Arc Audio ARC 1000.6 six-channel Class D car amplifier with the IPS 8.8 DSP module fitted, three-quarter view of the black ribbed heat sink with silver accent strips and chrome corner feet.
Arc Audio ARC 1000.6 six-channel Class D car amplifier with the IPS 8.8 DSP module fitted, three-quarter view of the black ribbed heat sink with silver accent strips and chrome corner feet.

Arc Audio

Arc Audio ARC 1000.6 Six-Channel Amplifier with IPS 8.8 DSP | 175W x 6 | Class D

SKU: ARC 1000.6 W/IPS8.8DSP

$ 1,199.99 $ 1,829.99 Save $ 630.00
QUICK SPECS
  • Power (at 14.4V): 175W x 6 at 4 or 2 ohm | 350W x 3 bridged at 4 ohm | 1,050W total | Frequency response 10 Hz-30 kHz | Class D
  • Processing (IPS 8.8 installed): 8-channel DSP | dual signal mixers | crossovers, bandpass, bass boost and signal delay all DNA GUI controlled | 248 bands of EQ | up to 4 user presets | iDatalink Maestro AR capable
  • Inputs: 6 analog input channels | balanced RCA or speaker level | sensitivity 0.5V-32V | 10k ohm | 2 DSP-controlled RCA outputs | auto turn-on by signal and DC (BTL) on Ch 1/2
  • Physical: 15 3/8 x 6 3/8 x 2 1/4 in | 3 x 30A on-board fuses | 8.0-17.1V, DSP start-stop compliant to 4.5V | variable-speed ball-bearing fan | USB-micro tuning | TAMB adjustable switching frequency
Arc Audio ARC 1000.6 six-channel Class D car amplifier with the IPS 8.8 DSP module fitted, three-quarter view of the black ribbed heat sink with silver accent strips and chrome corner feet.

Arc Audio ARC 1000.6 Six-Channel Amplifier with IPS 8.8 DSP | 175W x 6 | Class D

Regular price $ 1,199.99
Sale price $ 1,199.99 Regular price $ 1,829.99
Unit price
Includes Shipping On orders to the lower 48
Full Warranty Factory Backed
Expert Support Real Installers
INSTALLER'S TAKE

The thing to understand about this amplifier is that the DSP is not an accessory bolted onto the side, it is the input board. Arc ships the ARC 1000.6 with an analog card in it and sells the IPS 8.8 as a separate purchase. This unit already has the IPS 8.8 fitted, and that changes what the amplifier is rather than just adding a feature to it.

In analog form the ARC Series has almost nothing on it. One pair of inputs, no meaningful crossover section, and that is deliberate. Arc built it for people running a processor or a high end source unit that already does the filtering. Put the IPS 8.8 in and you get six analog inputs instead of two, a sensitivity range that goes to 32 volts so you can feed it straight off a factory amplifier without a line output converter, and every filter under software control.

248 bands of equalization is more than anyone needs, but the signal delay and the crossovers are the real reason to want this. It is the right amplifier for a three way active front stage where you want one chassis doing everything. Six channels at 175 watts covers tweeters, mids and midbass with headroom left, and if you need a subwoofer channel you bridge a pair for 350 watts.

Budget time for the tune. There are no controls on the chassis at all. Everything happens over USB from a Windows laptop running ARC Audio DNA, and you want that done and saved to a preset before the amplifier disappears under a seat. Mount it where you can still reach the USB port, because you will want to go back in.

On fitment, 15 and 3/8 inches long is a big amplifier, longer than most four channels. The cooling draws air in through vents at both ends and exhausts at the front edge, so do not box either end in tight against a wall. Give it room and the fan stays quiet, because the micro-controller only spins it up when it needs to.

One last thing almost nobody remembers exists: TAMB lets you move the master clock and switching frequency in software. If you ever chase a whine or a beat against another amplifier and cannot find it in the grounds, that adjustment is sitting right there in the software suite.

Product Details
Specifications
Related Products
FAQs
Product Details

Arc Audio ARC Series Amplifiers

Arc Audio ARC 1000.6 Six-Channel Amplifier with IPS 8.8 DSP

Six channels at 175 watts each into 4 or 2 ohms, every pair bridgeable to 350 watts, and the eight-channel IPS 8.8 DSP module already fitted in place of the analog input board. This is the configuration that turns a six-channel power amplifier into a complete processed front end: crossovers, equalization, signal delay and input mixing all live inside the amplifier.

175W x 6 350W x 3 Bridged IPS 8.8 DSP Installed 248-Band EQ

Power Output

All Six Channels

175W x 6

At 4 ohms or 2 ohms

Bridged Pairs

350W x 3

At 4 ohms, three bridged channels

Total Output

1,050W

Six channels combined

The ARC 1000.6 holds 175 watts per channel at both 4 ohms and 2 ohms, so a 2-ohm midbass pair does not cost you output the way it would on a fixed-rail design. Each pair of channels bridges into a single 4-ohm load at 350 watts, which means the same chassis can run six speakers, or four speakers plus a bridged subwoofer channel, or three bridged channels, without adding a second amplifier.

The DSP Is Already Fitted

Arc Audio ships the ARC Series with an analog input board and sells the IPS 8.8 DSP module separately. This unit has the IPS 8.8 installed. The module is not an outboard processor sitting next to the amplifier and it is not a daughterboard hanging off the input stage. It physically replaces the analog input board inside the chassis, so you get a single box, a single power run, a single ground, and no processor-to-amplifier interconnect to pick up noise.

Fitting the module also changes what the amplifier accepts. The analog board takes a single pair of balanced inputs. With the IPS 8.8 in place the amplifier takes six analog input channels with a sensitivity range of 0.5 to 32 volts, which is wide enough to take a high-power factory amplifier output directly, and routes them through a signal mixer before they reach the output stage.

What the IPS 8.8 Gives You

The IPS 8.8 is an eight-channel processor. It brings dual signal mixers for recombining a factory system's split bands back into a full-range signal, crossovers on every channel pair, precise signal delay for time alignment, and 248 bands of equalization. Up to four user presets can be stored, and with the optional manual trigger switches they can be changed without a laptop or a controller connected.

Every crossover, the bandpass sections, the front-end bypass and the bass boost are controlled from the ARC Audio DNA graphical interface rather than by pots on the chassis. That is the trade the ARC Series makes: nothing to knock out of adjustment once the panels go back on, and nothing to re-set by ear in a parking lot.

175W x 6at 2 or 4 Ohm
248Bands of EQ
Up to 4User Presets
15 3/8 inLength

No Analog Crossovers, and That Is the Point

Arc Audio designed the ARC Series for premium source units that already have crossovers, and for DSP-controlled systems. In its analog form the ARC 1000.6 is deliberately a straight power amplifier. With the IPS 8.8 fitted, all of that filtering moves into the processor where it belongs, which is why this configuration suits a full active build better than a conventional amplifier with knobs on the end.

Plan the tune before the install. With the IPS 8.8 fitted there are no crossover controls on the chassis. Every filter, delay and equalization setting is made over USB from a Windows PC running ARC Audio DNA. Set the system up and save a preset before the amplifier goes somewhere you cannot reach the USB port.

Forced Induction Cooling

The ARC Series uses a high-pressure die-cast aluminum heat sink with a rough-grain black anodized finish and CNC-machined accents. Cool air is drawn in through vents at both ends of the heat sink, passes over the power supply switching devices and the output devices, and exhausts through an opening on the front edge. A variable-speed ball-bearing fan does the work and an onboard micro-controller manages its speed, so the amplifier stays quiet until it actually needs airflow. Integrated mounting feet sit in the corners of the heat sink, and plastic hex-head trim caps finish the fasteners once it is mounted.

TAMB: Adjustable Switching Frequency

Every ARC Series amplifier carries Arc Audio's TAMB technology, which is patent pending. If the master clock and output switching frequency of the amplifier ever interferes with radio reception or a keyless entry system, or beats against another amplifier in the vehicle, the installer can move the master clock frequency of the power supply and output circuits in software. That is a real fix for a problem that normally ends with relocating wiring or living with the noise.

Supporting the same goal, low-impedance filter chokes on the power connections keep power supply switching artifacts from being radiated by the power wires, and ultra-low ESR capacitors sit on both sides of the power supply for clean delivery under heavy passages.

OEM Integration

The balanced differential input stage rejects common electrical noise and accepts unbalanced RCA, balanced processor outputs, and speaker-level signals. Speaker-level input adapter plugs attenuate a factory amplifier's output to a usable level. Auto turn-on works by DC offset detection or signal detection on channels 1 and 2, so a dedicated remote wire is optional. For factory systems that need a replacement amplifier interface, the IPS 8.8 is compatible with iDatalink Maestro AR modules, which require the vehicle-specific replacement module, a T-harness and the ARC to iData signal harness adapter.

Installation summary: 15 3/8 x 6 3/8 x 2 1/4 in, Class D, 3 x 30A fusing on board, 8.0 to 17.1 volt operating range with the DSP start-stop compliant down to 4.5 volts, six balanced analog inputs at 0.5 to 32 volts, two DSP-controlled RCA outputs, USB-micro for tuning, variable-speed ball-bearing fan, remote turn-on pass through, compatible with the optional PSC and LR-2 external level controls either singly or together.

Built and Backed

Audio Intensity is an authorized Arc Audio dealer. Every unit we sell is brand new current production with full manufacturer warranty coverage and lifetime tech support.

Authorized Arc Audio Dealer

Audio Intensity ships the Arc Audio ARC 1000.6 fast from Tullahoma, Tennessee. Tell us your speakers, your impedances and whether you are running a factory head unit or an aftermarket source, and we will confirm the channel assignment and the DSP input mapping before you order.

Need two channels instead of six? The Arc Audio ARC 1000.2 shares the same ARC Series chassis and cooling with 500 watts per channel. Running a dedicated subwoofer amplifier? The Arc Audio X2 1100.1 delivers 1100 watts at 1 ohm. Contact Audio Intensity to spec the right combination.

Specifications
Arc Audio ARC 1000.6 with IPS 8.8 DSP Specifications
Power Output (at 14.4V)
Stereo at 4 Ohms175 Watts RMS x 6
Stereo at 2 Ohms175 Watts RMS x 6
Bridged at 4 Ohms350 Watts RMS x 3
Total Rated Output1,050 Watts RMS
Bridgeable Speaker OutputsYes
Output Load SwitchYes
Output TypeClass-D
Processing (IPS 8.8 DSP Installed)
DSP EquippedYes, ARC Audio IPS 8.8, 8-channel
Equalization248 bands
Crossovers, All Channel PairsDNA GUI controlled
Bandpass CrossoversDNA GUI controlled
Crossover Front-End BypassDNA GUI controlled
Bass BoostDNA GUI controlled
Signal DelayYes, DNA GUI controlled
Signal MixersDual
User Defined PresetsUp to 4
Preset Control Without PCOptional manual trigger switches, not included
Tuning SoftwareARC Audio DNA, Windows PC
Inputs and Audio
Frequency Response10 Hz to 30 kHz
Input Channels (Analog)6
Input Channel SelectionDNA control, mixer
Input TypeBalanced, RCA or speaker level
Input Sensitivity0.5V to 32V
Input Impedance10k Ohms
Input Gain TypeDedicated selection by channel pairs in the Input Mixer utility
Audio Output (RCA)2, DSP controlled
Auto-Sense Turn-OnYes, signal and DC (BTL), uses Ch 1/2 analog inputs only
Control and Integration
iDatalink Maestro AR CapableYes, requires vehicle replacement module, T-harness and ARC to iData signal harness adapter
Compatible External Level ControlPSC or LR-2, sold separately
Dual External ControlYes, PSC and LR-2 simultaneously
DSP Integrated On/Off TimingTurn-on output up to 40 ms, auto-sense hold up to 200 ms
External Amp Remote Turn-On OutputAdjustable 0.05 to 40 seconds
Remote Turn-On Pass ThroughYes, DSP controlled
USB Connection TypeUSB-Micro
Power, Cooling and Physical
Fuse Rating3 x 30 Amp, on board
Amplifier Operating Voltage8.0V to 17.1V
DSP Operating Voltage8V to 17.1V, start-stop compliant to 4.5V
Adjustable Class-D Switching FrequencyYes, TAMB technology, patent pending
CoolingForced induction, variable-speed ball-bearing fan, micro-controller managed
Onboard DiagnosticsThermal, under and over voltage, short and DC protection
Clip Warning LightsYes
Dimensions15 3/8 in (L) x 6 3/8 in (W) x 2 1/4 in (H)
Heat SinkHigh-pressure die-cast aluminum, rough-grain black anodized with CNC-machined accents
WarrantyManufacturer warranty through authorized Arc Audio dealers
Related Products
FAQs

Related Articles

Subwoofer Placement in Classic Cars title over a subwoofer box fitted in a classic car's boot

Subwoofer Placement in Classic Cars: The Ultimate Guide

A classic car has no factory sub location and often thin, undeadened metal, so placement and moun...

Read Article →
Subwoofer Power Handling RMS and Matching title over a subwoofer wired to an amplifier and multimeter

Car Subwoofer Power Handling: RMS, Matching, and What Blo...

RMS is continuous power; peak or max is a marketing number you should ignore. Underpowering does ...

Read Article →
Dual 12-inch ported subwoofer box in a car boot with an amplifier and power cable alongside

Ultimate Guide to Dual Subwoofer Setups for Car Audio

By adding two subwoofers to your car audio system, you can really boost the sound quality and bas...

Read Article →
Stylized car interior with a glowing subwoofer in the door panel and colored light trails

Car Subwoofer Placement: Optimal Positions for Maximum Bass

Putting a subwoofer in the right spot in your car is really important for the best sound and bass...

Read Article →