Zapco

Zapco

Zapco...The Driving Force. Since 1974. 

 

Committed to Excellence

ZAPCO is dedicated to the pursuit of audio fidelity. Our first objectives are to design and manufacture audio products of unsurpassed quality, to provide unparalleled support and service for these products.

 

Experience: Knowledge from doing

There is absolutely no substitute for experience; that is a simple fact of life. Another simple fact is that ZAPCO has been the leader in defining quality standards for the car audio industry. These years have led to a thorough understanding of the challenges that are unique to the world of audio. ZAPCO's relentless quest for sonic purity consistently yields imaginative designs that utilize the most innovative technologies. Others in the industry are judged.

 

Zapco ST-4B 4 Ch. Full Range Class AB Amplifier

While the sound quality is always the number one factor in a Zapco design, there are other factors in the Studio design that make them "every-day" amps. The extruded aluminum chassis is more compact and lighter to make the studio series an easier fit in today's smaller cars. The feature set of the Studio amps provides you with all the system versatility you need without adding additional components, with everything from crossovers to preamp outputs, so multiple amps don't require extra signal cables. Power, price, size, and performance.

No, it's not designed specifically for competition. This is an amp designed to knock your socks off... in your car, for your daily use, every day. So go ahead... pop in your favorite disk, grab the volume control, and see if you don't agree that dedication to sonic purity is definitely a

good thing.

 

Features and Functions

 

  • 4-Channel, Class-AB Full Range Amplifier

  • Stable into 4 ohms bridged or 2 ohms stereo load

  • MOSFET power supply

  • RCA and OEM speaker level input

  • Variable Inputs Gain Control

  • Variable FULL / LP / HP Electronic Crossover

  • Variable Bass Boost

 

 

Specifications

 

  • Power @ 4Ω: 4 x 65 watts

  • Power @ 2Ω: 4 x 90 watts

  • Power @ 4Ω Bridged: 2 x 180 watts

  • THD @ Rated Power  < 0.2%

  • Signal to Noise Ratio > 97dB

  • Channel separation > 45dB

  • Frequency Response 20Hz to 20,000Hz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 182(W) x 52(H) x 280(L) Overall: 182(W) x 52(H) x 310(L)

$ 139.99
Zapco ST-2B 2 Ch. Full Range Class AB Amplifier

About ST-B Series amplifiers   

While the sound quality is always the number one factor in a Zapco design, there are other factors in the Studio design that make them "every-day" amps. The extruded aluminum chassis is more compact and lighter to make the studio series an easier fit in today's smaller cars. The feature set of the Studio amps provides you with all the system versatility you need without adding additional components, with everything from crossovers to preamp outputs, so multiple amps don't require extra signal cables. Power, price, size, and performance.

No, it's not designed specifically for competition. This is an amp designed to knock your socks off... in your car, for your daily use, every day. So go ahead... pop in your favorite disk, grab the volume control, and see if you don't agree that dedication to sonic purity is definitely a good thing.

Features and Functions

 

  • 2-Channel, Class-AB Full Range Amplidier

  • Stable into 4 ohms bridged or 2 ohms stereo load

  • MOSFET power supply

  • RCA and OEM speaker level input

  • Variable Inputs Gain Control

  • Variable FULL / LP / HP Electronic Crossover

  • Variable Bass Boost

 

 

Specifications

 

  • Power @ 4Ω: 2 x 65 watts

  • Power @ 2Ω: 2 x 90 watts

  • Power @ 4Ω Bridged: 1 x 180 watts

  • THD @ Rated Power  < 0.1%

  • Signal to Noise Ratio > 97dB

  • Channel separation > 45dB

  • Frequency Response 20Hz to 20,000Hz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 182(W) x 52(H) x 200(L) Overall: 182(W) x 52(H) x 230(L)

 

$ 119.99
Zapco Hat - Black on Black
Available in two sizes with an elastic stretch band, this hat is a sure winner in comfort! It has an athletic shape with a curved visor.

• 63% polyester/34% cotton/3% spandex twill
• Structured, 6-panel, mid-profile
• Stretch band
• Silver under visor
• Head circumference: 22” - 23 ⅞”

Size guide

  S/M L/XL
Size (inches) 21 ¼-22 ¾ 22 ⅜-23 ⅞
$ 25.00
Zapco ST-500XM II Mono Class D Bass Amplifier

The Studio-X line of amplifiers from Zapco was designed specifically for today’s car audio market. The Studio-X compact chassis makes it an easy fit in any car and even in motorcycle fairings.

The square, low profile chassis also means it will be easy to trim out for a great looking installation so your system will look as awesome as it sounds. And speaking of sound...This is a Zapco amplifier and sound is what it’s all about. These are Class A/B Zapco amplifiers.

The Studio-X have the same high-quality caps, op-amps, and bi-polar outputs that made the C2K and Reference series amp the industry standard for sound quality. 

Reliability? Zapco defines reliability. It’s not at all unusual to see Zapco amps moved from car to car and from generation to generation. Zapco Amps produced in the ‘90 are still being traded and bought on the internet by sound quality fans worldwide. The Studio-x will be no different.

Features and Functions

 

  • Single channel, Class D,  Bass Amplifier

  • Compact chassis

  • Variable input gain control

  • Variable electronic crossover

  • Variable subsonic filter

  • Variable bass boost control

  • Variable center frequency for bass boost

  • Variable phase control

  • Strappable to use a pair of amps on a single voice coil

  • Dash mount remote gain control

 

 

Specifications

 

  • Power @ 1Ω: 1 x 500 watts

  • THD @ Rated Power  < 0.2%THD

  • Power @ 2Ω: 1 x 300 watts

  • Power @ 4Ω: 1 x 200 watts

  • Signal to Noise Ratio > 85dB

  • THD + Noise < 0.2%

  • Efficiency > 85%

  • Frequency Response 10Hz to 200Hz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 160(W) x 52(H) x 179(L) Overall: 160(W) x 52(H) x 205(L)

$ 249.99
Zapco ST-850XM Mono Class D Bass Amplifier

The Studio-X line of amplifiers from Zapco was designed specifically for today’s car audio market. The Studio-X compact chassis makes it an easy fit in any car and even in motorcycle fairings.

The square, low profile chassis also means it will be easy to trim out for a great looking installation so your system will look as awesome as it sounds. And speaking of sound...This is a Zapco amplifier and sound is what it’s all about. These are Class A/B Zapco amplifiers.

The Studio-X have the same high-quality caps, op-amps, and bi-polar outputs that made the C2K and Reference series amps the industry standard for sound quality. 

Reliability? Zapco defines reliability. It’s not at all unusual to see Zapco amps moved from car to car and from generation to generation. Zapco Amps produced in the ‘90 are still being traded and bought on the internet by sound quality fans worldwide. The Studio-x will be no different

 

Features and Functions

 

  • Single channel, Class D,  Bass Amplifier

  • Compact chassis

  • Variable input gain control

  • Variable electronic crossover

  • Variable subsonic filter

  • Variable bass boost control

  • Variable center frequency for bass boost

  • Variable phase control

  • Strappable to use a pair of amps on a single voice coil

  • Dash mount remote gain control

 

 

Specifications

 

  • Power @ 1Ω: 1 x 850 watts

  • THD @ Rated Power  < 0.2%

  • Power @ 2Ω: 1 x 600 watts

  • Power @ 4Ω: 1 x 400 watts

  • Signal to Noise Ratio > 85dB

  • THD + Noise < 0.2%

  • Efficiency > 85%

  • Frequency Response 10Hz to 200Hz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 160(W) x 52(H) x 301(L) Overall: 160(W) x 52(H) x 326(L)

$ 299.99
Zapco ST-1000XM II Mono Class D Bass Amplifier

The Studio-X line of amplifiers from Zapco was designed specifically for today’s car audio market. The Studio-X compact chassis makes it an easy fit in any car and even in motorcycle fairings.

The square, low profile chassis also means it will be easy to trim out for a great looking installation so your system will look as awesome as it sounds. And speaking of sound...This is a Zapco amplifier and sound is what it’s all about. These are Class A/B Zapco amplifiers.

The Studio-X have the same high-quality caps, op-amps, and bi-polar outputs that made the C2K and Reference series amps the industry standard for sound quality. 

Reliability? Zapco defines reliability. It’s not at all unusual to see Zapco amps moved from car to car and from generation to generation. Zapco Amps produced in the ‘90 are still being traded and bought on the internet by sound quality fans worldwide. The Studio-x will be no different

 

Features and Functions

 

  • Single channel, Class D,  Bass Amplifier

  • Compact chassis

  • Variable input gain control

  • Variable electronic crossover

  • Variable subsonic filter

  • Variable bass boost control

  • Variable center frequency for bass boost

  • variable phase control

  • Strappable to use a pair of amps on a single voice coil

  • Dash mount remote gain control

 

 

Specifications

 

  • Power @ 1Ω: 1 x 1000 watts

  • THD @ Rated Power  < 0.2%THD

  • Power @ 2Ω: 1 x 750 watts

  • Power @ 4Ω: 1 x 500 watts

  • Signal to Noise Ratio > 85dB

  • THD + Noise < 0.2%

  • Efficiency > 85%

  • Frequency Response 10Hz to 200Hz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 160(W) x 52(H) x 288(L) Overall: 160(W) x 52(H) x 314(L)

 

$ 349.99
Zapco ST-2000XM II Mono Class D Bass Amplifier

The Studio-X line of amplifiers from Zapco was designed specifically for today’s car audio market. The Studio-X compact chassis makes it an easy fit in any car and even in motorcycle fairings.

The square, low profile chassis also means it will be easy to trim out for a great looking installation so your system will look as awesome as it sounds. And speaking of sound...This is a Zapco amplifier and sound is what it’s all about. These are Class A/B Zapco amplifiers.

The Studio-X have the same high-quality caps, op-amps, and bi-polar outputs that made the C2K and Reference series amps the industry standard for sound quality. 

Reliability? Zapco defines reliability. It’s not at all unusual to see Zapco amps moved from car to car and from generation to generation. Zapco Amps produced in the ‘90 are still being traded and bought on the internet by sound quality fans worldwide. The Studio-x will be no different.

 

Features and Functions:

 

  • Single channel, Class D,  Bass Amplifier

  • Compact chassis

  • Variable input gain control

  • Variable electronic crossover

  • Variable subsonic filter

  • Variable bass boost control

  • Variable center frequency for bass boost

  • variable phase control

  • Strappable to use a pair of amps on a single voice coil

  • Dash mount remote gain control

 

 

Specifications:

 

  • Power @ 1Ω: 1 x 2000 watts

  • THD @ Rated Power  < 0.2%

  • Power @ 2Ω: 1 x 1500 watts

  • Power @ 4Ω: 1 x 1000 watts

  • Signal to Noise Ratio > 85dB

  • THD + Noise < 0.2%

  • Efficiency > 85%

  • Frequency Response 10Hz to 200Hz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 160(W) x 52(H) x 420(L) Overall: 160(W) x 52(H) x 446(L)

$ 569.99
Zapco ST-2X SQ 2 Ch. Sound Quality Class AB Amplifier

The Studio-X line of amplifiers from Zapco was designed specifically for today’s car audio market. The Studio-X compact chassis makes it an easy fit in any car and even in motorcycle fairings.

The square, low profile chassis also means it will be easy to trim out for a great looking installation so your system will look as awesome as it sounds. And speaking of sound...This is a Zapco amplifier and sound is what it’s all about. These are Class A/B Zapco amplifiers.

The Studio-X have the same high-quality caps, op-amps, and bi-polar outputs that made the C2K and Reference series amps the industry standard for sound quality. 

Reliability? Zapco defines reliability. It’s not at all unusual to see Zapco amps moved from car to car and from generation to generation. Zapco Amps produced in the ‘90 are still being traded and bought on the internet by sound quality fans worldwide. The Studio-x will be no different.

 

 

Features and Functions

 

  • 2-Channel, Full Range, Class A/B

  • Tiffany style Panel Mount RCA 

  • Speaker Level Inputs

  • Variable input gain control

  • Variable electronic crossover

  • Auto-on with Speaker level inputs

  • Variable bass boost control

  • Compact chassis

 

 

Specifications

 

  • Power @ 4Ω: 2 x 65 watts

  • THD @ Rated Power < 0.5%

  • Power @ 2Ω: 2 x 95 watts

  • Power Bridged @ 4Ω: 190W RMS

  • Signal to Noise Ratio > 95dB

  • THD + Noise < 0.05%

  • Channel Separation  > 60dB

  • Frequency Response 15Hz to 30KHz ±1dB

  • Input Sensitivity .25v to 5v

  • Dimensions in mm: 160(W) x 52(H) x 154(L) Overall: 160(W) x 52(H) x 180(L)

$ 159.99

Scroll To Top

Sale

Unavailable

Sold Out