Loaded Subwoofer Enclosure: What It Is and How to Pick One
A loaded enclosure is a box with the subwoofer already installed. The amplifier is not included...
Read Article →Arc Audio
SKU: Cu 4.4
Arc Audio Copper Series | Reference Class A/B
Arc Audio's flagship. A four-channel reference amplifier with a genuine Class A/B output stage on a multi-rail supply, housed in brushed copper and satin silver. Built for the system where the amplifier is supposed to disappear and leave the music alone.
Stereo at 4 Ohms
110W x 4
All four channels
Stereo at 2 Ohms
175W x 4
All four channels
Bridged at 4 Ohms
350W x 2
Two bridged channels
Those are honest Class A/B numbers, and they behave differently under load than the same figures from a switching amplifier. One Cu 4.4 runs a front stage actively, or a full set of components with a bridged pair on midbass. Arc also builds the three-channel case directly into the design: tweeter and midrange on two channels, midbass on the bridged pair.
Competition and high-end installers often use a pair of Cu 4.4s rather than one larger amplifier, one per side, so the left and right channels never share a power supply or a ground path. That is the configuration the amplifier was designed around, and it is the reason the input section offers balanced as well as single-ended connection.
Inputs are balanced or single-ended, switchable between RCA and speaker level, 200 mV to 4V sensitivity into a 10k ohm load, with one gain control per channel pair. Each pair has a high-pass, low-pass or bypass crossover at 12 dB per octave Linkwitz-Riley, adjustable from 55 Hz to 550 Hz, and a x10 multiplier takes that same control up to 550 Hz to 5.5 kHz for active tweeter and midrange work. Bass boost is available on the front channels, 0 to 15 dB at 45 Hz.
The frequency response is published at 10 Hz to 75 kHz, which is well beyond the audio band on both ends and is the kind of figure a reference amplifier is measured on rather than sold on. Signal to noise is -84 dB at 1 watt and -105 dB at full power.
Plan your power delivery. This amplifier is internally fused at 3 x 30 Amp and operates from 8V to 17.1V. A Class A/B design draws meaningfully more current than a switching amplifier at the same output, so size the wire, the fuse and the charging system for the real load, not for a Class D equivalent.
A variable-speed ball-bearing fan handles the thermal load, which is what lets a Class A/B amplifier of this output sit in a trunk or under a seat. Onboard diagnostics cover thermal, under and over voltage, short circuit and DC fault conditions. Auto-sense turn-on is available by DC detect.
Installation summary: 11 x 8.65 x 2.65 in, Class A/B multi-rail, internally fused 3 x 30A, 8V to 17.1V operating range, 2 or 4 analog input channels selectable, balanced or single-ended with an RCA / speaker level switch, 10k ohm input impedance, 200 mV to 4V sensitivity, 12 dB Linkwitz-Riley high-pass / low-pass / bypass per channel pair with a x10 range multiplier, 0-15 dB bass boost at 45 Hz on the front channels, variable-speed ball-bearing fan.
This is a build-your-best-system amplifier. It belongs in front of a serious set of components, fed by a Pro-Series DSP or another high-resolution source, in an install where someone cares how the stage images. If you want maximum watts per dollar or per inch, the X2 and Blackbird Class D amplifiers are the better value and we will tell you so.
Audio Intensity is an authorized Arc Audio dealer shipping from Tullahoma, Tennessee. Tell us the speakers you are running, their impedance and whether a DSP is in the chain, and we will confirm the channel assignment, the crossover plan and the current draw before you order.
The Cu 4.4 is designed to sit behind a processor. Ask us about pairing it with an Arc Audio Pro-Series DSP, and about the Cu 4.2 and Cu 6.2 if you need a different channel count in the same Copper Series chassis family.
| ARC Audio Cu 4.4 Amplifier Specifications | |
|---|---|
| Power Output | |
| Total Amplified Output Channels | 4 |
| Stereo at 4 Ohms | 110 Watts RMS x 4 |
| Stereo at 2 Ohms | 175 Watts RMS x 4 |
| Bridgeable Speaker Outputs | Yes |
| Bridged at 4 Ohms | 350 Watts RMS x 2 |
| Output Type | Class A/B with a multi-rail supply |
| Output Load Switch | Not available |
| Audio and Crossovers | |
| Frequency Response | 10 Hz to 75 kHz |
| S/N Ratio at 1 Watt | -84 dB |
| S/N Ratio at Full Power | -105 dB |
| Crossover Type, Ch 1/2 and Ch 3/4 | High-pass, low-pass or bypass, 12 dB Linkwitz-Riley |
| Crossover Range, Ch 1/2 and Ch 3/4 | 55 Hz to 550 Hz, with a x10 multiplier giving 550 Hz to 5.5 kHz |
| Crossover and Front-End Bypass | Yes |
| Bass Boost | 0 to 15 dB at 45 Hz, front channels only |
| Bandpass Crossovers | Not available |
| Inputs | |
| Input Channels (Analog) | 2 or 4, selectable |
| Input Type | Balanced or single-ended, RCA or speaker level selected by switch |
| Input Sensitivity | 200 mV to 4V |
| Input Impedance | 10k ohms |
| Input Gain Type | Analog control, one per pair of channels (L/R) |
| Auto-Sense Turn-On | Yes, DC detect only |
| Compatible External Level Control | Yes, when using the onboard crossover in low-pass mode |
| Power, Cooling and Physical | |
| Fuse Rating | Internally fused, 3 x 30 Amp |
| Operating Voltage Range | 8V to 17.1V |
| Cooling | Variable-speed ball-bearing fan |
| Onboard Diagnostics | Thermal, under and over voltage, short circuit and DC fault protection |
| Dimensions | 11 in (L) x 8.65 in (W) x 2.65 in (H) |
| Idle Current | Not published by Arc Audio (their table lists it as TBD) |
| Dealer and Warranty | |
| Condition | Brand new |
| Warranty | Arc Audio 1-year warranty, purchased from an authorized dealer |
| Arc Audio SKU | 82886300197 |
See every Arc Audio subwoofer box and enclosure, each cut for a specific Arc Audio driver.