Arc Audio Cu 4.4 4-channel Class A/B amplifier, brushed copper and satin silver chassis|Arc Audio|Audio Intensity
Arc Audio Cu 4.4 copper top plate detail with engraved ARC Audio logo and Cu 4.4 badge|Arc Audio|Audio Intensity
Arc Audio Cu 4.4 4-channel Class A/B amplifier, brushed copper and satin silver chassis|Arc Audio|Audio Intensity
Arc Audio Cu 4.4 copper top plate detail with engraved ARC Audio logo and Cu 4.4 badge|Arc Audio|Audio Intensity

Arc Audio

Arc Audio Copper 4.4 Amplifier

SKU: Cu 4.4

$ 1,799.99
QUICK SPECS
  • Power: 110W x 4 at 4 ohm | 175W x 4 at 2 ohm | 350W x 2 bridged at 4 ohm | Class A/B, multi-rail supply, not Class D
  • Audio: 10 Hz-75 kHz | S/N -84 dB at 1W, -105 dB at full power | ULF ultra-low feedback circuit | TTB thermal tracking bias
  • Crossovers and inputs: HP / LP / bypass per channel pair, 12 dB Linkwitz-Riley, 55-550 Hz with a x10 multiplier to 5.5 kHz | bass boost 0-15 dB at 45 Hz front only | balanced or single-ended, RCA or speaker level | 200 mV-4V into 10k ohms
  • Physical: 11 x 8.65 x 2.65 in | internally fused 3 x 30A | 8V-17.1V | variable-speed ball-bearing fan | brushed copper and satin silver chassis with gold-plated terminals
Arc Audio Cu 4.4 4-channel Class A/B amplifier, brushed copper and satin silver chassis|Arc Audio|Audio Intensity

Arc Audio Copper 4.4 Amplifier

Regular price $ 1,799.99
Sale price $ 1,799.99 Regular price
Unit price
Includes Shipping On orders to the lower 48
Full Warranty Factory Backed
Expert Support Real Installers
INSTALLER'S TAKE

The Cu 4.4 is the one Arc amplifier in the line where the answer to "how many watts per dollar" is beside the point. It is a Class A/B design on a multi-rail supply, and that single fact explains the chassis size, the fan, the current draw and the price. If you are cross-shopping it against an X2 450.4 on wattage you are comparing two different arguments.

Power is 110 watts a channel at 4 ohms, 175 at 2 ohms, and 350 bridged into 4 ohms per pair. Arc's own specification tab is the source for every number in the table above, including the one people get wrong: the Output Type row reads Class A/B (Multi-Rail Supply). Listings that call this a Class D amplifier are copying from the wrong model.

Two things in the design are worth understanding before you buy. ULF, Arc's ultra-low feedback topology, keeps distortion down without heavy corrective feedback. TTB, thermal tracking bias, moves the bias point as the amplifier heats rather than holding a fixed value, which is what keeps the tonal character stable between a cold start and the end of a long drive.

The crossover bypass is the feature I would actually build around. Set it to bypass and the amplifier contributes no filtering at all, which is exactly what you want behind a Pro-Series DSP. When you do use the onboard crossovers, note the x10 multiplier: the same 55-550 Hz control becomes 550 Hz to 5.5 kHz, which is what makes an active tweeter and midrange pair practical on one amplifier.

Plan the electrical side properly. Internally fused at 3 x 30 Amp and rated 8V to 17.1V, a Class A/B amplifier at this output pulls meaningfully more current than a switching amplifier of the same rating. Size the wire, the fuse and the charging system for what it really draws, not for a Class D equivalent, and give the fan somewhere to breathe.

Two of them, one per side, is a configuration serious installers use deliberately: no shared supply or ground between left and right, which is why the balanced input option is there. If that is your plan, tell us and we will work through the gain structure with you.

One honest note. Arc lists Idle Current as TBD on their own spec sheet, so we do not publish a figure for it. If you need that number for a current budget, ask and we will get it from Arc rather than estimate it.

Product Details
Specifications
Related Products
FAQs
Product Details

Arc Audio Copper Series | Reference Class A/B

ARC Audio Cu 4.4 4-Channel Amplifier

Arc Audio's flagship. A four-channel reference amplifier with a genuine Class A/B output stage on a multi-rail supply, housed in brushed copper and satin silver. Built for the system where the amplifier is supposed to disappear and leave the music alone.

110W x 4 at 4 Ohm 350W x 2 Bridged Class A/B -105 dB S/N

Why This One Is Different

  • It is not Class D. The Cu 4.4 runs a Class A/B output stage fed by a multi-rail supply, which is the whole reason the chassis is this size and this price.
  • ULF, Ultra-Low Feedback circuit design, to hold distortion down without leaning on large amounts of corrective feedback.
  • TTB, Thermal Tracking Bias, which adapts bias to the amplifier's thermal conditions in real time instead of running a fixed bias point.
  • A true crossover bypass, so the amplifier gets out of the way entirely when a DSP is doing the filtering.

Power Output

Stereo at 4 Ohms

110W x 4

All four channels

Stereo at 2 Ohms

175W x 4

All four channels

Bridged at 4 Ohms

350W x 2

Two bridged channels

Those are honest Class A/B numbers, and they behave differently under load than the same figures from a switching amplifier. One Cu 4.4 runs a front stage actively, or a full set of components with a bridged pair on midbass. Arc also builds the three-channel case directly into the design: tweeter and midrange on two channels, midbass on the bridged pair.

Running Two of Them

Competition and high-end installers often use a pair of Cu 4.4s rather than one larger amplifier, one per side, so the left and right channels never share a power supply or a ground path. That is the configuration the amplifier was designed around, and it is the reason the input section offers balanced as well as single-ended connection.

-105 dBS/N at Full Power
10 Hz-75 kHzFrequency Response
Class A/BMulti-Rail Supply
3 x 30AInternal Fusing

Inputs and Crossovers

Inputs are balanced or single-ended, switchable between RCA and speaker level, 200 mV to 4V sensitivity into a 10k ohm load, with one gain control per channel pair. Each pair has a high-pass, low-pass or bypass crossover at 12 dB per octave Linkwitz-Riley, adjustable from 55 Hz to 550 Hz, and a x10 multiplier takes that same control up to 550 Hz to 5.5 kHz for active tweeter and midrange work. Bass boost is available on the front channels, 0 to 15 dB at 45 Hz.

The frequency response is published at 10 Hz to 75 kHz, which is well beyond the audio band on both ends and is the kind of figure a reference amplifier is measured on rather than sold on. Signal to noise is -84 dB at 1 watt and -105 dB at full power.

Plan your power delivery. This amplifier is internally fused at 3 x 30 Amp and operates from 8V to 17.1V. A Class A/B design draws meaningfully more current than a switching amplifier at the same output, so size the wire, the fuse and the charging system for the real load, not for a Class D equivalent.

Cooling and Protection

A variable-speed ball-bearing fan handles the thermal load, which is what lets a Class A/B amplifier of this output sit in a trunk or under a seat. Onboard diagnostics cover thermal, under and over voltage, short circuit and DC fault conditions. Auto-sense turn-on is available by DC detect.

Installation summary: 11 x 8.65 x 2.65 in, Class A/B multi-rail, internally fused 3 x 30A, 8V to 17.1V operating range, 2 or 4 analog input channels selectable, balanced or single-ended with an RCA / speaker level switch, 10k ohm input impedance, 200 mV to 4V sensitivity, 12 dB Linkwitz-Riley high-pass / low-pass / bypass per channel pair with a x10 range multiplier, 0-15 dB bass boost at 45 Hz on the front channels, variable-speed ball-bearing fan.

Where It Fits

This is a build-your-best-system amplifier. It belongs in front of a serious set of components, fed by a Pro-Series DSP or another high-resolution source, in an install where someone cares how the stage images. If you want maximum watts per dollar or per inch, the X2 and Blackbird Class D amplifiers are the better value and we will tell you so.

Free Shipping to the Lower 48 States

Questions Before You Buy?

Audio Intensity is an authorized Arc Audio dealer shipping from Tullahoma, Tennessee. Tell us the speakers you are running, their impedance and whether a DSP is in the chain, and we will confirm the channel assignment, the crossover plan and the current draw before you order.

The Cu 4.4 is designed to sit behind a processor. Ask us about pairing it with an Arc Audio Pro-Series DSP, and about the Cu 4.2 and Cu 6.2 if you need a different channel count in the same Copper Series chassis family.

Specifications
ARC Audio Cu 4.4 Amplifier Specifications
Power Output
Total Amplified Output Channels4
Stereo at 4 Ohms110 Watts RMS x 4
Stereo at 2 Ohms175 Watts RMS x 4
Bridgeable Speaker OutputsYes
Bridged at 4 Ohms350 Watts RMS x 2
Output TypeClass A/B with a multi-rail supply
Output Load SwitchNot available
Audio and Crossovers
Frequency Response10 Hz to 75 kHz
S/N Ratio at 1 Watt-84 dB
S/N Ratio at Full Power-105 dB
Crossover Type, Ch 1/2 and Ch 3/4High-pass, low-pass or bypass, 12 dB Linkwitz-Riley
Crossover Range, Ch 1/2 and Ch 3/455 Hz to 550 Hz, with a x10 multiplier giving 550 Hz to 5.5 kHz
Crossover and Front-End BypassYes
Bass Boost0 to 15 dB at 45 Hz, front channels only
Bandpass CrossoversNot available
Inputs
Input Channels (Analog)2 or 4, selectable
Input TypeBalanced or single-ended, RCA or speaker level selected by switch
Input Sensitivity200 mV to 4V
Input Impedance10k ohms
Input Gain TypeAnalog control, one per pair of channels (L/R)
Auto-Sense Turn-OnYes, DC detect only
Compatible External Level ControlYes, when using the onboard crossover in low-pass mode
Power, Cooling and Physical
Fuse RatingInternally fused, 3 x 30 Amp
Operating Voltage Range8V to 17.1V
CoolingVariable-speed ball-bearing fan
Onboard DiagnosticsThermal, under and over voltage, short circuit and DC fault protection
Dimensions11 in (L) x 8.65 in (W) x 2.65 in (H)
Idle CurrentNot published by Arc Audio (their table lists it as TBD)
Dealer and Warranty
ConditionBrand new
WarrantyArc Audio 1-year warranty, purchased from an authorized dealer
Arc Audio SKU82886300197
Related Products
FAQs

Related Articles

Subwoofer Placement in Classic Cars title over a subwoofer box fitted in a classic car's boot

Subwoofer Placement in Classic Cars: The Ultimate Guide

A classic car has no factory sub location and often thin, undeadened metal, so placement and moun...

Read Article →
Subwoofer Power Handling RMS and Matching title over a subwoofer wired to an amplifier and multimeter

Car Subwoofer Power Handling: RMS, Matching, and What Blo...

RMS is continuous power; peak or max is a marketing number you should ignore. Underpowering does ...

Read Article →
Dual 12-inch ported subwoofer box in a car boot with an amplifier and power cable alongside

Ultimate Guide to Dual Subwoofer Setups for Car Audio

By adding two subwoofers to your car audio system, you can really boost the sound quality and bas...

Read Article →
Stylized car interior with a glowing subwoofer in the door panel and colored light trails

Car Subwoofer Placement: Optimal Positions for Maximum Bass

Putting a subwoofer in the right spot in your car is really important for the best sound and bass...

Read Article →