Loaded Subwoofer Enclosure: What It Is and How to Pick One
A loaded enclosure is a box with the subwoofer already installed. The amplifier is not included...
Read Article →Arc Audio
SKU: ARC 1000.2
Arc Audio ARC Series Amplifiers
Five hundred watts per channel at 4 ohms, six hundred at 2 ohms, and 1,200 watts bridged into a single 4-ohm load. The ARC 1000.2 is the two-channel member of Robert Zeff's ARC Series: a high-pressure die-cast chassis with computer-managed forced induction cooling, balanced differential inputs, and an adjustable switching frequency that can be moved out of the way of a noise problem.
Stereo at 4 Ohms
500W x 2
Rated continuous
Stereo at 2 Ohms
600W x 2
Rated continuous
Bridged at 4 Ohms
1,200W
Single channel, subwoofer duty
Two channels of 500 watts is enough to run a serious set of components hard, and bridged into a single 4-ohm load the same amplifier delivers 1,200 watts to a subwoofer. The bridged figure is simply the 2-ohm stereo rating recombined, which is why the amplifier can do it without strain. Note that Arc Audio's product description rounds the series to a thousand watts; the published specification table is the figure quoted here.
The ARC Series is built around three amplifiers that share one chassis, one heat sink and one cooling system, all producing roughly a thousand watts. The 1000.2 is the two-channel version, and it is the one to use when you want the most power per channel the platform offers. Run it on a component front stage, on a pair of midbass drivers in an active build, or bridged on a single subwoofer.
In its standard analog form the ARC 1000.2 carries a high-pass, low-pass and full-range crossover on channels 1 and 2 covering 50 Hz to 500 Hz, plus an adjustable bass boost from 0 to 12 dB centered at 45 Hz. Input sensitivity runs from 200 millivolts to 8 volts with a single gain control for the channel pair, and the input impedance is 10k ohms. An external level control is supported as an option.
The ARC Series heat sink is high-pressure die-cast aluminum with a rough-grain black anodized finish and CNC-machined accents. Cool air enters through vents at both ends, passes over the power supply switching devices and the output devices, and exhausts at the front edge. A variable-speed ball-bearing fan moves the air and an onboard micro-controller sets its speed, so the amplifier only makes fan noise when it is actually working. Mounting feet are integrated into the corners of the heat sink and plastic hex-head trim caps cover the fasteners.
The ARC 1000.2 carries Arc Audio's patent pending TAMB technology. If the amplifier's master clock and output switching frequency ever interferes with radio reception or a keyless entry system, or beats against another amplifier in the vehicle, the installer can shift the master clock frequency of the power supply and output circuits in the IPS 8.8 software suite over the micro-USB port. The same port handles top panel illumination color, strapping configuration, remote output delay timing and firmware updates.
Low-impedance filter chokes on the power connections stop power supply switching artifacts from radiating out of the power wires, and ultra-low ESR capacitors sit before and after the power supply.
The input stage is fully balanced and differential, which rejects common electrical noise and lets the amplifier connect to factory amplifier outputs as well as to RCA sources. Speaker level input adapter plugs attenuate a high-power factory signal down to a usable level. Dual remote turn-on detection covers both DC offset and signal sensing, and remote turn-on passes through to the next amplifier in the chain.
Mind the minimum load. The ARC 1000.2 is rated to 2 ohms in stereo and 4 ohms bridged. Do not take either channel below those limits. The output load switch must be set to match the connected load before the first power-up.
Every ARC Series amplifier accepts the eight-channel ARC Audio IPS 8.8 DSP module. Eight screws on the bottom of the chassis release the analog input board and the processor takes its place, bringing dual signal mixers, crossovers and signal delay under software control, 248 bands of equalization, up to four stored presets and compatibility with iDatalink Maestro AR replacement modules. The module is sold separately, so the amplifier can start as a straight two-channel and become a processed front end later without being replaced.
Installation summary: 15 3/8 x 6 3/8 x 2 1/4 in, Class D, 3 x 30A fusing on board, 8.0 to 17.1 volt operating range, balanced RCA or speaker-level inputs at 200 mV to 8V, 10k ohm input impedance, high-pass and low-pass 50 Hz to 500 Hz on channels 1 and 2, bass boost 0 to 12 dB at 45 Hz, variable-speed ball-bearing fan, USB-micro, onboard protection for thermal, under and over voltage, short and DC faults.
Audio Intensity is an authorized Arc Audio dealer. Every unit we sell is brand new current production with full manufacturer warranty coverage and lifetime tech support.
Audio Intensity ships the Arc Audio ARC 1000.2 fast from Tullahoma, Tennessee. Tell us what you are driving and at what impedance, and we will confirm whether stereo or bridged is the right way to wire it before you order.
Need more channels? The Arc Audio ARC 1000.6 shares this chassis with six channels at 175 watts each and is available with the IPS 8.8 DSP already installed. For a dedicated subwoofer amplifier, the Arc Audio X2 1100.1 delivers 1100 watts at 1 ohm.
| Arc Audio ARC 1000.2 Amplifier Specifications | |
|---|---|
| Power Output (at 14.4V) | |
| Stereo at 4 Ohms | 500 Watts RMS x 2 |
| Stereo at 2 Ohms | 600 Watts RMS x 2 |
| Bridged at 4 Ohms | 1,200 Watts RMS x 1 |
| Minimum Impedance | 2 Ohms stereo, 4 Ohms bridged |
| Bridgeable Speaker Outputs | Yes |
| Output Load Switch | Yes |
| Output Type | Class-D |
| Audio and Crossovers | |
| Frequency Response | 10 Hz to 30 kHz |
| Crossover Type, Channels 1 and 2 | Low-pass, high-pass, full range |
| Crossover Range, Channels 1 and 2 | 50 Hz to 500 Hz |
| Bandpass Crossovers | Not available |
| Bass Boost | 0 to +12 dB at 45 Hz |
| Inputs | |
| Input Channels (Analog) | 2 |
| Input Type | Balanced differential, RCA or speaker level |
| Input Sensitivity | 200 mV to 8V |
| Input Impedance | 10k Ohms |
| Input Gain Type | Analog control, one control per channel pair |
| Auto-Sense Turn-On | Yes, signal and DC (BTL), uses Ch 1/2 analog inputs only |
| Remote Turn-On Pass Through | Yes |
| Compatible External Level Control | Yes, optional |
| Processing | |
| DSP Equipped | No, accepts the optional ARC Audio IPS 8.8 module, sold separately |
| USB Connection Type | USB-Micro |
| IPS 8.8 Software Suite Controls | Top panel illumination color, strapping configuration, remote output delay timing, firmware updates, master clock frequency |
| Power, Cooling and Physical | |
| Fuse Rating | 3 x 30 Amp, on board |
| Amplifier Operating Voltage | 8.0V to 17.1V |
| Adjustable Class-D Switching Frequency | Yes, TAMB technology, patent pending |
| Cooling | Forced induction, variable-speed ball-bearing fan, micro-controller managed |
| Onboard Diagnostics | Thermal, under and over voltage, short and DC protection |
| Clip Warning Lights | No |
| Dimensions | 15 3/8 in (L) x 6 3/8 in (W) x 2 1/4 in (H) |
| Heat Sink | High-pressure die-cast aluminum, rough-grain black anodized with CNC-machined accents |
| UPC | 828863001435 |
| Warranty | Manufacturer warranty through authorized Arc Audio dealers |
See every Arc Audio subwoofer box and enclosure, each cut for a specific Arc Audio driver.