Wāvtech thinPRO12 – Shallow-Mount 12" Subwoofer for Deep Bass

The thinPRO12 works well in both sealed and ported enclosures. A sealed enclosure between 0.4 to 1.0 cubic feet provides tight, controlled bass. For higher output, a ported enclosure between 0.8 to 1.5 cubic feet is ideal. The recommended port tuning frequency is 34Hz for deep bass response. Proper enclosure design ensures optimal sound quality and performance.

The thinPRO12 handles 750W RMS and 2250W peak power. This allows it to operate at high volumes without distortion. The large 5-inch, 4-layer voice coil ensures proper heat dissipation for consistent performance. A vented polyimide composite former helps prevent thermal overload. Using a high-quality amplifier matched to its power rating ensures the best results.

Yes, with a 3-inch mounting depth, it fits behind seats, under truck seats, and in custom enclosures. The cast-aluminum basket ensures secure mounting while remaining lightweight. It is ideal for vehicles where space is limited but high-performance bass is desired. Proper enclosure selection is key for maximizing performance in compact areas.

A mono subwoofer amplifier that delivers 750W RMS at the subwoofer’s impedance is ideal. If using the 2-ohm version, an amp stable at 2 ohms with 750W RMS is needed. For the 4-ohm version, a 4-ohm stable amplifier with 750W RMS is recommended. A high-quality Class D amplifier will ensure efficiency and low heat generation. Using an underpowered or overpowered amplifier can affect performance and durability.

No, the thinPRO12 is not designed for free-air applications. It requires a sealed or ported enclosure to function correctly. Free-air mounting will limit cone control, reducing power handling and causing distortion. A proper enclosure ensures controlled bass response and durability. Always follow the manufacturer’s enclosure recommendations for best results.

The cone is made from honeycomb Nomex® and glass fiber, which is lightweight and rigid. The surround and dual spiders are constructed from nitrile butadiene rubber (NBR) for stability and longevity. The voice coil is a 5-inch, 4-layer design on a vented polyimide composite former, preventing thermal overload. The cast-aluminum basket provides a stable foundation without adding excessive weight. These materials ensure high excursion, durability, and clean bass reproduction.

The thinPRO12 outperforms many shallow subs with over 2 inches of peak-to-peak excursion. Its 5-inch voice coil allows for greater heat dissipation, reducing distortion at high volumes. The honeycomb Nomex® cone is stronger and more efficient than standard paper or plastic cones. Its 750W RMS power handling ensures deep, accurate bass without compression. The combination of materials and design makes it a top choice in the shallow-mount category.