Driver-Matched for Helix

Helix Subwoofer Enclosures

Sealed cabinets cut to Helix's own published volumes, CNC built in Tullahoma, Tennessee.

Driver-Matched for Helix

Every enclosure on this page is cut for a specific Helix subwoofer. Audiotec Fischer publishes a recommended sealed volume for each driver in the IK W, IK S and IQ W ranges, and these cabinets are built to that figure rather than to a round number that happened to fit. That is the whole point of a driver-matched box: the alignment on the page is the alignment you get. Sizes run 8, 10 and 12 inch, single and dual, in rear-firing wedge and floor-firing down fire. The range also includes a ported cabinet shipped loaded with a Helix Precision P8.

36 driver-matched Helix enclosures in stock across three series, two chassis and three sizes, plus MATCH components and a loaded P8 cabinet.

Langboard Elite MDF, CNC cut and assembled in Tullahoma, Tennessee. 1-year limited warranty on Performance Optimized cabinets. Polyfill installed, terminal cup pre-wired, threaded inserts at every mounting point.

Alignments on this page are computed from Helix's own published Thiele-Small parameters and stated anechoic, before cabin gain.

Shop the Lineup

←
→

All products loaded

Mounting Depth, IK W Against IK S

8 inch: 3.98 in full depth, 3.13 in shallow. 10 inch: 4.96 in against 3.33 in. 12 inch: 5.67 in against 3.76 in. The shallow 12 is genuine shallow-mount depth, not a trimmed version of the full-size driver, and it is the one that decides most under-seat and behind-seat builds.

On Helix's Published F3

Every IK datasheet prints a lower limiting frequency equal to that model's own recommended DSP highpass corner, so it reads several hertz lower than the raw sealed response. The IQ sheets carry no filter recommendation and their figures reconcile with the anechoic math to about 2 Hz. Our product pages print the computed anechoic figure either way, and say which is which.

Three Series, Two Chassis, 8 to 12 Inch

IK W, the full-depth range, 12 cabinets from $249.99. Both coil versions share one cabinet per size and chassis, because built to the larger of the two published volumes the SVC2 and DVC2 land on almost the same alignment.

IK S, the shallow range, 12 cabinets from $249.99. Same volumes and the same prices as the W series at every size, on mounting depths of 3.13, 3.33 and 3.76 inches. Both coil versions share one recommended volume here, so one cabinet is unarguably right for both.

IQ W, the flagship range, 12 cabinets from $249.99 to $509.99. 750 watts RMS and 12 mm of travel, and the only range with the Tuning Mass System, so each listing carries several cabinets and you pick the one matching the weights you intend to run.

Also here: a ported 8 inch cabinet shipped loaded with a Helix Precision P8, the one product on this page that arrives with its driver already in it. Cabinets for other drivers are in the rest of the Performance Optimized series.

Helix Enclosure Questions

Is the Helix subwoofer included with the enclosure?

No. These are enclosures only, built to fit a named Helix driver that you buy separately. You receive the cabinet finished in plush black carpet with threaded inserts at every mounting point, stainless machine screws, a pre-wired side-mounted terminal cup and the polyfill lining already installed. The one exception on this page is the ported 8 inch cabinet, which ships loaded with a Helix Precision P8.

What is the difference between the IK W and IK S series?

Depth. The S is the shallow half of the IK range and mounts in 3.13, 3.33 and 3.76 inches at 8, 10 and 12 inch against 3.98, 4.96 and 5.67 for the W. Power handling and cone area are the same, and at each size both series take the same recommended sealed volume, so the enclosures are the same price. Pick the S when the space will not take the W.

What is the Tuning Mass System on the IQ series?

Helix supplies bolt-on weights for the IQ cone assembly. Each weight raises moving mass, which lowers free-air resonance and raises the driver's total Q, so Helix publishes a different recommended sealed volume for every setting. Each IQ listing therefore carries several different cabinets and you choose the one matching the weights you intend to run. The cabinet is cut to that setting, so order the setting you will actually use.

Should I choose a wedge or a down fire?

A wedge leans against the rear seat back and fires rearward into the trunk, which suits a sedan and keeps the space in front of it usable. A down fire sits flat on the cargo floor with the cone facing down, which works in a truck or an SUV, anywhere the load floor has to stay flat, and anywhere there is no seat back to lean a wedge against. Both hold the same airspace at a given size, so the choice is about the vehicle, not the sound.

Why does your half-power figure differ from the Helix datasheet?

On the IK series it differs because the two are different measurements. Helix quotes its lower limiting frequency with that model's own recommended DSP highpass applied, and a filter at that corner lifts the response enough to move the half-power point down to meet it. Ours is the raw anechoic response of the cabinet. On the IQ series there is no filter recommendation and the two figures agree to about 2 Hz.

Drivers Built to Match

Subwoofers Spec'd for These Enclosures

The drivers below are matched to the enclosures above by Thiele-Small parameters. Buying together guarantees the alignment, port tuning, and damping work the way the engineering intended.

Image Dynamics ID8 V4 8inch Subwoofer

Image Dynamics

Image Dynamics ID8 V4 8inch Subwoofer

$ 99.99
Prodigy Audio 8 inch Subwoofer NB2 Series - Prodigy Subwoofer for car audio systems

Prodigy Audio

Prodigy Audio 8 inch Subwoofer | NB2 Series

$ 108.99 $ 115.99
Prodigy Audio 10 inch Subwoofer NB2 Series - Prodigy Subwoofer for car audio systems

Prodigy Audio

Prodigy Audio 10 inch Subwoofer | NB2 Series

$ 138.99 $ 145.99
Image Dynamics ID10 V4 10-inch Subwoofer

Image Dynamics

Image Dynamics ID10 V4 10-inch Subwoofer

$ 139.99

View all car subwoofers | Need a custom build? Contact us

Last updated November 5, 2026