Zapco M-AT1 AutoTune Microphone

Polypropylene  or Mylar dielectric capacitors

Oversized non-inductive resistors

-

Crossover Freq.: 900/3600 Hz

Slope: 12 dB/Oct LP Butterworth

6 dB/Oct BP

12 dB/Oct HP Butterworth

High-Frequency Level: 0/-3 dB

Mid Frequency Level: 0/-2 dB

Low-Frequency section: 5.165

Mid Frequency section: 5.050

High-Frequency section: 5.028

Power Handling: 300 Watt

Polypropylene  or Mylar dielectric capacitors

Oversized non-inductive resistors

-

Crossover Freq.: 900/3600 Hz

Slope: 12 dB/Oct LP Butterworth

6 dB/Oct BP

12 dB/Oct HP Butterworth

High-Frequency Level: 0/-3 dB

Mid Frequency Level: 0/-2 dB

Low-Frequency section: 5.165

Mid Frequency section: 5.050

High-Frequency section: 5.028

Power Handling: 300 Watt

6.5-inch Grille Set w/ Round Perforations - Pair - fits L65, U65, U65.2, and M65.2.

6x9-inch Grille Set w/ Round Perforations - Pair fits U69, U69.2, M69.2

The Legatia G2 grille is a 2-inch Grille Set w/ Hexagonal Perforations - Pair - fits L2 and U2.

The Legatia G3  is a 3-inch Grille Set w/ Hexagonal Perforations - Pair - fits L2 and U2

The Legatia L3x topology is loosely based off of the Legatia L2x crossover topology, which was first released in October 2009. The L3x can be used for virtually any Legatia three-way passively crossed-over systems, or used in conjunction with other Hybrid Audio products to create a truly “bespoke” three-way system. The Legatia L3x was launched in June 2011 and is the reference three-way passive crossover in Hybrid Audio’s product category known collectively as the Legatia Series.

The Legatia L3x is an exceptional-quality three-way passive crossover device that can be used with any Hybrid Audio speaker system to accommodate any number of different bespoke system designs.

At home in virtually any arrangement, the L3x is Hybrid Audio Stage V high-end three-way passive crossover, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

The Legatia L2x is an exceptional-quality two-way passive crossover device that can be used with any Hybrid Audio speaker system to accommodate any number of different bespoke system designs. The L2x can be used for two-way passively crossed-over systems, or used as the two-way dividing network for midrange and treble drivers in a “quasi-active” three-way (six speaker) system, where the midbass is actively crossed-over at the amplifier. The L2x is based loosely off of the Clarus C2x crossover, with key enhancements, including the option for vertical bi-wiring, as well as an enhanced filter set using low-tolerance, super high-quality parts.

At home in virtually any arrangement, the L2x is Hybrid Audio Stage V high-end two-way passive crossover, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.