What are the Best Car Speakers for Sound Quality
Are you tired of listening to low-quality music on your car stereo? Upgrading your car audio syst...
Read Article →Karma
SKU: Allure XO
Karma Mobile Audio Allure Crossover
Allure Series Passive 2-Way Crossover | Sold as a Matched Pair
The Karma Mobile Audio Allure Crossover is the matched passive network that turns the Allure 6 Midbass and Allure 1 Tweeter into a complete, tuned 2-way front stage. It is sold as a matched pair, one per side.
If you are not running a DSP, this is the piece that does the work for you. It sets the handoff between the midbass and the tweeter at the Allure 1's designed 2,500 Hz crossover point, and it lets you dial tweeter level with simple jumpers. No processor, no soldering, no guesswork.
Everything here is aimed at a clean passive install with enough flexibility to tune the stage to your car and your taste.
Run a single amplifier channel passive, or feed the midbass and tweeter sections separately to bi-amp the set. The choice is yours as your system grows.
Set tweeter level with jumpers instead of fragile switches. It is a cleaner, more reliable way to balance the top end to your install.
Voiced specifically for the Allure 6 Midbass and Allure 1 Tweeter, so the two drivers blend the way the designer intended.
A clean passive network gets a great front stage playing without a processor, the fastest path from box to music.
The Allure Crossover is for passive and bi-amp installs. If you run a full active setup with a DSP, your processor handles the crossover instead and you would not use this network.
The Allure 1 is 90 dB sensitive and the Allure 6 is 87 dB, so the tweeter is about 3 dB hotter out of the box. Start with roughly 3 dB of tweeter attenuation on the jumpers, listen, then fine-tune until the top end blends with the midbass. Most cars settle in within a step or two of that starting point.
For a single-amp passive install, run one amplifier channel into the crossover input on each side and let the network split to the midbass and tweeter. To bi-amp, feed the midbass and tweeter sections from separate amplifier channels for more headroom and control.
Mount each crossover in a dry, accessible spot, behind a kick panel, under a seat, or in the door cavity away from moisture. Keep the runs to the midbass and tweeter as short and tidy as practical.
Build the full Allure front stageOne amplifier channel per side into the crossover, which splits to the Karma Mobile Audio Allure 6 Midbass and Allure 1 Tweeter.
Separate amplifier channels feed the midbass and tweeter sections for more headroom and finer control.
Designed around the Karma Mobile Audio Allure 6 Midbass for a seamless low-to-mid handoff.
Sets the Karma Mobile Audio Allure 1 Tweeter at its recommended 2,500 Hz crossover point.
Every Karma Mobile Audio Allure Crossover from Audio Intensity is backed by setup help from a working SQ judge.
Tell us your vehicle and your amplifier and we will map out the cleanest way to wire and tune your Allure set. Built on sound quality first.
No video available for this product yet.
Check back soon, or reach out and we'll walk you through it: 707-999-3071