{"product_id":"arc-audio-moto-cx69-6x9-motorcycle-speaker-set","title":"Arc Audio Moto CX69 6x9 Motorcycle Speaker Set","description":"\u003ch2\u003eWhat You Are Buying\u003c\/h2\u003e\n\u003cp\u003eA pair of Arc Audio Moto CX69 speakers: 6x9 two-way, built for the open air on a motorcycle, a trike or a side-by-side. New stock, sold as a closeout.\u003c\/p\u003e\n\u003cp\u003eThis is a model we do not normally carry. When these two sets are gone, the listing goes with them.\u003c\/p\u003e\n\n\u003ch2\u003eRead This Before You Buy\u003c\/h2\u003e\n\u003cp\u003eFinal sale. No returns, no exchanges and no warranty coverage on this purchase. The speakers are new, not used or refurbished.\u003c\/p\u003e\n\n\u003ch2\u003eIt Is Not Really a Coaxial\u003c\/h2\u003e\n\u003cp\u003eArc describes the CX69 as technically a component set, because the tweeter is mounted on a bridge that spans the cone rather than on a pole piece poking through the middle of it. You still install it like a coaxial, in one 6x9 opening with one pair of wires.\u003c\/p\u003e\n\u003cp\u003eThe reason that matters is cone area. On the Moto692 this replaced, the tweeter sat in the center of the woofer and needed a second weather-resistant surround sealing around the pole piece. Moving the tweeter onto a bridge deletes that second surround and hands the space back to the cone. More cone area is more efficiency and more low-frequency output from the same hole, and Arc says losing that second surround improves sound quality by itself.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Sun, Rain and Vibration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone:\u003c\/strong\u003e injection-molded polypropylene doped with carbon, which raises thermal stability and improves damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurround:\u003c\/strong\u003e hi-clearance, low-shore rubber. Entirely UV-resistant materials throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust cap:\u003c\/strong\u003e form-molded, dual-step, sealed one-piece, covering the tri-layered bonded joint where cone, spider and former meet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpider:\u003c\/strong\u003e hybrid Nomex with a constant-wave progressive roll, so the assembly resists bottoming out at high power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding:\u003c\/strong\u003e the spider, coil former and cone are stagger-step bonded with adhesive rated above 230 degrees C, which is over 440 degrees F.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThe Motor and Basket\u003c\/h2\u003e\n\u003cp\u003eThe basket is a high-density pressure-cast four-spoke design with eight large high-velocity cooling vents under the spider mounting plateau, so heat from the voice coil has somewhere to go.\u003c\/p\u003e\n\u003cp\u003eThe motor uses a Y35A-grade ferrite magnet with a CNC-cut hot-rolled steel top plate. Ferrite rather than neodymium is a deliberate choice here: the magnet's mass works as a thermal heat sink that pulls heat away from the voice coil. On a speaker mounted in a fairing in direct sun, shedding heat is worth more than saving weight.\u003c\/p\u003e\n\u003cp\u003eThe voice coil is 1.45 inches, wound in pure OFC copper on a layered Kapton and glass fiber former. A large coil diameter means more surface area to dump heat through, which is what lets Arc rate the speaker at 125 watts musical and 300 watts peak and describe it as handling that rating easily.\u003c\/p\u003e\n\n\u003ch2\u003eThe Tweeter\u003c\/h2\u003e\n\u003cp\u003eA 25 mm polyetherimide and mylar dome, damped with Norseal PVC mesh, in a sealed and suspended assembly on a neodymium slug motor. That composite dome construction is borrowed from pro audio compression drivers, where a diaphragm has to be stiff, well damped, and indifferent to heat and weather at the same time. On a bike, all three apply.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e6x9 two-way, tweeter on a bridge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower, musical (RMS)\u003c\/th\u003e\n\u003ctd\u003e125 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower, peak\u003c\/th\u003e\n\u003ctd\u003e300 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoice coil\u003c\/th\u003e\n\u003ctd\u003e1.45 inch, OFC on Kapton and glass fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMagnet\u003c\/th\u003e\n\u003ctd\u003eY35A ferrite, CNC-cut hot-rolled steel top plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCone\u003c\/th\u003e\n\u003ctd\u003eCarbon-doped injection-molded polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBasket\u003c\/th\u003e\n\u003ctd\u003ePressure-cast four-spoke, eight cooling vents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTweeter\u003c\/th\u003e\n\u003ctd\u003e25 mm PEI and mylar dome, Norseal damped, neodymium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew, closeout, final sale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOn the Numbers Arc Does Not Publish\u003c\/h2\u003e\n\u003cp\u003eArc Audio's product page for the CX69 has a Specifications tab, and it is empty. There is no impedance, sensitivity, frequency response, mounting depth or cutout figure published by the manufacturer for this model.\u003c\/p\u003e\n\u003cp\u003eThe figures that circulate on dealer listings are roughly 4 ohms, 95 dB sensitivity, 50 Hz to 20 kHz, 3.25 inches of mounting depth, a 5.82 by 8.62 inch cutout and a 4.3 inch motor diameter. Those are consistent with each other and with the design, but they are not Arc's published numbers and we are not going to present them as though they were.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf clearance is tight, ask us first.\u003c\/strong\u003e We have stock in hand and can measure a set before it ships.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Suits\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuy these if\u003c\/strong\u003e you are replacing 6x9 speakers in a fairing, a lid or a saddlebag; you have an amplifier in the 75 to 125 watt per channel range; you want real weather engineering rather than a car speaker with a rubber surround; and you accept a final sale.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLook elsewhere if\u003c\/strong\u003e you need published sensitivity or response curves to model a system; your mounting depth is tight and you cannot wait for us to measure; or you need the option to return.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTest-fit before you cut. The bridge-mounted tweeter sits above the cone, so check clearance in front of the speaker as well as behind it, especially under a lid or grille.\u003c\/li\u003e\n\u003cli\u003eSeal the mounting surface. Weather-resistant materials protect the speaker, not the cavity behind it.\u003c\/li\u003e\n\u003cli\u003eRun them off an amplifier. These are efficient, but an open bike at speed has no cabin to help you, and headroom is what keeps the sound clean at road speed.\u003c\/li\u003e\n\u003cli\u003eSet gains by ear at a speed you actually ride at. Wind noise masks distortion, which is how motorcycle speakers usually die.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCondition and Sale Terms\u003c\/h2\u003e\n\u003cp\u003eNew closeout stock of a model we do not normally carry. Sold as a final sale with no returns, no exchanges and no warranty coverage. Packaging may show shelf wear. Construction details above are taken from Arc Audio's own product description; the dimensional figures are dealer-published and flagged as such. Once these are gone this listing will be removed.\u003c\/p\u003e\n\u003cp\u003eQuestions on fitment, depth or amplifier matching before you buy: \u003ca href=\"\/pages\/contact-us\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Arc Audio","offers":[{"title":"Default Title","offer_id":47877284823129,"sku":"Moto CX69","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/1389\/files\/arc-audio-moto-cx69-6x9-motorcycle-speaker-set-1.jpg?v=1794802410","url":"https:\/\/audiointensity.com\/products\/arc-audio-moto-cx69-6x9-motorcycle-speaker-set","provider":"Audio Intensity","version":"1.0","type":"link"}