Best 15 Inch Subwoofer (2026): Power, Box Size and Value
Three widely sold 15-inch subwoofers compared on watts per dollar, sensitivity, and the box each ...
Read Article →Arc Audio
SKU: MOTO 720 Demo
Arc Audio MOTO Series | Previous Demo Unit
The amplifier that carried Arc Audio's powersports line before the MOTO 800, offered here as a previous demo unit. Four channels of 150 watts at 4 ohms in an ultra-compact chassis built to live inside a fairing, and it ships with the RCA input harness.
Stereo at 4 Ohms
150W x 4
All four channels
Stereo at 2 Ohms
180W x 4
All four channels, 720W total
Bridged at 4 Ohms
360W x 2
Two bridged channels
The 720 in the name is where the four channels land at 2 ohms: 180 watts each, 720 watts total. That is also why the bridged figure is 360 watts a pair, because bridging into a 4 ohm speaker asks each channel to drive the equivalent of 2 ohms. Four channels of 150 watts at 4 ohms runs a full fairing set plus saddlebag speakers, and bridging one pair gives a subwoofer 360 watts without adding a second amplifier.
The MOTO 720 uses a microprocessor-controlled Class D output stage and holds 94 percent overall efficiency with low EMI and RFI emissions, which is what keeps it out of the radio and the keyless entry on a bike. Arc Audio has since replaced it with the MOTO 800, which moved to a Class G/H output stage and lifted the ratings to 180 watts at 4 ohms. Both share the same ultra-compact chassis footprint, so if the 720 fits your install the 800 will too. The 720 is the better buy when the lower price matters more than the last 30 watts a channel.
A Load Select switch sits beside each speaker connection plug, silkscreened on the end panel for 4 ohm stereo, 2 ohm stereo and 4 ohm bridged, with a minimum bridged load of 4 ohms. It lets the installer match power delivery to what is actually connected, which matters when one pair runs full-range speakers at 4 ohms and the other drives a bridged subwoofer. Each input pair also has its own RCA or speaker-level switch on the same panel.
Each pair of channels has a defeatable high-pass and low-pass crossover adjustable across roughly the 50 Hz to 500 Hz range. Set a pair to full range for fairing speakers, or low-pass a bridged pair for a subwoofer. The high-pass is also the right tool for protecting high-efficiency coaxials like the MOTO CX6, MOTO CX69 or MOTO602-HD.
Signal comes in through the quick-connect plugs Arc Audio has used for speaker-level inputs for decades, compatible with MPAK wiring kits and the PSM digital signal processor. The RCA input dongle harness that plugs into those connectors is included with this demo unit, which is worth knowing because it is a separate purchase otherwise. Input level switches on the end panel flip each pair between RCA and speaker level, and sensitivity adjusts from 200 mV to 4V in low-level mode and 600 mV to 14.0V in high-level mode. Auto turn-on means the amplifier can be integrated without a remote lead from the head unit.
Arc Audio is direct about this and so are we: the MOTO 720 is not a waterproof amplifier. What it has is two conformal coating layers on the main circuit board and treated, PP-coated internal components, which is a design built to survive high humidity and getting caught in the rain on a ride. That is the real-world case for a motorcycle amplifier. It is not a reason to pressure wash it.
Tuning lives under the top panel. The sensitivity and crossover adjustments sit beneath the machined aluminum top plate, which also keeps water off the switches. Set the amplifier up before it goes deep into a fairing or under a dash, because getting back to the controls means pulling that panel again.
A built-in fan keeps the amplifier cool at volume in hot weather, and the microprocessor stores the last protection code it triggered, so a fault can be read back during troubleshooting instead of guessed at. On a bike where the amplifier is buried behind bodywork, that saves real time. A Power/Protect indicator sits on the end panel next to the turn-on terminal.
Installation summary: 8.125 x 5.43 x 1.8 in, microprocessor Class D, internally fused 2 x 30A, power and ground terminal blocks with a dedicated remote turn-on terminal, four inputs accepting RCA or speaker level with a switch per pair, defeatable high-pass and low-pass per channel pair, Load Select per pair for 4 ohm stereo, 2 ohm stereo or 4 ohm bridged, internal cooling fan, stored fault-code diagnostics.
Arc Audio built the MOTO category around motorcycle fairings, but at 8.125 by 5.43 inches a lot of installers use this chassis under the seat in exotic cars, behind the seat in trucks and in side-by-sides. It suits motorcycle, marine, powersports and automotive installs equally well.
Audio Intensity ships from Tullahoma, Tennessee. Tell us what you are riding or driving, the speakers you are running and their impedance, and we will confirm the channel assignment and crossover plan before you order. Ask us about this demo unit's exact condition and what ships with it.
Pair it with Arc Audio powersports speakers: the MOTO CX69 6x9 set is built for the same fairing and saddlebag duty. Need a processor in the chain? The MOTO 720 connects to the PSM-Pro using the same quick-connect plugs.
| ARC Audio MOTO 720 Amplifier Specifications | |
|---|---|
| Condition | |
| Unit Condition | Previous demo. Perfect working condition, excellent cosmetics with minor signs of use. Original box not included. |
| Included With This Unit | RCA input dongle harness, pictured with the amplifier |
| Warranty | 90-day warranty from your date of purchase |
| Power Output | |
| Total Amplified Output Channels | 4 |
| Stereo at 4 Ohms | 150 Watts RMS x 4 |
| Stereo at 2 Ohms | 180 Watts RMS x 4 |
| Bridged at 4 Ohms | 360 Watts RMS x 2 |
| Minimum Bridged Load | 4 ohms, marked on the end panel |
| Load Select Switch | Yes, one per channel pair: 4 ohm stereo, 2 ohm stereo or 4 ohm bridged |
| Output Type | Microprocessor-controlled Class D |
| Efficiency | 94 percent |
| Audio and Crossovers | |
| Frequency Response | 10 Hz to 20 kHz |
| S/N Ratio | Not published by Arc Audio for this model |
| Crossover Type, Ch 1/2 and Ch 3/4 | Defeatable high-pass and low-pass, independent per channel pair |
| Crossover Range | Approximately 50 Hz to 500 Hz (one dealer sheet lists the top of the range as 550 Hz) |
| Inputs | |
| Input Channels | 4 |
| Input Type | RCA or speaker level, selected by a switch per channel pair on the end panel |
| Input Sensitivity | 200 mV to 4V low level, 600 mV to 14.0V high level |
| Signal Connectors | Arc Audio quick-connect plugs, compatible with MPAK kits and the PSM processor |
| RCA Input Harness | Included with this demo unit |
| Auto Turn-On | Yes |
| Power, Cooling and Physical | |
| Fuse Rating | Internally fused, 2 x 30 Amp (marked on the chassis end panel) |
| Power and Ground Connections | Terminal blocks with a dedicated remote turn-on terminal |
| Cooling | Built-in internal fan |
| Onboard Diagnostics | Stores the last protection fault code for troubleshooting, with a Power/Protect indicator on the end panel |
| Water Resistance | Not waterproof. Dual conformal coating on the circuit board and PP-coated internal components |
| Dimensions | 8.125 in (L) x 5.43 in (W) x 1.8 in (H) |
| Where These Figures Come From | |
| Specification Source | Arc Audio has retired its MOTO 720 product page, so these figures come from the owner's manual, Arc dealer specification sheets and the markings on this unit's own chassis rather than from a current Arc Audio page. The fusing, Load Select options and minimum bridged load are read directly from the end panel photo on this listing. |
See every Arc Audio subwoofer box and enclosure, each cut for a specific Arc Audio driver.