Ultimate Guide to Dual Subwoofer Setups for Car Audio
By adding two subwoofers to your car audio system, you can really boost the sound quality and bas...
Read Article →Stereo Integrity
SKU: SI-HST15-D1
Stereo Integrity
HST-15
15 Inch High-Excursion Subwoofer | Sold Individually
The HST-15 brings the Stereo Integrity HST series design to a 15 inch cone. The series is built for very large bass output from very small enclosures, and it gets there through stroke and motor force rather than cone size. The bifilar copper voice coil is capable of 40 mm of one-way linear travel, for 80 mm of total linear travel and 102 mm of total peak excursion.
Each HST-15 is hand-built by Stereo Integrity in North Carolina. For enclosure modeling, Stereo Integrity specifies a driver displacement of 0.45 cubic feet.
A large triple stacked motor with three shorting rings provides the force to control a cone moving this far, which is why the motor is so tall relative to the basket.
The bifilar copper coil delivers 40 mm of one-way linear travel, with the shorting rings working to hold inductance down across the stroke.
A wide soft foam surround and a three layer, 10 inch natural Nomex spider keep compliance flat and linear, and sewn-on flat voice coil leads eliminate lead tap.
The carbon fiber sandwich cone and dust cap keep cone stiffness very high, mounted in a high-clearance cast aluminum frame with large 4 AWG push terminals.
The HST-15 is available in dual 1 ohm and dual 2 ohm. Wire dual 1 ohm coils to 0.5 ohm in parallel or 2 ohms in series, and dual 2 ohm coils to 1 ohm in parallel or 4 ohms in series.
Planning note: Beyond the 0.45 cubic foot displacement, Stereo Integrity's product page does not list a Thiele-Small parameter set, power rating, or mounting dimensions for the HST-15. The Klippel report in the gallery shows its measured force factor and suspension stiffness curves. Call us before you plan an enclosure and we will help with the details.
Each HST-15 is hand-built to order and ships separately. Stereo Integrity lists a 90 pound shipping weight, so call 931-563-5151 before you order for current lead time and delivery options.
Audio Intensity is an authorized Stereo Integrity dealer, and we build enclosures around their drivers.
Call 931-563-5151 to plan an HST-15 build.
| Specifications | |
|---|---|
| Model | HST-15 |
| Size | 15 in |
| Voice Coil Options | Dual 1 ohm or dual 2 ohm |
| Voice Coil | Bifilar copper |
| Motor | 250 mm triple stacked, three shorting rings |
| Spider | Three layer, 10 in natural Nomex with sewn-on flat leads |
| Surround | Wide soft foam |
| Cone | Carbon fiber sandwich cone and dust cap |
| Frame | High-clearance cast aluminum |
| Terminals | Large 4 AWG push |
| Driver Displacement | 0.45 cu ft |
| Listed Shipping Weight | 90 lb |
| Published Excursion | |
| Linear Excursion (Xmax) | 40 mm one-way |
| Total Linear Travel | 80 mm |
| Total Peak Excursion | 102 mm |
| Figures as published by Stereo Integrity, which does not list a Thiele-Small parameter set, power rating, or mounting dimensions for the HST-15. | |
See every Stereo Integrity subwoofer box and enclosure, each cut for a specific Stereo Integrity driver.
No video available for this product yet.
Check back soon, or reach out and we'll walk you through it: 931-563-5151