Arc Audio ARC 1000.2 two-channel Class D car amplifier, three-quarter view of the black ribbed heat sink with silver accent strips and chrome corner feet.
Arc Audio ARC 1000.2 two-channel Class D car amplifier, end view of the connection panel with the ARC 1000.2 badge, three 30 amp fuses, power and ground terminals, RCA inputs and gain controls.
Arc Audio ARC 1000.2 two-channel Class D car amplifier, three-quarter view of the black ribbed heat sink with silver accent strips and chrome corner feet.
Arc Audio ARC 1000.2 two-channel Class D car amplifier, end view of the connection panel with the ARC 1000.2 badge, three 30 amp fuses, power and ground terminals, RCA inputs and gain controls.

Arc Audio

Arc Audio ARC 1000.2 Two-Channel Amplifier | 500W x 2 | Class D

SKU: ARC 1000.2

$ 699.99 $ 1,069.99 Save $ 370.00
QUICK SPECS
  • Power (at 14.4V): 500W x 2 at 4 ohm | 600W x 2 at 2 ohm | 1,200W x 1 bridged at 4 ohm | 2 ohm min stereo, 4 ohm min bridged | Frequency response 10 Hz-30 kHz | Class D
  • Crossovers: Channels 1 and 2 low-pass, high-pass or full range, 50 Hz-500 Hz | bass boost 0 to +12 dB at 45 Hz | no bandpass section
  • Inputs: 2 analog input channels | balanced differential RCA or speaker level | sensitivity 200 mV-8V | 10k ohm | auto turn-on by signal and DC (BTL) | remote turn-on pass through | optional external level control
  • Physical: 15 3/8 x 6 3/8 x 2 1/4 in | 3 x 30A on-board fuses | 8.0-17.1V | variable-speed ball-bearing fan | USB-micro | TAMB adjustable switching frequency | accepts the optional IPS 8.8 DSP module
Arc Audio ARC 1000.2 two-channel Class D car amplifier, three-quarter view of the black ribbed heat sink with silver accent strips and chrome corner feet.

Arc Audio ARC 1000.2 Two-Channel Amplifier | 500W x 2 | Class D

Regular price $ 699.99
Sale price $ 699.99 Regular price $ 1,069.99
Unit price
Includes Shipping On orders to the lower 48
Full Warranty Factory Backed
Expert Support Real Installers
INSTALLER'S TAKE

This is the one to reach for when you want real power on two channels and you do not need six. Five hundred watts a side at 4 ohms is more than most component sets will take, and at 2 ohms it goes to 600. Bridged onto a 4 ohm subwoofer it makes 1,200 watts, which is simply the 2 ohm stereo rating recombined, so it is not a stretch for the amplifier.

Watch Arc's own numbers on this one. The product description on their site rounds the whole ARC Series to a thousand watts and describes the bridged channel as 1,000 watts. The published specification table says 1,200 watts at 4 ohms bridged, and that is the figure consistent with the 2 ohm stereo rating. We quote the specification table. Either way, set gains properly rather than trusting a printed number.

The crossover section is basic and that is fine for what this amplifier is. Low pass, high pass or full range on channels 1 and 2 across 50 to 500 Hz, plus a bass boost centered at 45 Hz. If you later need more than that, the amplifier accepts the IPS 8.8 DSP module. Eight screws on the bottom, the analog board comes out and the processor goes in. That is a genuinely useful upgrade path because you are not replacing the amplifier to get processing.

Set the output load switch before the first power-up, not after. Two ohms minimum in stereo, four ohms minimum bridged, and do not go under either.

It is a long amplifier at 15 and 3/8 inches, and the cooling pulls air in at both ends and pushes it out the front edge. Under a rear seat in a truck is fine. A tight false floor with both ends blocked is not. Leave it room and the variable speed fan stays quiet.

Product Details
Specifications
Related Products
FAQs
Product Details

Arc Audio ARC Series Amplifiers

Arc Audio ARC 1000.2 Two-Channel Amplifier

Five hundred watts per channel at 4 ohms, six hundred at 2 ohms, and 1,200 watts bridged into a single 4-ohm load. The ARC 1000.2 is the two-channel member of Robert Zeff's ARC Series: a high-pressure die-cast chassis with computer-managed forced induction cooling, balanced differential inputs, and an adjustable switching frequency that can be moved out of the way of a noise problem.

500W x 2 at 4 Ohm 600W x 2 at 2 Ohm 1,200W Bridged IPS 8.8 DSP Ready

Power Output

Stereo at 4 Ohms

500W x 2

Rated continuous

Stereo at 2 Ohms

600W x 2

Rated continuous

Bridged at 4 Ohms

1,200W

Single channel, subwoofer duty

Two channels of 500 watts is enough to run a serious set of components hard, and bridged into a single 4-ohm load the same amplifier delivers 1,200 watts to a subwoofer. The bridged figure is simply the 2-ohm stereo rating recombined, which is why the amplifier can do it without strain. Note that Arc Audio's product description rounds the series to a thousand watts; the published specification table is the figure quoted here.

Where It Sits in the Range

The ARC Series is built around three amplifiers that share one chassis, one heat sink and one cooling system, all producing roughly a thousand watts. The 1000.2 is the two-channel version, and it is the one to use when you want the most power per channel the platform offers. Run it on a component front stage, on a pair of midbass drivers in an active build, or bridged on a single subwoofer.

500W x 2at 4 Ohm
1,200WBridged 4 Ohm
10 Hz to 30 kHzFrequency Response
15 3/8 inLength

Crossovers and Controls

In its standard analog form the ARC 1000.2 carries a high-pass, low-pass and full-range crossover on channels 1 and 2 covering 50 Hz to 500 Hz, plus an adjustable bass boost from 0 to 12 dB centered at 45 Hz. Input sensitivity runs from 200 millivolts to 8 volts with a single gain control for the channel pair, and the input impedance is 10k ohms. An external level control is supported as an option.

Forced Induction Cooling

The ARC Series heat sink is high-pressure die-cast aluminum with a rough-grain black anodized finish and CNC-machined accents. Cool air enters through vents at both ends, passes over the power supply switching devices and the output devices, and exhausts at the front edge. A variable-speed ball-bearing fan moves the air and an onboard micro-controller sets its speed, so the amplifier only makes fan noise when it is actually working. Mounting feet are integrated into the corners of the heat sink and plastic hex-head trim caps cover the fasteners.

TAMB: Adjustable Switching Frequency

The ARC 1000.2 carries Arc Audio's patent pending TAMB technology. If the amplifier's master clock and output switching frequency ever interferes with radio reception or a keyless entry system, or beats against another amplifier in the vehicle, the installer can shift the master clock frequency of the power supply and output circuits in the IPS 8.8 software suite over the micro-USB port. The same port handles top panel illumination color, strapping configuration, remote output delay timing and firmware updates.

Low-impedance filter chokes on the power connections stop power supply switching artifacts from radiating out of the power wires, and ultra-low ESR capacitors sit before and after the power supply.

Balanced Inputs and OEM Integration

The input stage is fully balanced and differential, which rejects common electrical noise and lets the amplifier connect to factory amplifier outputs as well as to RCA sources. Speaker level input adapter plugs attenuate a high-power factory signal down to a usable level. Dual remote turn-on detection covers both DC offset and signal sensing, and remote turn-on passes through to the next amplifier in the chain.

Mind the minimum load. The ARC 1000.2 is rated to 2 ohms in stereo and 4 ohms bridged. Do not take either channel below those limits. The output load switch must be set to match the connected load before the first power-up.

Add the IPS 8.8 DSP Later

Every ARC Series amplifier accepts the eight-channel ARC Audio IPS 8.8 DSP module. Eight screws on the bottom of the chassis release the analog input board and the processor takes its place, bringing dual signal mixers, crossovers and signal delay under software control, 248 bands of equalization, up to four stored presets and compatibility with iDatalink Maestro AR replacement modules. The module is sold separately, so the amplifier can start as a straight two-channel and become a processed front end later without being replaced.

Installation summary: 15 3/8 x 6 3/8 x 2 1/4 in, Class D, 3 x 30A fusing on board, 8.0 to 17.1 volt operating range, balanced RCA or speaker-level inputs at 200 mV to 8V, 10k ohm input impedance, high-pass and low-pass 50 Hz to 500 Hz on channels 1 and 2, bass boost 0 to 12 dB at 45 Hz, variable-speed ball-bearing fan, USB-micro, onboard protection for thermal, under and over voltage, short and DC faults.

Built and Backed

Audio Intensity is an authorized Arc Audio dealer. Every unit we sell is brand new current production with full manufacturer warranty coverage and lifetime tech support.

Authorized Arc Audio Dealer

Audio Intensity ships the Arc Audio ARC 1000.2 fast from Tullahoma, Tennessee. Tell us what you are driving and at what impedance, and we will confirm whether stereo or bridged is the right way to wire it before you order.

Need more channels? The Arc Audio ARC 1000.6 shares this chassis with six channels at 175 watts each and is available with the IPS 8.8 DSP already installed. For a dedicated subwoofer amplifier, the Arc Audio X2 1100.1 delivers 1100 watts at 1 ohm.

Specifications
Arc Audio ARC 1000.2 Amplifier Specifications
Power Output (at 14.4V)
Stereo at 4 Ohms500 Watts RMS x 2
Stereo at 2 Ohms600 Watts RMS x 2
Bridged at 4 Ohms1,200 Watts RMS x 1
Minimum Impedance2 Ohms stereo, 4 Ohms bridged
Bridgeable Speaker OutputsYes
Output Load SwitchYes
Output TypeClass-D
Audio and Crossovers
Frequency Response10 Hz to 30 kHz
Crossover Type, Channels 1 and 2Low-pass, high-pass, full range
Crossover Range, Channels 1 and 250 Hz to 500 Hz
Bandpass CrossoversNot available
Bass Boost0 to +12 dB at 45 Hz
Inputs
Input Channels (Analog)2
Input TypeBalanced differential, RCA or speaker level
Input Sensitivity200 mV to 8V
Input Impedance10k Ohms
Input Gain TypeAnalog control, one control per channel pair
Auto-Sense Turn-OnYes, signal and DC (BTL), uses Ch 1/2 analog inputs only
Remote Turn-On Pass ThroughYes
Compatible External Level ControlYes, optional
Processing
DSP EquippedNo, accepts the optional ARC Audio IPS 8.8 module, sold separately
USB Connection TypeUSB-Micro
IPS 8.8 Software Suite ControlsTop panel illumination color, strapping configuration, remote output delay timing, firmware updates, master clock frequency
Power, Cooling and Physical
Fuse Rating3 x 30 Amp, on board
Amplifier Operating Voltage8.0V to 17.1V
Adjustable Class-D Switching FrequencyYes, TAMB technology, patent pending
CoolingForced induction, variable-speed ball-bearing fan, micro-controller managed
Onboard DiagnosticsThermal, under and over voltage, short and DC protection
Clip Warning LightsNo
Dimensions15 3/8 in (L) x 6 3/8 in (W) x 2 1/4 in (H)
Heat SinkHigh-pressure die-cast aluminum, rough-grain black anodized with CNC-machined accents
UPC828863001435
WarrantyManufacturer warranty through authorized Arc Audio dealers
Related Products
FAQs

Related Articles

Stylized car cabin with a subwoofer on the dashboard radiating light toward the seats

Demystifying Car Subwoofer Meaning

A car subwoofer is a specialized loudspeaker designed to reproduce low frequencies and enhance th...

Read Article →
Powering a Subwoofer RMS Matching and Gain title over an installer wiring an amplifier in a car boot

Powering a Subwoofer for Optimal Performance

Size the amp to the sub's RMS rating at 1.2 to 1.5x. A 500W RMS sub wants 600 to 750W of clean am...

Read Article →
Abstract neon render of subwoofer cones glowing red amid blue light trails

Ultimate Guide: Best Car Subwoofer Picks for Powerful Bass

Car subwoofers are essential for achieving high-quality bass and improving your overall listening...

Read Article →
Purple sports car on a neon-lit city street at night

Enhance Your Sound System with a Flat Subwoofer

Upgrade your sound system with a flat subwoofer for deeper, bass-enhanced audio quality. Choose f...

Read Article →