered
Port
13.4
m/s at the mouth · 2000 W

01Is this driver right for a ported box?

Efficiency bandwidth product places the motor before anything else is decided.

EBP = Fs ÷ Qes = 33.5
SEALED 0–50 TRANSITION 50–100 PORTED 100–150 0 50 100 150 EBP 33.5
Sundown Audio M-Series M18 D1 · EBP 33.5
Under 50 the raw number leans sealed. The Sundown Audio M-Series M18 D1 reads 33.5, so this is a ported build against the grain of its own EBP: it works because the alignment is tuned for in-car response rather than for an anechoic curve, and because the cabinet holds port area and volume the driver can actually use.

02What the box does to it

5.41 cu ft net against a 112.2 L Vas, vented at 33.0 Hz.

Fb = 33.0 Hz  ·  F3 = 26.6 Hz  ·  passband ripple 5.95 dB
20 30 50 70 100 150 200 +12 +8 +4 0 −4 −8 −12 −16 −20 −24 FREQUENCY · Hz LEVEL · dB −3 dB Fb 33.0
Sundown Audio M-Series M18 D1 · Fb 33.0 Hz, F3 26.6 Hz
Anechoic, before any cabin gain, with the 26 Hz subsonic filter already applied. The vent takes over below 33 Hz and the cone stops doing the work there, which is what holds travel down at the bottom of the passband.

03Perceived Ported vs Sealed

This cabinet, 5.41 cu ft net vented at 33.0 Hz, against Sundown Audio's recommended range (low end) sealed box, 5.00 cu ft.

Ported Fb 33.0 Hz  ·  the 5.00 cu ft sealed box runs Qtc 0.92, Fc 35 Hz
20 30 50 70 100 150 200 +12 +8 +4 0 −4 −8 −12 −16 −20 −24 FREQUENCY · Hz LEVEL · dB +6.1 dB at 39 Hz
Ported · this cabinet, 5.41 cu ft, Fb 33.0 HzSundown Audio's recommended sealed, 5.00 cu ft net, Qtc 0.92
Shaded blue is where the ported alignment is louder for the same power, orange where the sealed one is. The sealed curve is Sundown Audio's recommended range (low end) sealed box, 5.00 cu ft, not this cabinet with the port blocked: two different boxes, because that is the choice a buyer actually has. Across 25 to 60 Hz the vent is worth 6.1 dB at its widest and 4.1 dB on average. This is the anechoic picture, which is not what you hear in a car.

04Real World Ported vs Sealed

The same two boxes with cabin gain applied, 45 Hz corner, 18 dB ceiling.

Flatness across 25–60 Hz: ported 5.8 dB spread, the 5.00 cu ft sealed box 4.4 dB
20 30 50 70 100 150 200 +12 +8 +4 0 −4 −8 −12 −16 −20 −24 FREQUENCY · Hz LEVEL · dB +6.1 dB at 39 Hz
Ported, in-car · 5.8 dB spreadSundown Audio's recommended sealed, 5.00 cu ft net, in-car · 4.4 dB spread
Cabin gain lifts both boxes by the same amount, so the gap between them does not change: what changes is the shape each one ends up with. A car pressurizes below roughly 45 Hz, which fills in the sealed box's shallower rolloff and over-drives it where the ported box is already flat. Across 25 to 60 Hz, the band kick and bass fundamentals occupy, this alignment holds 5.8 dB of spread against 4.4 dB for Sundown Audio's recommended range (low end) sealed box, 5.00 cu ft. The sealed curve is flatter on paper; the ported one trades that for output. Note where the curves cross. Below about 23 Hz the sealed alignment becomes the louder of the two and stays louder all the way down, by up to 2.5 dB: a sealed box rolls off gently into the subsonic region where a vented one falls away steeply once it is below tuning and the vent stops contributing. If the content you are chasing lives below 23 Hz, a sealed alignment reaches further down than this one does. Cabin gain here is a house assumption, not a measurement of your vehicle.

05The watts that reach Xmax (in this enclosure)

Travel scales with the square root of power, so there is one wattage that puts the cone exactly on Sundown's published 35.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off.

PXmax = 19911 W with a 26 Hz subsonic  ·  3536 W with none  →  the filter is worth 5.6×
20 30 50 70 100 150 200 0 8 16 24 32 40 FREQUENCY · Hz CONE TRAVEL · mm PAST LINEAR TRAVEL · Xmax 35.0 mm 19911 W reaches Xmax here
19911 W · subsonic at 26 Hz, 24 dB/oct3536 W · no subsonic filterXmax 35.0 mm one-way, published
Each trace touches the limit and no further, because each is drawn at the exact power that puts the cone on 35.0 mm. With a 26 Hz subsonic that takes 19911 W, reached first at 24 Hz. Take the filter away and the same cabinet reaches 35.0 mm on 3536 W — the filter is worth 5.6× the safe power. A vent unloads the cone below tuning, so there is nothing holding it once the box stops loading: on a sealed build a subsonic filter is an improvement, here it is required equipment. The unfiltered trace is still rising where this chart stops at 20 Hz, so treat 3536 W as a bound rather than a floor. Every wattage on this page is a MECHANICAL limit, not an electrical one. It is the power at which the cone runs out of linear travel in this cabinet, and nothing more. What the voice coil can dissipate as heat is a separate ceiling set by the driver, not by the box — Sundown rate this one at 2000 W RMS, and that is the number that binds first here: heat stops you before travel does, so treat 2000 W as the ceiling and the travel figures above as headroom. Final wired impedance, amplifier output and how long you hold the level are all electrical questions this graph does not answer.
Woofer Details
The M is the entry point to Sundown's mega platform, below the X, Z and NS lines, and is the one of them they say opens up sealed and infinite baffle use as well as ported. Sundown states 35 mm of one way linear excursion against 59.5 mm to mechanical bottom. This enclosure is cut for 14.05 in of mounting depth and a 16.68 in cutout, taken from Sundown Audio's published figures rather than measured off a sample.
DriverSundown Audio M-Series M18
Coil OptionsDual 1 Ohm or Dual 2 Ohm
Voice Coil Diameter3 in, 4 layer round wire aluminum
Coil FormerAluminum
SurroundMega Roll
SpiderSundown PG Linear Suspension, Computer Optimized
BasketCustom Tooled Mega Platform, US Patents D691596, D691597, D691598 and D741841
MotorQuad Stacked, 200 mm Motor Structure, 88 mm Total Stack Height, Hyper Extended Pole, 20 mm Top Plate, Magnet ID Aluminum Shorting Ring
Motor Diameter7.87 in
CoolingHigh Velocity Pole Vent, Heavily Vented Magnetic Gap Through The Back Plate, Cast Aluminum Frame Base Venting
Power, RMS2000 W
Peak Power4000 W
Sensitivity85.8 dB (D1), 86.1 dB (D2), SPL (1W/1m)
Mounting Depth14.05 in
Cutout Diameter16.68 in
Frame Outside Diameter18.46 in
Driver Displacement0.25 cu ft
Driver Warranty2 Year Limited, Authorized Dealer Purchase, Original Owner
Materials
Material

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Professional Series enclosure is CNC-cut from Langboard Elite MDF, 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure, because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications

Langboard Elite MDF: Published Mill Data

Property Value Why It Matters
Panel Stock Langboard Elite MDF Named, verifiable panel source, not generic "high-density MDF"
Thickness 3/4" (18mm) Industry standard for subwoofer enclosures; panels below this flex under pressure
Density 48.5 lbs/ft³ Higher density = less porosity, better screw retention, reduced resonance
Internal Bond 200 psi Measures resistance to delamination under sustained internal pressure. The most enclosure-relevant spec on this sheet
Modulus of Rupture (MOR) 4,200 psi Bending strength before the panel breaks, relevant for larger unsupported baffle spans
Modulus of Elasticity (MOE) 410,000 psi Stiffness under load; higher MOE means less panel flex under bass pressure, less resonance
Face Screw Holding 325 lbs How firmly the panel surface holds a screw; critical for baffle joint integrity over time
Edge Screw Holding 250 lbs Panel edge retention, relevant for every joint that isn't face-to-face
Internal Bond

200 psi: The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually. The symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE: Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness, its resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level, not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge: Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint, where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Professional Series enclosure is not going anywhere.

Sourcing

Named Panel Stock: Not "Premium MDF"

The phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification. It is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements, and in how the box holds up two years into daily use.

CNC-Cut to Spec

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.

Handcrafted in USA

Handcrafted in USA

Hand-assembled at our facility in Tullahoma, TN. Every enclosure is inspected before it ships.

Tuned to the Build

Tuned to the Build

Internal volume and port geometry are calculated to spec and CNC-cut to exact dimensions. The box performs the same way every time.

Frequently Asked Questions

Why is this enclosure tuned to 33.0 Hz?

Why is this a Professional build and not a Performance Optimized box?

Threaded inserts or a kit?

Do I need a subsonic filter?

Would a sealed box be better for me?

How does the front port work?

What does the price cover, and how does it ship?

Is the M-Series M18 included?

Related Articles

Look Ma No Seat Mods caption over three views of subwoofers fitted under a truck's rear seats

Ford Maverick Sub: The Ultimate Audio Upgrade

Upgrading your Ford Maverick subwoofer can significantly enhance your car audio experience. Diffe...

Read Article →
12 Inch Speaker Box for Car title over a gloved hand tape-measuring a carpeted ported box beside a cut drawing

12 Inch Speaker Box for Car: Sizing and Box Design Guide

Sealed or ported, how much airspace a 12 actually needs, and what goes wrong when the volume is ...

Read Article →
Best Subwoofer Boxes for Car Audio title over four enclosure styles lined up on a workshop floor

Best Subwoofer Boxes for Car Audio

The net volume, tuning frequency and cutout diameter for six Proline X enclosures, plus how to m...

Read Article →
Stylized display of subwoofers flanked by screens showing frequency response graphs

Unlocking Deep Bass: The Ultimate Guide to Subwoofer Q Fa...

The Q factor is an important parameter in audio systems affecting sound quality. A high Q factor ...

Read Article →