ESB

ESB 2.6k2 Sale
ESB 2.6k2

This system includes more advanced technology development for car audio speakers to serve the music in the automotive environment. This system can be virtually used on every car, it is able to produce a great sound even with moderate power amplifiers. A reference product for the entry-level category.

 2.028 Tweeter 

The tweeter uses a neodymium magnet optimized with computer simulations to get better efficiency and improve linearity.

Neodymium magnet is a high-grade type to eliminate magnetic loss at high temperatures. Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight, and excellent self-damping, to give a resonance-free frequency response until well audible frequency. The semi-catenary profile on our diaphragm provides maximum stiffness at the tip of the dome. The result is clean, smooth, and transparent sound reproduction with high efficiency from 900 Hz to 25 kHz at high power handling capacity. The special ventilation design, SVS (Surround Vented System) provides two benefits: optimal cooling of moving coil to be able to handle high power without dynamic compression and avoiding compressing the air at the back of the dome, with a great reduction in distortion and extending response to a lower frequency. Residual resonance is killed by the under dome damping material named dB Cloth®, this extends the frequency response to the lower limits and reduces harmonic distortion.

The protection grill can be supplied in different colors (white, black, and green) to adapt to the vehicle dashboard. The front faceplate can be easily removed with clips and replaced with an adaptor for mounting from the inside of the door panels. The tweeter can slide inside the adaptor in five different positions for a wide range of applications and/or assembly. A practical “cup” allows mounting above the dashboard or above the pillar using different types of orientation. The tweeter is supplied with a passive crossover with a practical cable connection and fast-on. (The crossover must be placed in a dry place)

****Please note the green trim ring on the front of the tweeter has been changed to a dark gray***** It can also be removed and painted.

2.165 Woofer 

Magnet motor is optimized with FEA simulation to ensure a perfectly symmetrical magnetic flux in both directions of movement of the cone. Metal parts machined from solid metal and refined with CNC machining for maximum magnetic flux linearity and minimum magnetic loss, this reduces distortion at high power levels. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction of even the most demanding musical passages. Exponential cone built with a composite of cellulose pulp and hemp fiber (CELEMPTM), ensures a perfect balance between rigidity and weight. The cellulose pulp ensures an extremely natural and fluid reproduction in all musical passages, with an excellent extension at high frequencies without audible break-up. The five-spoke anti-resonant and self-extinguishing ABS basket, ensure a drastic reduction of the cone’s back reflections. High structural and torsional rigidity is a goal for perfect parts alignment, this needs a very low tolerance construction and assembling system, which means better efficiency, more power handling, and less distortion. The exclusive rubber surround offers maximum linearity of travel and high reliability in extreme conditions. The radial ventilation system ensures high thermal dissipation capacity, for power and reliability. Large cotton spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, this increases the useful range of use.

 

 

$ 299.99 $ 249.99
ESB 3.165C  2-Way 6.5 Sale
ESB 3.165C 2-Way 6.5"/165 mm Convertible Speakers

The 3000 series includes two convertible speakers, with a 6.5”/165 mm or a 6x9”/150x230 mm woofer, and a 1”/25 mm dome tweeter. By removing the tweeter from the woofer, it allows the system to transform from a coaxial system to a separate 2-way system.

When using the woofer in "component" mode, the tweeter support is replaced by mounting an ABS phase plug on the pole piece. This detail is essential to focus the high-frequency information in the center of the cone. The ABS phase plug innovative design ensures that the speaker response remains linear at mid-high and high frequencies. Its concavities arranged on a very open angle help to increase linearity even at accentuated listening angles. This is very important for the reproduction of the medium and medium-high range when the woofer is installed in the lower part of the door.

They are supplied with accessories for flexible installation, however, grilles are not included.

Details:

Treated paper cone (woofer)

Hi Module silk dome (tweeter)

Y-35 ferrite magnet (woofer) 

N42 neodymium magnet (tw)

Fiberglass reinforced ABS basket 

Motor metal part CNC machined 

-

Nominal Impedance: 4 Ohm

Nominal Power Handling: 120 Watt

Transient Power: 240 Watt

Freq. Response: 65 Hz ~ 25 KHz

Sensitivity: 88.5 dB 1W/1m

$ 499.99 $ 399.99
ESB 3.25  1
ESB 3.25 1"/25 mm Dome Tweeter - Pair

3.25

1"/25 mm Dome Tweeter

Hi module silk dome

ABS housing with self-damping

N42 neodymium magnet 

Motor metal part CNC machined

25 mm voice coil 

Optimized computer design 

-

Nominal Impedance: 4 Ohm

Nominal Power Handling: 90 Watt

Transient Power: 180 Watt

Freq. Response: 900 Hz ~ 25 KHz

Sensitivity: 91 dB 1W/1m

$ 79.99
ESB 3.28  1.1
ESB 3.28 1.1"/28 mm Dome Tweeter - Pair

3.28

1.1"/28 mm Dome Tweeter

Torcon® soft dome

High-loss damping suspension

N42 neodymium magnet 

SVS ventilation design

28 mm voice coil 

Optimized computer design 

-

Nominal Impedance: 4 Ohm

Nominal Power Handling: 90 Watt

Transient Power: 180 Watt

Freq. Response: 900 Hz ~ 25 KHz

Sensitivity: 91 dB 1W/1m

$ 119.99
ESB 3.65  2.5
ESB 3.65 2.5"/65 mm Widerange

3.65

2.5"/65 mm Wide range

Treated paper cone

Perbunan rubber suspension

N42 neodymium magnet 

Fiberglass reinforced ABS basket

Balanced cotton spider 

Double layer voice coil 

-

Nominal Impedance: 4 Ohm

Nominal Power Handling: 60 Watt

Transient Power: 120 Watt

Freq. Response: 100 Hz ~ 22 KHz

Sensitivity: 83 dB 1W/1m

$ 249.99
ESB 3.69K2.5  2-Way Speaker System with 6x9 Sale
ESB 3.69K2.5 2-Way Speaker System with 6x9" Woofer and 2.5" Widerange

The ESB 3.69K2.5 combines the 3.65 2.5" Wideband driver with the 3.69 6x9" woofer. This is an active set and does not include a passive crossover network.

3.65

2.5"/65 mm Wideband Driver

Treated paper cone

Perbunan rubber suspension

N42 neodymium magnet 

Fiberglass reinforced ABS basket

Balanced cotton spider 

Double layer voice coil 

-

Nominal Impedance: 4 Ohm

Nominal Power Handling: 60 Watt

Transient Power: 120 Watt

Freq. Response: 100 Hz ~ 22 KHz

Sensitivity: 83 dB 1W/1m

 

3.69

6x9"/150x230 mm Woofer

Treated paper cone

Perbunan rubber suspension

Y-35 ferrite magnet 

Fiberglass reinforced ABS basket

Balanced cotton spider 

Double layer voice coil 

-

Nominal Impedance: 4 Ohm

Nominal Power Handling: 120 Watt

Transient Power: 240 Watt

Freq. Response: 55 Hz ~ 9 KHz

Sensitivity: 88.5 dB 1W/1m

 

 

 

 

 

$ 649.99 $ 499.99
ESB 3.UMA 2 way Mid-High Unit
ESB 3.UMA 2 way Mid-High Unit

Introducing the brand new 3.UMA. This special and exclusive component driver is a concept born way back in the ’70s, it aims to concentrate medium and tweeter emissions on a single virtual point. This minimizes phase delays and irregularities at the crossover point. The speaker is composed of the 1.1 "/ 28 mm tweeter and the 3.65 midranges, with different dust cover to have a midrange function (not wide range) and not interfere with the tweeter frequencies.

3.UMA

2-Way Mid-High Unit

2.5"/65 mm paper cone (Mid)

N42 neodymium magnet (Mid)

Fiberglass reinforced ABS basket

Silk-impregnated fabric dome (Tw)

N42 neodymium magnet (Tw)

28 mm Silk Dome (Tw)  

-

Nominal Impedance: 4 Ohm

Nom. Power: 60 (mid), 80 (tw) W

Trans. Power: 120 (mid), 160 (tw) W

Freq. Response: 100 Hz ~ 25 KHz

Sens.: 83 (mid), 89 (tw) dB 1W/1m


$ 299.99
ESB 5.6k2 5000 series 6.5
ESB 5.6k2 5000 series 6.5" 2 way component set

ESB 5.6k2 5000 series 6.5" 2-way component set

The philosophy of this project is to create a loudspeaker system with an extremely high transient response (dynamic),  in order to obtain a music reproduction with a more realistic impact and involvement.

To achieve this, the main goal was to reduce the moving masses in order to make the mobile part of the loudspeaker light and fast in its movements, favoring the sudden variations of movement transmitted by the piece of music through the amplifier.

A look inside - Tweeter 

 

The carbon fiber reinforced, polymer matrix, composite dome, ensures extraordinary rigidity combined with a very low weight.

The 28 mm (tweeter) and 50 mm (midrange) aluminum voice coil allows the use of very high power for this kind of component.

The tweeter uses a very large, vented neodymium motor magnet optimized with computer simulations (FEA) to obtain greater efficiency and improve linearity along with all the voice coil’s excursion.

Neodymium magnet is a high-grade type to reduce magnetic loss at elevated temperature and concentrate more energy in a small space.

All motor parts are made by the CNC process. This gives tighter tolerances and improved performance.

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, with reduced distortion, and increased durability. The axial ventilation holes reduce the compression of the air at the back of the dome with greatly reduced distortion and extended response into lower frequencies. 

A special acoustic resistance helps to control the Ots. Residual resonances are killed by the under-dome, dB Cloth® damping material, this extends the frequency response to the lower limits and reduces harmonic distortion.

Woofer:

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, reduced distortion, and increased durability. The stepped back allows a very long cone excursion. 

Metal parts machined from solid and refined material are CNC machined for maximum magnetic flux linearity and minimum magnetic loss. This reduces distortion at high power levels. A pure copper ring was inserted into the magnetic field to reduce harmonic distortion. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction to handle the most demanding musical passages.  

The carbon fiber reinforced, polymer matrix composite, exponential cone ensures an extraordinary rigidity combined with a very low weight.  

The eight twin-spoke anti-resonant and self-extinguishing carbon fiber reinforced ABS frame, ensures a drastic reduction of the cone's back reflections. The frame design assures high structural and torsional rigidity. This is the goal for perfect parts alignment and very tight construction tolerances. 

The exclusive ESB design of the TSW (Twin Symmetrical Wave) double-wave rubber suspension allows an excursion with perfect progression and linearity. This feature ensures natural low-frequency reproduction at low as well as at high volume.  

Large Conex® spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, thus increasing the useful frequency range.


$ 649.99
ESB 5.6k3 5000 series 6.5
ESB 5.6k3 5000 series 6.5" 3 way component set

5000 Series

The philosophy of this project is to create a loudspeaker system with an extremely high transient response (dynamic),  in order to obtain a music reproduction with a more realistic impact and involvement.

To achieve this, the main goal was to reduce the moving masses in order to make the mobile part of the loudspeaker light and fast in its movements, favoring the sudden variations of movement transmitted by the piece of music through the amplifier.

A look inside - Tweeter 

 

The carbon fiber reinforced, polymer matrix, composite dome, ensures extraordinary rigidity combined with a very low weight.

The 28 mm (tweeter) and 50 mm (midrange) aluminum voice coil allows the use of very high power for this kind of component.

The tweeter uses a very large, vented neodymium motor magnet optimized with computer simulations (FEA) to obtain greater efficiency and improve linearity along with all the voice coil’s excursion.

Neodymium magnet is a high-grade type to reduce magnetic loss at elevated temperature and concentrate more energy in a small space.

All motor parts are made by the CNC process. This gives tighter tolerances and improved performance.

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, with reduced distortion, and increased durability. The axial ventilation holes reduce the compression of the air at the back of the dome with greatly reduced distortion and extended response into lower frequencies. 

A special acoustic resistance helps to control the Ots. Residual resonances are killed by the under-dome, dB Cloth® damping material, this extends the frequency response to the lower limits and reduces harmonic distortion.

Woofer:

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, reduced distortion, and increased durability. The stepped back allows a very long cone excursion. 

Metal parts machined from solid and refined material are CNC machined for maximum magnetic flux linearity and minimum magnetic loss. This reduces distortion at high power levels. A pure copper ring was inserted into the magnetic field to reduce harmonic distortion. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction to handle the most demanding musical passages.  

The carbon fiber reinforced, polymer matrix composite, exponential cone ensures an extraordinary rigidity combined with a very low weight.  

The eight twin-spoke anti-resonant and self-extinguishing carbon fiber reinforced ABS frame, ensures a drastic reduction of the cone's back reflections. The frame design assures high structural and torsional rigidity. This is the goal for perfect parts alignment and very tight construction tolerances. 

The exclusive ESB design of the TSW (Twin Symmetrical Wave) double-wave rubber suspension allows an excursion with perfect progression and linearity. This feature ensures natural low-frequency reproduction at low as well as at high volume.  

Large Conex® spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, thus increasing the useful frequency range.


$ 899.99
ESB 8.6 K3  - Three way Active 6.5
ESB 8.6 K3 - Three way Active 6.5" Component Speaker Set.

Elevated to perfection

 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 

8000 Series - Woofers  Tech Specs

Main Construction Features

 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,999.99
ESB 8.6K2  - Two way Active 6.5
ESB 8.6K2 - Two way Active 6.5" Component Speaker Set

Elevated to perfection 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 8000 Series - Woofers  Tech Specs

Main Construction Features

 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,249.99
ESB 8.6K2 LE  2-Way Speaker System - Limited Edition
ESB 8.6K2 LE 2-Way Speaker System - Limited Edition

Elevated to perfection 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 8000 Series - Woofers  Tech Specs

Main Construction Features 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,999.99
ESB 8.6K2S  - Two way Active 6.5
ESB 8.6K2S - Two way Active 6.5" Component Speaker Set

Elevated to perfection 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 8000 Series - Woofers  Tech Specs

Main Construction Features 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,249.99
ESB 8.6K3U  3-Way Speaker System with UMA
ESB 8.6K3U 3-Way Speaker System with UMA

Elevated to perfection

 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 

8000 Series - Woofers  Tech Specs

Main Construction Features

 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters UMA Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight, and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

  • 8.165 - 6.5"/165 mm Woofer

  • 8003UMA - 1.1/28 mm tw + 3"/75 mm mid.

  • Nominal Impedance: 4 Ohm

  • Frequency Response: 45Hz to 25KHz

  • Nominal Power handling: Woofer 160W, UMA 120W

  • Transient Power: Woofer 320W, UMA 240W

 

 

$ 2,199.99

Scroll To Top

Sale

Unavailable

Sold Out