{"product_id":"performance-optimized-wedge-sealed-10-enclosure-jl-audio-10tw3-d4","title":"Performance Optimized Wedge Sealed 10\" Enclosure | JL Audio 10TW3-D4","description":"\u003cstyle\u003e\n  .po-wrap { font-family: 'Helvetica Neue', Arial, sans-serif; line-height: 1.8; color: #1e293b; max-width: 1200px; margin: 0 auto; background: #ffffff; }\n  .po-hero { background: linear-gradient(135deg, #0f172a 0%, #0e7490 100%); padding: 60px 40px; text-align: center; color: white; }\n  .po-hero .po-title { font-size: 2.6em; font-weight: 800; text-transform: uppercase; letter-spacing: 2px; margin: 0 0 10px 0; color: white; }\n  .po-hero .po-subtitle { font-size: 1.2em; font-weight: 300; opacity: 0.9; margin: 0 0 30px 0; }\n  .po-badges { display: flex; justify-content: center; flex-wrap: wrap; gap: 12px; margin-top: 20px; }\n  .po-badge { background: rgba(6, 182, 212, 0.2); border: 1px solid #06b6d4; color: #67e8f9; padding: 8px 20px; border-radius: 20px; font-size: 0.9em; font-weight: 600; letter-spacing: 0.5px; }\n  .po-section { padding: 50px 40px; border-bottom: 1px solid #e2e8f0; background: #ffffff; }\n  .po-section:nth-child(even) { background: #f0f9ff; }\n  .po-section h2 { color: #0e7490; font-size: 2em; font-weight: 700; margin: 0 0 20px 0; padding-bottom: 12px; border-bottom: 3px solid #06b6d4; }\n  .po-section h3 { color: #0f172a; font-size: 1.4em; font-weight: 600; margin: 30px 0 15px 0; }\n  .po-section p { font-size: 1.05em; color: #334155; margin-bottom: 18px; }\n  .po-grid { display: grid; grid-template-columns: repeat(2, 1fr); gap: 24px; margin: 30px 0; }\n  .po-card { background: #ffffff; border: 1px solid #e2e8f0; border-top: 4px solid #06b6d4; padding: 25px; border-radius: 4px; }\n  .po-card h4 { color: #0e7490; font-size: 1.15em; font-weight: 700; margin: 0 0 12px 0; text-transform: uppercase; letter-spacing: 1px; }\n  .po-card p { font-size: 0.98em; color: #475569; margin: 0; }\n  .po-highlight { background: #f0f9ff; border-left: 4px solid #06b6d4; padding: 25px 30px; margin: 30px 0; border-radius: 4px; }\n  .po-highlight p { color: #1e293b; margin: 0; font-size: 1.05em; }\n  .po-cta { background: linear-gradient(135deg, #0f172a 0%, #0e7490 100%); padding: 60px 40px; text-align: center; color: white; }\n  .po-cta h2 { font-size: 2.2em; font-weight: 700; margin: 0 0 20px 0; color: white; border: none; padding: 0; }\n  .po-cta p { font-size: 1.15em; opacity: 0.92; max-width: 800px; margin: 0 auto 20px auto; color: white; }\n  @media (max-width: 768px) {\n    .po-hero { padding: 40px 20px; }\n    .po-hero .po-title { font-size: 1.8em; }\n    .po-section { padding: 30px 20px; }\n    .po-section h2 { font-size: 1.6em; }\n    .po-grid { grid-template-columns: 1fr; }\n    .po-cta { padding: 40px 20px; }\n    .po-cta h2 { font-size: 1.6em; }\n  }\n\u003c\/style\u003e\n\n\u003cdiv class=\"po-wrap\"\u003e\n\n  \u003cdiv class=\"po-hero\"\u003e\n    \u003cp class=\"po-title\"\u003ePerformance Optimized Wedge | JL Audio 10TW3\u003c\/p\u003e\n    \u003cp class=\"po-subtitle\"\u003eSingle 10\" Shallow-Mount Sealed Wedge | Rear-Firing Trunk-Load for JL's Thin-Line 10TW3-D4\u003c\/p\u003e\n    \u003cdiv class=\"po-badges\"\u003e\n      \u003cspan class=\"po-badge\"\u003e0.52 ft³ Gross\u003c\/span\u003e\n      \u003cspan class=\"po-badge\"\u003e0.50 ft³ Net (JL Spec)\u003c\/span\u003e\n      \u003cspan class=\"po-badge\"\u003eUltra-Shallow Wedge\u003c\/span\u003e\n      \u003cspan class=\"po-badge\"\u003e23\" × 13\" × 4.5\/9.25\"\u003c\/span\u003e\n      \u003cspan class=\"po-badge\"\u003eV-Groove \/ Dado\u003c\/span\u003e\n      \u003cspan class=\"po-badge\"\u003eBuilt in Tennessee\u003c\/span\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003eThe JL Audio 10TW3-D4 in JL's Spec-Perfect Sealed Volume\u003c\/h2\u003e\n    \u003cp\u003eThe JL Audio 10TW3-D4 is JL's shallow-mount 10\" thin-line subwoofer — 10 inches of cone area with just 3.25\" of mounting depth, and 15.2mm of one-way linear excursion (more than the standard W3v3 despite the shallow packaging). JL's patented concentric tube cone architecture places the motor structure forward inside the injection-molded cone body, letting this driver deliver full-size 10\" bass in enclosures that a conventional 10\" driver couldn't fit. 400 watts RMS continuous with a mica-injected polypropylene cone, rubber surround, cast alloy basket, and JL's tab-ear mounting design.\u003c\/p\u003e\n    \u003cp\u003eThe Performance Optimized Wedge Sealed 10 for JL Audio TW3 is engineered to hit JL's exact published sealed specification. 0.52 cubic feet gross internal volume minus the 10TW3-D4's driver displacement lands at 0.50 cubic feet net — exact match to JL's published 0.50 cubic foot sealed spec, delivering the Qtc 0.96 warm\/impactful alignment JL's engineers targeted for the TW3 series.\u003c\/p\u003e\n    \u003cdiv class=\"po-highlight\"\u003e\n      \u003cp\u003e0.52 cubic feet gross = 0.50 cubic feet net after the 10TW3-D4's driver displacement. Exact match to JL Audio's published optimum sealed volume for the 10TW3-D4 (Qtc 0.96, F3 just above 40 Hz). The ultra-shallow wedge geometry — 4.5\" deep at the top rising to 9.25\" at the bottom — is engineered around the TW3's 3.25\" mounting depth, mounting the driver on the vertical trunk-lid-side face and firing rearward into the trunk cavity.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003eWhy the TW3 Exists (and Why This Wedge Fits Where Others Can't)\u003c\/h2\u003e\n    \u003cp\u003eThe JL 10TW3-D4 was engineered for one specific mission: full-size 10\" bass in vehicles and configurations where a standard 10\" enclosure won't fit. Extended-cab and crew-cab pickup trucks (where the driver commonly mounts under a rear seat that lifts up). Sports cars with shallow parcel-shelf areas. Sedans with low decklid clearance. SUVs where cargo floor height is critical. The 10TW3-D4 has been the reference under-seat subwoofer for years because of two specific numbers: 3.25\" mounting depth and 15.2mm one-way Xmax. Most shallow 10s give you one or the other. JL delivers both.\u003c\/p\u003e\n    \u003cp\u003eThe Performance Optimized Wedge Sealed 10 for JL Audio TW3 solves the same space problem in trunk-load wedge form. The vertical trunk-lid-side face is only 4.5\" deep at the top, tapering to 9.25\" at the bottom — meaning the top of the cabinet slides under low parcel shelves and rear seat backs that a full-depth wedge could never clear. Combined with the TW3's own shallow mounting depth, this is one of the most vehicle-friendly full-size 10\" trunk-load enclosures available.\u003c\/p\u003e\n    \u003cdiv class=\"po-grid\"\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eSeat-Side Face Matches Seat Lean\u003c\/h4\u003e\n        \u003cp\u003eMost factory rear seat backs lean roughly 20 degrees back from vertical. The angled face of this wedge (4.5\" at top, 9.25\" at bottom) matches that lean, tucking against the seat back with no wasted gap. The ultra-shallow top face slides under decklids and parcel shelves that block deeper cabinets.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eTrunk-Lid-Side Face Fires the Woofer\u003c\/h4\u003e\n        \u003cp\u003eThe vertical face on the opposite side of the wedge (23\" wide × 13\" tall) is where the 10TW3-D4 mounts. The driver fires rearward toward the trunk lid, using the trunk cavity as an acoustic loading chamber — the classic SQ trunk-load install pattern, now available in shallow-mount format.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eTrunk Cavity Loading\u003c\/h4\u003e\n        \u003cp\u003eFiring the woofer into the trunk cavity rather than directly into the cabin uses the trunk itself as an extension of the acoustic system. Low frequencies transmit into the passenger cabin through the rear deck, seat back, and cabin boundaries — smoother than direct-firing setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eCompact, Shallow Footprint\u003c\/h4\u003e\n        \u003cp\u003e23\" wide by 13\" tall by 4.5-9.25\" deep. Smaller cabinet than the 12\" TW3 wedge for tighter trunk installs, low-clearance SUV cargo floors, and coupe trunks where a 12\" simply won't fit. Same shallow top-face design principle — the 4.5\" top depth threads under obstructions that block conventional wedges.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003eEngineered to JL Audio's Published Sealed Specification\u003c\/h2\u003e\n    \u003cp\u003eJL Audio publishes 0.50 cubic feet net internal as the recommended sealed enclosure for the 10TW3-D4. This is JL's own engineered target — the volume where the TW3's motor, suspension, and cone assembly deliver the sealed response their engineers designed the driver for. The Performance Optimized Wedge Sealed 10 delivers 0.52 cubic feet gross internal, which after subtracting the 10TW3-D4's driver displacement lands right at the 0.50 cubic foot JL spec.\u003c\/p\u003e\n    \u003ch3\u003eWhat the JL Spec Delivers\u003c\/h3\u003e\n    \u003cp\u003eThe 10TW3-D4 in its JL-spec 0.50 cu ft sealed alignment delivers a Qtc of approximately 0.96 with F3 just above 40 Hz — a slightly warm alignment with good upper-bass presence, ideal for daily-driven vehicles where cabin gain smooths out the low end. This is a musical, punchy character rather than a strictly flat one, which suits the typical use case for a shallow-mount driver in a truck, sports car, or compact vehicle. If you have room for a slightly larger enclosure (0.75 cu ft), the alignment flattens out to Qtc 0.86 — but that's not this cabinet. This cabinet delivers exactly what JL specifies as optimum.\u003c\/p\u003e\n    \u003ch3\u003eMounting Geometry and Driver Fitment\u003c\/h3\u003e\n    \u003cp\u003eThe vertical trunk-lid-side baffle is cut to the 10TW3-D4's exact 9.625\" cutout specification. The 10TW3-D4's 3.25\" mounting depth fits inside the cabinet with clearance — internal depth from the vertical baffle to the interior of the angled seat-side face ranges from approximately 3.75\" at the top edge to 8.5\" at the bottom (after 3\/4\" MDF panel thickness), with the driver's mounting position at cabinet center providing well over 5\" of clearance behind the motor. JL's no-pole-vent motor design permits mounting close to the rear wall of an enclosure — the driver requires only 0.25\" of rear clearance to breathe.\u003c\/p\u003e\n    \u003ch3\u003eTab-Ear Mounting\u003c\/h3\u003e\n    \u003cp\u003eThe TW3 uses JL's tab-ear mounting design — plastic mounting ears extending outward from the driver frame, rather than a continuous perimeter flange. This maximizes cone area within the mounting footprint but requires specific mounting hardware: use #8 or #10 pan-head screws (NOT tapered\/countersunk), since countersunk screws can wedge the plastic ears outward under vibration and crack them over time. The Proline X wedge baffle is pre-drilled and threaded-insert equipped for the TW3's tab pattern with pan-head hardware included.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003ePerformance Series Construction, Driver-Specific Tuning\u003c\/h2\u003e\n    \u003cdiv class=\"po-grid\"\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eLangboard Elite MDF\u003c\/h4\u003e\n        \u003cp\u003ePremium 3\/4\" MDF panels milled to documented spec — denser and more dimensionally stable than commodity MDF. Especially important in a shallow cabinet where panel-to-air ratio is high — panel resonance would color the sound more than in a deeper box, and Langboard's density minimizes that risk.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eV-Groove and Dado Joinery\u003c\/h4\u003e\n        \u003cp\u003eCNC-cut V-grooves at every panel intersection let the wedge cabinet fold into its angled shape with maximum glue surface. Dado joints lock the vertical woofer baffle and the ultra-shallow angled seat-side panel into the side walls — no fasteners visible from outside, no exposed end grain at joints.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003eTW3-Specific Baffle Machining\u003c\/h4\u003e\n        \u003cp\u003eThe 9.625\" cutout is CNC-machined with the tab-ear mounting positions pre-drilled and 8\/32 threaded inserts pressed into the baffle backside. #8 pan-head stainless steel screws included — not countersunk, per JL's mounting requirements for the tab-ear design.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"po-card\"\u003e\n        \u003ch4\u003ePre-Wired Terminal Cup\u003c\/h4\u003e\n        \u003cp\u003eProline X ABS\/carbon fiber composite terminal cup, pre-wired with 12-gauge OFC inside the cabinet, with stainless steel hardware accepting both spade and banana terminations on the input side.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cp\u003eEvery panel is cut on ShopSabre CNC routers in our Tullahoma, TN facility. The shallow wedge geometry requires precise CNC compound cuts — the 4.5\" top-face-to-9.25\" bottom-face depth transition over 13\" of height must be dimensionally perfect to hit both the JL-spec volume target and the correct 20-degree seat-side mating angle. Internal volume is verified on every unit to ensure the JL-spec 0.50 cubic foot net target is achieved.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003eCustomize Your Build\u003c\/h2\u003e\n    \u003ch3\u003eCarpet Finish\u003c\/h3\u003e\n    \u003cp\u003e\u003cstrong\u003eDark Gray Trunkliner\u003c\/strong\u003e is the standard durable wrap, matched to most factory trunk and cargo-area carpet tones. \u003cstrong\u003ePlush Black\u003c\/strong\u003e (+$10) is a deeper, more luxurious nap that pairs well with blacked-out interiors and show builds.\u003c\/p\u003e\n    \u003ch3\u003eAcrylic Insert Color\u003c\/h3\u003e\n    \u003cp\u003eChoose \u003cstrong\u003eBlack, Blue, Red, or White\u003c\/strong\u003e for the baffle insert to match your build. Or skip the insert entirely (-$40) for a clean, understated look. The insert is purely cosmetic — performance is identical across colors.\u003c\/p\u003e\n    \u003ch3\u003eBox-Only or Loaded\u003c\/h3\u003e\n    \u003cp\u003eAdd a JL Audio 10TW3-D4 (Dual 4-ohm) or 10TW3-D8 (Dual 8-ohm) driver directly to your order and we'll ship the complete loaded system, ready to wire to your amplifier. Most single-driver installs use the D4 wired parallel for a 2-ohm load. Already own your 10TW3? Order the enclosure box-only and drop in the driver you have.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003eWiring the JL Audio 10TW3-D4 to Your Amplifier\u003c\/h2\u003e\n    \u003cp\u003eThe JL Audio 10TW3-D4 is a dual-voice-coil driver with both coils at 4 ohms. This gives you two standard wiring options via the pre-wired terminal cup.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eParallel wiring (2 ohm total load):\u003c\/strong\u003e Both voice coils in parallel presents a 2-ohm load to your amplifier — the higher-output configuration, ideal for modern class D monoblocks stable at 2 ohms. Recommended for maximizing SPL and power transfer from typical 300-400 watt monoblock amps. This is the standard wiring for single-driver installs.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eSeries wiring (8 ohm total load):\u003c\/strong\u003e Both voice coils in series presents an 8-ohm load — used mainly with bridged high-voltage amp configurations, class AB amplifiers, or multi-driver installs where impedance summing matters.\u003c\/p\u003e\n    \u003cp\u003e\u003cstrong\u003eAlternative driver: 10TW3-D8.\u003c\/strong\u003e If you're building a multi-driver system, JL Audio also offers the 10TW3-D8 (Dual 8-ohm) variant, which pairs better in dual-driver configurations at 2 ohms total (each driver wired parallel to 4 ohms, then two drivers wired parallel to 2 ohms). Either D4 or D8 variant fits this cabinet identically.\u003c\/p\u003e\n    \u003cp\u003eThe 10TW3-D4 is rated for 400 watts RMS continuous with a 100-400 watt RMS recommended amplifier range. Aim for a well-regulated monoblock delivering 300-400 watts RMS at your chosen impedance for the best combination of headroom, output, and long-term reliability. Set your amplifier's active low-pass filter between 80 and 100 Hz for musical accuracy.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-section\"\u003e\n    \u003ch2\u003eBuilt in Tennessee, Backed by Audio Intensity\u003c\/h2\u003e\n    \u003cp\u003eEvery Performance Optimized enclosure is CNC-cut, assembled, and finished in our Tullahoma, TN facility. Components are pulled from inventory after your order is placed, then bonded and wrapped — a 2 to 5 business day assembly window before the box ships. No pre-built inventory sitting in warehouses, warping in storage. Each unit is built to order.\u003c\/p\u003e\n    \u003cp\u003eBacked by a 1-year limited warranty against structural failure and hardware defects. Questions on fitment, wiring, or amplifier pairing? \u003ca href=\"\/pages\/contact-us\"\u003eContact us\u003c\/a\u003e — we install this gear ourselves, in our own vehicles.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"po-cta\"\u003e\n    \u003ch2\u003eJL's Spec Volume for the Shallow 10, in a Wedge That Actually Fits\u003c\/h2\u003e\n    \u003cp\u003e0.50 cubic feet net internal — JL Audio's published optimum sealed volume for the 10TW3-D4 — in an ultra-shallow wedge geometry (4.5\" at the top) engineered around the TW3's 3.25\" mounting depth. Full-size 10\" cone area with 15.2mm Xmax, real JL Audio bass, in vehicles where a standard 10\" enclosure simply won't fit.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Proline X","offers":[{"title":"Default Title","offer_id":44528245964889,"sku":"PO 10-S W TW3","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1389\/files\/PO10-SWTW3Front.png?v=1786844823","url":"https:\/\/audiointensity.com\/products\/performance-optimized-wedge-sealed-10-enclosure-jl-audio-10tw3-d4","provider":"Audio Intensity","version":"1.0","type":"link"}