Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box
Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box
Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box
Proline X custom Ford Bronco quad 10 inch sealed downfire subwoofer enclosure with 1/2 inch filleted edges on 2.5 inch feet, 42 x 17 inch footprint
Underside view: four Prodigy Audio NB2-10D4 10 inch subwoofers staggered on the downfire baffle with six feet
Mechanical drawing: baffle layout, plan section with two chambers and front-to-back window braces, window brace detail, front elevation, side section, specifications
Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box
Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box
Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box
Proline X custom Ford Bronco quad 10 inch sealed downfire subwoofer enclosure with 1/2 inch filleted edges on 2.5 inch feet, 42 x 17 inch footprint
Underside view: four Prodigy Audio NB2-10D4 10 inch subwoofers staggered on the downfire baffle with six feet
Mechanical drawing: baffle layout, plan section with two chambers and front-to-back window braces, window brace detail, front elevation, side section, specifications

Proline X

Bronco Quad 10" Sealed Downfire Enclosure | Prodigy Audio NB2-10D4 | Custom

SKU: PX-BRONCO-Q10S-NB2-1

QUICK SPECS
  • Lead time: Special order, ships within 15 working days of purchase
  • Alignment: 2.90 cu ft gross, 2.39 cu ft net in 2 sealed chambers, 0.60 cu ft per driver, Qtc 0.77, F3 47.5 Hz anechoic
  • Driver: Prodigy Audio NB2-10D4 (x4) | 350 W RMS Each | 14 mm Xmax | Dual 4 Ohm
  • Build: Downfire on 6 feet with a 2.50 in floor gap, staggered surface-mount on a 1.50 in double baffle, center divider, 2 window braces per chamber, 2 terminal cups
  • Cabinet: 42.00" W x 17.00" D x 10.375" H (12.875" with feet)
Shipping Icon
Shipping Included No freight charges at checkout on US orders. International orders are quoted live carrier rates at checkout.
USA Flag Rounded
Built in Tennessee CNC cut from 3/4" Langboard Elite MDF. V-groove and dado joinery.
Tools icon: hands-on mobile audio expertise since 1985
Advanced Terminal Cup Built in-house. ABS/Carbon Fiber. Stainless steel hardware. Copper ring terminals.
$ 529.99
Shop Pay Financing available. Choose Shop Pay Installments at checkout.
Proline - X Bronco Edition Dual 12-inch Down Firing Sealed Subwoofer Box

Bronco Quad 10" Sealed Downfire Enclosure | Prodigy Audio NB2-10D4 | Custom

More enclosures cut for Prodigy Audio subwoofers: Prodigy Audio Subwoofer Boxes

Enclosure Type Sealed
External Dimensions 42.00" W x 10.375" H x 17.00" D
Gross Volume 2.90 cu ft
Net Volume 2.39 cu ft
Shipping Weight 55 lbs
INSTALLER'S TAKE

I built this one for a Bronco owner who wanted four 10s without giving up the cargo floor: 42 by 17 inches of footprint, 12.875 inches tall on its feet.

The four drivers fire down into a 2.50 inch gap and the bass comes out around all four sides. They are staggered two front and two back because four 10 inch frames will not fit in a row in 42 inches, and the center divider makes two sealed chambers, two drivers each.

Each NB2-10D4 is a dual 4 ohm driver. Per chamber, wire each driver to 2 ohms (coils parallel) and the pair in series for 4 ohms, or each driver to 8 ohms (coils series) and the pair in parallel for 4 ohms. Two 4 ohm chambers can then run on two channels, or in parallel for 2 ohms on one, or in series for 8 ohms. Check what your amplifier is rated for before you wire it.

Set the box on a flat surface so all six feet carry it, and keep the floor gap clear: a blanket or bag pushed under the edge will choke the output. It is built to order, so give it 15 working days.

Product Details
Enclosure Specifications
Performance Graphs
Woofer Details
Materials
Product Details

Bronco Quad 10" Sealed Downfire

A custom downfire enclosure for four Prodigy Audio NB2-10D4 in a 42 by 17 inch footprint, two sealed chambers, 2.39 cubic feet net

Special order: ships in 15 working days2.90 cu ft gross2.39 cu ft net2 sealed chambersF3 47.5 HzDownfire on 2.5" feetBuilt in Tennessee

Special order, built for you. This cabinet is cut and built after you order it and ships within 15 working days of purchase.

2.90cu ft gross
2.39cu ft net
0.60cu ft per sub
0.77Qtc sealed
47.5Hz F3 anechoic

Built for the Bronco

This box puts four 10 inch Prodigy Audio NB2-10D4 drivers into a 42 inch wide, 17 inch deep footprint at 10.375 inches tall, 12.875 inches with the feet. It holds 2.90 cubic feet gross and 2.39 net, split into two sealed chambers so every driver works against 0.60 cubic feet. That is a Qtc of 0.77 with an anechoic F3 of 47.5 Hz, and in a Bronco cabin the rolloff below that is largely filled in by cabin gain.

The Prodigy NB2-10D4 is a 0.514 Qts driver with 14 mm of travel and a recommended sealed box of 0.65 cubic feet; at 0.60 cubic feet each it sits right at that alignment.

The build

Four 10s in a 42 by 17 footprint

Two drivers along the front and two along the back, staggered so four 10.25 inch frames fit a 42 inch by 17 inch baffle with 0.79 inch edges. The drivers surface-mount on a 1.50 inch double baffle, the bottom panel of the box, over a 9.125 inch cutout.

Two sealed chambers

A 3/4 inch center divider splits the box into two sealed chambers of 1.20 cubic feet net. Drivers 1 and 2 share the left chamber, 3 and 4 the right, and each chamber has its own terminal cup on the back wall so the pairs can be wired and fed independently.

Downfire on six feet

Six 1.5 by 1.5 inch feet hold the baffle 2.50 inches off the floor. The cones fire into that gap and the bass comes out around all four sides of the box. The NB2 cones stay well clear of the floor at full excursion.

Window braced in every chamber

Each chamber has two 3/4 inch MDF window braces running front to back, one off the front wall and one off the back wall, set in the gap between the staggered drivers. Each brace is glued to the baffle, the top panel and its wall, with a 1.50 inch frame around an open window so air moves freely, and each stops 1/4 inch short of the woofer cutout. With the center divider, that ties the baffle, top and long front and back panels together in the middle of each chamber.

What the price covers

Delivery to the 48 states is inside the price and checkout adds nothing. Special order: built after purchase and shipped within 15 working days. The loaded option includes four Prodigy Audio NB2-10D4 drivers installed and wired.

The numbers to respect

The four NB2-10D4 drivers are rated 350 W RMS each, 1400 W total, and that thermal rating is the ceiling. Mechanically they reach their 14 mm of travel on about 1800 W without a subsonic filter and about 2100 W with a 25 Hz filter, so travel is not the limit at rated power. A light layer of fill is fine in a sealed box.

Enclosure Specifications
SeriesProline X Custom | Vehicle: Ford Bronco
AvailabilitySpecial Order | Ships Within 15 Working Days Of Purchase
Driver-Specific FitmentProdigy Audio NB2-10D4 (x4) | 350 W RMS Each | 14 mm Xmax | Dual 4 Ohm
Enclosure TypeSealed | Downfire | Quad 10"
External Width42.00 Inches
External Depth17.00 Inches
External Height10.375 Inches (12.875 Inches With Feet)
Internal Volume (Gross)2.90 Cubic Feet
Internal Volume (Net After Displacement)2.39 Cubic Feet (After Drivers, Divider And Bracing)
Chambers2 Sealed Chambers, 1.20 Cubic Feet Net Each, 2 Drivers Per Chamber
Volume Per Driver0.60 Cubic Feet
System Qtc0.77
Predicted F347.5 Hz (Anechoic)
Baffle1.50 In Double 3/4 MDF | Bottom Panel | Surface Mount, Staggered
Cutout Diameter9.125 In (Prodigy Spec, 9-1/8 In) | 10.25 In Frame
Driver SpacingFront Row At 5.92 In From Front Edge, Back Row At 11.08 In | Divider At Center
Internal Bracing3/4 In Center Divider (Dado Set) + 2 Front-To-Back 3/4 In MDF Window Braces Per Chamber, Baffle To Top
Motor Clearance4.00 In From Motor To Top Panel (5.625 In Mounting Depth)
Feet6x 1.5 x 1.5 x 2.5 In | 2.50 In Floor Gap
Terminal Cups2 (One Per Chamber), Back Panel, Pre-Wired
MaterialLangboard Elite 3/4" MDF
ConstructionShopSabre CNC | Dado Joinery
Carpet FinishPlush Black
DampingLight Fill Recommended For Sealed (Optional)
Shipping Weight55 lb Enclosure Only | 135 lb Loaded (Est.)
ShippingIncluded In The 48 States
Warranty2-Year Limited (Enclosure)
ManufacturedTullahoma, Tennessee, USA
Performance Graphs
Gross airspace
2.90
cu ft
Net airspace
2.39
cu ft · 2 chambers
Per sub
0.60
cu ft sealed
System Q
0.77
Qtc
Half power
47.5
Hz · F3, anechoic
Xmax at
2129
W RMS · 4 subs, 25 Hz subsonic
With NO filter
1814
W RMS · 4 subs

01Is this driver right for a sealed box?

Efficiency bandwidth product places the motor before anything else is decided.

EBP = Fs ÷ Qes = 56.1
SEALED0–50TRANSITION50–100PORTED100–150EBP 56.1
Prodigy Audio NB2-10D4 · EBP 56.1
Prodigy Audio NB2-10D4 reads 56.1, at the sealed end of the transition band: a motor that works well in a small closed box. This cabinet takes that trade for compact size, tight transient response and a shallow rolloff that cabin gain fills in.

02What the box does to it

2.90 cu ft gross, 2.39 cu ft net in two sealed chambers: 0.60 cu ft per driver against a 21.1 L Vas.

Qtc = 0.77  ·  F3 = 47.5 Hz  ·  peak 0.01 dB
20305070100150200+40−4−8−12−16−20−24FREQUENCY · HzLEVEL · dB−3 dB
Prodigy Audio NB2-10D4 · Qtc 0.77, F3 47.5 Hz
Anechoic, before cabin gain. A sealed box rolls off at 12 dB per octave below F3, and a vehicle cabin adds roughly 12 dB per octave below about 45 Hz, so in the Bronco the two largely cancel and the response stays usable well below the anechoic F3.

03Downfire and two chambers

Why the layout is what it is.

All four drivers fire down into a 2.50 inch floor gap on six feet, staggered two along the front and two along the back so four 10 inch frames fit a 42 by 17 inch footprint. A center divider makes two sealed chambers of 1.20 cu ft net, two drivers per chamber, so each driver works against 0.60 cu ft.

04The watts that reach Xmax (in this enclosure)

Travel scales with the square root of power, so there is one wattage that puts all four cones on the published 14.0 mm. Power figures are for all four drivers, split evenly.

PXmax = 2129 W with a 25 Hz subsonic  ·  1814 W with none
203050701001502000816243240FREQUENCY · HzCONE TRAVEL · mmPAST LINEAR TRAVEL · Xmax 14.0 mm
2129 W · subsonic at 25 Hz, 24 dB/oct1814 W · no subsonic filterXmax 14.0 mm one-way
A sealed box keeps loading the cone below resonance, so travel rises gently toward 20 Hz instead of running away. Without a filter the four drivers reach 14.0 mm on 1814 W total; a 25 Hz subsonic raises that to 2129 W. These are mechanical limits, not electrical ones. Prodigy rate the NB2-10D4 at 350 W RMS, 1400 W for four, and that thermal rating is the ceiling that binds first.
Woofer Details
Prodigy's first-level ten: a double stacked magnet structure on a long 2 inch coil, with 14 mm of one-way travel at 70% Bl and a stamped steel frame. Prodigy publishes a dual 4 ohm version only. The figures below are Prodigy's own, and the enclosure is cut for its 9.125 in cutout and 5.625 in mounting depth.
DriverProdigy Audio NB2-10D4
CoilDual 4 Ohm
Voice Coil2 in, 4 Layer High Temperature Copper
Coil FormerBlack Aluminum
MotorDouble Stacked Magnet, Center Pole Vent, Rear Radial Cooling Holes
ConePaper
SurroundFoam
SpiderCotton Blend
FrameStamped Steel
TerminalsChrome Push Terminals
Power Handling, RMS350 W
Fs34.295 Hz
Qts0.514
Qes / Qms0.611 / 3.24
Vas21.054 L
Re6.1 Ohm
Bl20.11 T·m
Mms165.223 g
Cms139.032 µm/N
Sensitivity84.2 dB
Xmax, One-Way14 mm (At 70% Bl)
Mounting Depth5.625 in
Cutout Diameter9.125 in
Frame Outside Diameter10.25 in
Driver Displacement0.11 cu ft
Driver Warranty2 Years, Original Purchaser With Receipt
Materials
Material

Built From a Spec Sheet, Not a Sales Sheet

Every Proline X Professional Series enclosure is CNC-cut from Langboard Elite MDF, 3/4" (18mm) panels produced to published mill specifications. Most enclosure manufacturers source generic MDF without published data. We can tell you the internal bond rating, the modulus of elasticity, the modulus of rupture, and the face and edge screw holding strength for every panel in this enclosure, because we chose the material based on those numbers, not on price or availability.

Langboard Elite is produced in the United States. The specifications below are pulled directly from Langboard's published mill data and are verifiable. This is the same panel stock used in our full Proline X lineup.

Specifications

Langboard Elite MDF: Published Mill Data

Property Value Why It Matters
Panel Stock Langboard Elite MDF Named, verifiable panel source, not generic "high-density MDF"
Thickness 3/4" (18mm) Industry standard for subwoofer enclosures; panels below this flex under pressure
Density 48.5 lbs/ft³ Higher density = less porosity, better screw retention, reduced resonance
Internal Bond 200 psi Measures resistance to delamination under sustained internal pressure. The most enclosure-relevant spec on this sheet
Modulus of Rupture (MOR) 4,200 psi Bending strength before the panel breaks, relevant for larger unsupported baffle spans
Modulus of Elasticity (MOE) 410,000 psi Stiffness under load; higher MOE means less panel flex under bass pressure, less resonance
Face Screw Holding 325 lbs How firmly the panel surface holds a screw; critical for baffle joint integrity over time
Edge Screw Holding 250 lbs Panel edge retention, relevant for every joint that isn't face-to-face
Internal Bond

200 psi: The Number That Actually Matters for Enclosures

The internal bond rating measures how well the MDF panel resists delamination under sustained pressure applied perpendicular to the face. In a subwoofer enclosure, every bass transient generates a pressure pulse that pushes outward on every panel simultaneously. A panel that begins to delaminate internally loses stiffness gradually. The symptoms are slow: a box that starts to sound softer, less defined, less punchy over months of use. 200 psi internal bond is the spec that determines how long this enclosure holds its acoustic integrity under daily use at real power levels.

Stiffness

410,000 psi MOE: Less Flex, Less Resonance

The modulus of elasticity measures panel stiffness, its resistance to bending under load. A stiffer panel flexes less under the pressure generated by a high-excursion driver at volume. Panel flex is a source of acoustic coloration: the panel itself begins to radiate sound at its own resonant frequency, adding distortion to the output. 410,000 psi stiffness combined with V-groove and dado joinery means the panels stay rigid and the bracing controls resonance at the structure level, not the panel level. The bass you hear comes from the driver, not the box.

Screw Holding

325 lb Face / 250 lb Edge: Joints That Stay Locked

Screw holding strength determines how firmly the panel grips a fastener at the face and at the edge. This matters most at the baffle joint, where the front panel meets the side panels and where the driver is mounted. A panel with low screw holding strength allows fasteners to loosen over time under vibration, leading to air gaps at the joint and loss of acoustic seal. 325 lb face screw holding strength means the baffle hardware stays put. Combined with dado joinery and adhesive, the front panel on a Proline X Professional Series enclosure is not going anywhere.

Sourcing

Named Panel Stock: Not "Premium MDF"

The phrase "premium MDF" or "high-density MDF" appears on marketing copy for enclosures across every price point, from $40 to $400. It is not a specification. It is a description with no defined standard. Langboard Elite is a named, sourced, mill-documented product with published data. We name it in our copy because naming it holds us accountable to the spec. You can look up Langboard Elite independently, verify the numbers on this page, and confirm you are getting what we say you are getting. That is the point.

Why Proline X?

Most enclosures are built to a price point. Proline X is built to a spec. Every box starts with published-data MDF, gets CNC-cut to exact internal volume, and is assembled by hand in our Tennessee facility. The difference shows up in the measurements, and in how the box holds up two years into daily use.

CNC-Cut to Spec

CNC-Cut to Spec

Panels are machine-cut on ShopSabre CNC routers and joined with V-groove and dado joinery. Consistent geometry, no hand-cut variance, no gaps at the joints.

Handcrafted in USA

Handcrafted in USA

Hand-assembled at our facility in Tullahoma, TN. Every enclosure is inspected before it ships.

Tuned to the Build

Tuned to the Build

Internal volume and port geometry are calculated to spec and CNC-cut to exact dimensions. The box performs the same way every time.

Frequently Asked Questions

Will this fit my Bronco?

Why two chambers instead of one?

Why are the woofers staggered?

Do I need a subsonic filter?

How much clearance do the woofers have under the box?

How should I wire it?

What does the price cover, how long does it take, and how does it ship?

Are the NB2-10D4 subwoofers included?

Related Articles

Compact carpeted subwoofer enclosure with an empty driver cutout sitting in a car boot

Tight Spaces, Perfect Fit: 6.5 Inch Subwoofer Enclosures

When it comes to upgrading your audio system, one of the key components that can make a significa...

Read Article →
Carpet-wrapped cylindrical tube subwoofer enclosure strapped in a hatchback cargo area

Best subwoofer tube enclosure options

Regarding car audio, bass is essential to the overall sound experience. A subwoofer tube enclosur...

Read Article →
Two 8-inch subwoofer enclosures on a bench, a sealed box beside a ported box with a slot port

The Ultimate Guide to 8 Inch Subwoofer Enclosures

Are you looking to enhance the bass in your car's audio system? A subwoofer enclosure might be ju...

Read Article →
« Previous 1 … 6 7 8