What does the Micro Series designation mean for enclosure sizing?

The Micro Series refers to a reduced external footprint compared to standard Proline X enclosures built for the same driver size. The internal volume is tuned to a sealed alignment, but the outer cabinet dimensions are smaller to fit installs where depth or width clearance is limited. This makes them a practical choice when a standard sealed box will not physically clear the available space. Polyfill is included to offset the acoustic effect of the reduced internal volume and extend low-frequency output.

Are these sealed or ported, and what difference does that make?

These are sealed Prodigy subwoofer enclosures — there is no port or vent in the cabinet. A sealed alignment produces tighter transient response and a more gradual low-frequency rolloff compared to a ported design, which makes them more forgiving to tune on a head unit or DSP. The tradeoff is that sealed boxes typically require more amplifier power to reach the same SPL as a ported enclosure of equivalent volume. The included polyfill increases the effective acoustic volume, which partially compensates for the compact external dimensions of the Micro Series.

What driver sizes fit these enclosures and can I use single or dual woofers?

The Proline X Micro Series sealed enclosures support 8-inch, 10-inch, and 12-inch subwoofers in both single and dual configurations. The double mounting face accommodates all three driver sizes, and the recessed woofer cutout keeps the driver flush with the baffle regardless of size. Before selecting an enclosure, confirm that the driver's recommended sealed volume matches the internal volume of the box — mismatching driver parameters to enclosure volume will affect frequency response and output. Dual configurations require two drivers of the same size and impedance for predictable load performance.

Do mounting screws come with the enclosure?

Standard mounting screws are not supplied with the Proline X Micro Series enclosures. The baffle uses standard screw mounting, so you will need to source screws that match your driver's mounting hole pattern and basket depth. Using screws that are too long risks contacting the voice coil assembly and causing damage. A general guideline is to use screws long enough to grip the MDF firmly — typically 1 inch to 1.25 inch for most driver baskets — but always verify against the driver manufacturer's specifications.

What is Dado and V-Groove construction and why does it matter?

Dado and V-Groove construction refers to a joinery method where interlocking channels are cut into panel edges before bonding. This creates a mechanical lock at each panel intersection that resists shear forces, unlike a simple butt joint that relies entirely on adhesive strength. In a subwoofer enclosure, this matters because driver excursion and sustained power create repeated pressure cycles inside the cabinet — a rigid, well-jointed structure maintains its tuned internal volume more consistently over time. The Proline X Micro Series uses this construction method to deliver dimensional accuracy and structural integrity in a compact cabinet.

Subwoofer enclosure banner image with sub enclosures from proline x

Proline X Micro Series Subwoofer Boxes | Prodigy

The Proline X Micro Series sealed subwoofer boxes are built for vehicle installs where external dimensions are restricted but driver performance cannot be reduced. The Micro Series uses a compact footprint without compromising the internal volume accuracy required for a properly tuned sealed alignment.

Cabinet construction uses Dado and V-Groove joinery, which locks panel intersections mechanically before bonding for a rigid, consistent wall structure. The double mounting face supports 8-inch, 10-inch, and 12-inch drivers in single and dual configurations. The woofer sits in a recessed cutout flush with the baffle. Mounting is done with standard screws, which are not supplied. The in-house Advanced Terminal Cup is constructed from ABS and carbon fiber with stainless steel hardware and is prewired from the factory.

Each enclosure ships with rubber feet and polyfill pre-loaded inside the cabinet. This series is suited to installers and enthusiasts who need a space-efficient sealed Prodigy subwoofer enclosure that arrives ready to install.

Tuning Frequency Sealed / Tight

Material High-Density MDF

Power Rating Small Footprint

Ideal For Space Saving

←

→

All products loaded

}

Built Different. Built Better.

Every Proline X enclosure is manufactured in our Tullahoma, Tennessee facility using materials and construction methods that most enclosure brands don't touch.

Langboard Elite MDF

48.5 lb/ft³ density and 200 psi internal bond strength, the highest-grade MDF available for enclosure construction.

1-Year Warranty

Full coverage on materials and construction defects. We stand behind every enclosure we build.

Driver-Matched Tuning

Internal volume, port tuning, and cabinet dimensions are spec'd to each driver diameter, not a universal fit applied across sizes.

Made in Tullahoma, TN

CNC-manufactured in our Tennessee facility on ShopSabre routers. Not imported. Not outsourced.

Proline X Micro Series sealed subwoofer boxes with compact Dado construction

What the Proline X Micro Series is

The Proline X Micro Series is a line of sealed subwoofer enclosures built around a reduced external footprint. They are intended for vehicle installs where standard-depth boxes do not fit — narrow trunk floors, under-seat cavities, or custom builds with strict dimensional limits. Available in 8-inch, 10-inch, and 12-inch driver sizes in single and dual configurations, the Micro Series provides output across a range of install scenarios within a smaller cabinet envelope.

Sealed enclosure performance

These are sealed enclosures with no port or passive radiator. A sealed alignment produces tight transient response and a gradual low-frequency rolloff that integrates predictably with most amplifier subwoofer channels. Polyfill is pre-loaded into each cabinet, which increases the effective acoustic volume and allows the compact enclosure to perform closer to a larger sealed box. This is particularly relevant in the Micro Series where physical volume is constrained by the reduced external dimensions.

Dado and V-Groove construction

Cabinet panels are joined using Dado and V-Groove cuts, which create interlocking channels at panel intersections before bonding. This mechanical lock adds shear resistance that a simple butt joint does not provide, and it keeps panels aligned during assembly and curing. The result is a cabinet with consistent internal dimensions and walls that resist flex under sustained driver excursion. Dado and V-Groove joinery is a construction method used where dimensional accuracy and joint strength are both required.

Driver sizing and woofer fitment

The double mounting face accepts 8-inch, 10-inch, and 12-inch subwoofers in both single and dual configurations. The recessed woofer cutout positions the driver flush with the baffle surface, which keeps the surround protected and reduces the overall depth profile of the install. Driver mounting uses standard screws, which are not supplied — confirm screw length against your driver's basket depth before install. Using the correct screw length prevents damage to the voice coil assembly.

Terminal cup and prewiring

Each enclosure uses the Proline X Advanced Terminal Cup, built in-house from ABS and carbon fiber with stainless steel hardware. Internal wiring from the terminal cup is completed at the factory, so no wiring work is required inside the cabinet during install. The stainless steel terminal hardware resists corrosion in the temperature and humidity cycles typical of vehicle environments. The carbon fiber and ABS construction keeps the cup rigid without adding significant weight.

Inclusions and install readiness

Each Proline X Micro Series enclosure ships with rubber feet to isolate the cabinet from the cargo floor and reduce transmitted vibration. Polyfill is pre-loaded and prewiring is complete at the terminal cup. The only installation steps required are mounting the driver with standard screws, connecting the terminal cup to the amplifier, and securing the box. This level of preparation reflects how Audio Intensity builds out the Proline X line — ready to install without additional prep at the bench.