What does Micro Series mean and how does it differ from a standard Proline X enclosure?

The Micro Series uses a reduced external footprint compared to standard Proline X enclosures built for the same driver size. The internal volume is still tuned to a sealed alignment, but the outer cabinet dimensions are optimized to fit installs where a full-depth box will not clear the available space. This applies to narrow trunk floors, under-seat locations, and custom builds with strict dimensional limits. Polyfill is included in every enclosure to offset the acoustic effect of the reduced internal volume.

Are these sealed or ported enclosures and what should I expect from a sealed alignment?

These are sealed Arc Audio subwoofer enclosures — there is no port or vent. A sealed box produces tight transient response and a gradual low-frequency rolloff, which is easier to integrate with an amplifier's subwoofer channel than a sharply tuned ported design. Sealed enclosures generally require more amplifier power to match the output of an equivalent ported box, but they are more forgiving across a wider range of amplifier gain and crossover settings. The polyfill pre-loaded in each cabinet increases the effective internal volume, which extends usable low-frequency output from the compact enclosure.

Which Arc Audio driver sizes and configurations are supported?

The Proline X Micro Series sealed enclosures support 8-inch, 10-inch, and 12-inch Arc Audio subwoofers in both single and dual woofer configurations. The double mounting face accommodates all three driver sizes, and the recessed baffle keeps each driver flush regardless of diameter. Always verify that your Arc Audio driver's recommended sealed enclosure volume matches the internal volume of the box before ordering — using an enclosure that is outside the driver's optimal sealed range will affect frequency response and output. Dual configurations require two drivers of matching size and impedance.

How does the threaded insert mounting system work and are screws included?

Woofer mounting uses 8/32 machine screws threaded into pre-installed inserts in the baffle. The machine screws are included with the enclosure. Threaded inserts provide a more durable mounting point than wood screws driven directly into MDF — they hold torque consistently and do not strip when a driver is removed and reinstalled. The recessed woofer cutout positions the driver flush with the baffle and keeps the surround clear of the cabinet edge during mounting. No additional hardware is required.

What is Stack Fab construction and how does it affect enclosure performance?

Stack Fab is a construction method where MDF layers are stacked and bonded under pressure to form a single dense wall panel. The resulting structure is more rigid and consistent than standard single-sheet MDF of the same nominal thickness. In a sealed subwoofer enclosure, rigid walls maintain the tuned internal volume under repeated pressure cycles from driver excursion — panel flex changes the effective volume and introduces resonance that colors the output. Stack Fab is used across the Proline X lineup as the standard construction method where wall rigidity and dimensional accuracy are both required.

Subwoofer enclosure banner image with sub enclosures from proline x

Proline X Micro Series Subwoofer Boxes | Arc Audio

The Proline X Micro Series sealed Arc Audio subwoofer enclosures are built for installs where available space is limited but driver performance requirements remain the same. These boxes use a reduced external footprint to fit trunk floors, under-seat locations, and custom cavities where a standard-depth sealed enclosure will not clear the space.

Cabinet construction uses Stack Fab — layers of MDF bonded under pressure into a single dense wall panel that resists flex under sustained driver excursion. The double mounting face accepts 8-inch, 10-inch, and 12-inch Arc Audio subwoofers in single and dual configurations. The recessed woofer cutout positions the driver flush with the baffle. Mounting uses 8/32 machine screws into pre-installed threaded inserts, which are included. The in-house Advanced Terminal Cup is built from ABS and carbon fiber with stainless steel hardware and is prewired from the factory.

Each enclosure ships with rubber feet and polyfill pre-loaded in the cabinet. No internal wiring or bench prep is required before install.

Tuning Frequency Sealed / Tight

Material High-Density MDF

Power Rating Small Footprint

Ideal For Space Saving

←

→

All products loaded

}

Built Different. Built Better.

Every Proline X enclosure is manufactured in our Tullahoma, Tennessee facility using materials and construction methods that most enclosure brands don't touch.

Langboard Elite MDF

48.5 lb/ft³ density and 200 psi internal bond strength, the highest-grade MDF available for enclosure construction.

1-Year Warranty

Full coverage on materials and construction defects. We stand behind every enclosure we build.

Driver-Matched Tuning

Internal volume, port tuning, and cabinet dimensions are spec'd to each driver diameter, not a universal fit applied across sizes.

Made in Tullahoma, TN

CNC-manufactured in our Tennessee facility on ShopSabre routers. Not imported. Not outsourced.

Proline X Micro Series sealed Arc Audio subwoofer boxes compact footprint

What the Proline X Micro Series is

The Proline X Micro Series is a line of sealed subwoofer enclosures engineered around a compact external footprint. They are intended for vehicle installs where standard enclosure depth or width will not fit the available space. This series covers 8-inch, 10-inch, and 12-inch Arc Audio subwoofers in single and dual woofer configurations. Within the Proline X lineup, the Micro Series addresses the space constraint problem directly without reducing the build standard applied to the rest of the range.

Sealed enclosure alignment

These are sealed enclosures — the driver operates in a fully enclosed air volume with no port or vent. A sealed alignment produces tight, controlled transient response and a gradual low-frequency rolloff that integrates consistently with most amplifier subwoofer channels. Polyfill is pre-loaded in each cabinet to increase the effective acoustic volume, allowing the compact box to behave closer to a larger sealed enclosure. This offsets the acoustic penalty that typically comes with reducing external cabinet dimensions.

Stack Fab cabinet construction

Each cabinet is built using Stack Fab construction — MDF layers bonded together under pressure to form a single dense wall panel. This method produces consistent wall thickness and high rigidity across all cabinet surfaces. A rigid wall structure reduces panel resonance, which keeps the internal volume acoustically stable under repeated pressure cycles from driver excursion and sustained power. Stack Fab is used across the Proline X lineup where structural consistency and dimensional accuracy are required.

Driver sizing and woofer mounting

The double mounting face supports 8-inch, 10-inch, and 12-inch Arc Audio subwoofers in single and dual configurations. The woofer sits in a recessed cutout flush with the baffle surface, which protects the surround during handling and reduces install depth. Mounting uses 8/32 machine screws into pre-installed threaded inserts — the screws are included. Threaded inserts allow the driver to be removed and reinstalled without degrading the mounting points, unlike wood screws which can strip MDF over repeated use.

Terminal cup and internal wiring

The Proline X Advanced Terminal Cup is built in-house from ABS and carbon fiber with stainless steel hardware. Internal wiring from the terminal cup is completed at the factory, so no wiring is required inside the cabinet at install. The stainless steel hardware resists corrosion across the temperature and humidity cycles typical in vehicle environments. The ABS and carbon fiber construction keeps the cup rigid and low mass without adding unnecessary weight to the cabinet.

Inclusions and install readiness

Each Proline X Micro Series enclosure ships with rubber feet, polyfill pre-loaded in the cabinet, prewiring from the terminal cup, and 8/32 machine screws for driver mounting. At install, the only steps required are mounting the driver, connecting the terminal cup to the amplifier, and securing the box in position. No bench prep, internal wiring, or additional hardware sourcing is needed. This reflects the build standard Audio Intensity applies across the Proline X series.