Hybrid Audio 4" Speakers

Below is a complete comparison of all hybrid Audio 4" speakers.
DC Audio Level 1 10 m4 10" Subwoofer

The level one is an affordable option for DC Audio enthusiasts. They work in both sealed and ported enclosures! It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke. 2.0" voice coil, Glossy Black stamped Steel Frame, push terminals and a rating suggestion of 300w RMS/600w peak power handling.

Features:

• Stitched surround and paper cone assembly

• Rubber Motor boot with DC Logo

• Polypropylene dust cover with DC logo

• Heavy duty interweaved tinsel lead wire sewn to the spider

• Stamped Steel black frame

• FEA analyzed and optimized motor assembly - Fully CNC machined

• Rubber mounting gasket

• Chrome spring loaded push terminals

• 2.0” voice coil

 

DC Audio Level 1 Subwoofers 10" and 12" Information

Save
$ 145.00 $ 120.00
DC Audio Level 1 12 m4 12" Subwoofer

The level one is an affordable option for DC Audio enthusiasts. They work in both sealed and ported enclosures! It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke. 2.0" voice coil, Glossy Black stamped Steel Frame, push terminals and a rating suggestion of 300w RMS/600w peak power handling.

Features:

• Stitched surround and paper cone assembly

• Rubber Motor boot with DC Logo

• Polypropylene dust cover with DC logo

• Heavy duty interweaved tinsel lead wire sewn to the spider

• Stamped Steel black frame

• FEA analyzed and optimized motor assembly - Fully CNC machined

• Rubber mounting gasket

• Chrome spring loaded push terminals

• 2.0” voice coil

 

DC Audio Level 1 Subwoofers 10" and 12" Information

Save
$ 155.00 $ 130.00
DC Audio XL10 m4

DC Audio XL subwoofers DO take up to 21 working days to be completed, as they are completely made to order subwoofers (and there might be a queue). They will be shipped on a first come first serve basis. DC Audio pride themselves on superior built products, one woofer at a time, ensuring the great performance that DC Audio products are known for.

The XLm4 is the next generation of DC Audio’s most award-winning driver. They come in 10”, 12”, 15” and 18” sizes. The XLm4 has more cooling, longer lasting spider packs, and about a 45% increase in the RMS rating over the XLm1! This sub was great, to begin with, but with the redesign constructive changes, they have only gotten better.


 

$ 640.00 $ 560.00
DC Audio XL12 m4

DC Audio XL subwoofers DO take up to 21 working days to be completed, as they are completely made to order subwoofers (and there might be a queue). They will be shipped on a first come first serve basis. DC Audio pride themselves on superior built products, one woofer at a time, ensuring the great performance that DC Audio products are known for.

The XLm4 is the next generation of DC Audio’s most award-winning driver. They come in 10”, 12”, 15” and 18” sizes. The XLm4 has more cooling, longer lasting spider packs, and about a 45% increase in the RMS rating over the XLm2! This sub was great to begin with, but with the redesign constructive change,s they have only gotten better.

$ 660.00 $ 576.00
DC Audio XL15 m4

DC Audio XL subwoofers DO take up to 21 working days to be completed, as they are completely made to order subwoofers (and there might be a queue). They will be shipped on a first come first serve basis. DC Audio pride themselves on superior built products, one woofer at a time, ensuring the great performance that DC Audio products are known for.

The XLm4 is the next generation of DC Audio’s most award-winning driver. They come in 10”, 12”, 15” and 18” sizes. The XLm4 has more cooling, longer lasting spider packs, and about a 45% increase in the RMS rating over the XLm2! This sub was great to begin with, but with the redesign constructive change,s they have only gotten better.

$ 700.00 $ 608.00
DC Audio XL18 m4

DC Audio XL subwoofers DO take up to 21 working days to be completed, as they are completely made to order subwoofers (and there might be a queue). They will be shipped on a first come first serve basis. DC Audio pride themselves on superior built products, one woofer at a time, ensuring the great performance that DC Audio products are known for.

The XLm4 is the next generation of DC Audio’s most award-winning driver. They come in 10”, 12”, 15” and 18” sizes. The XLm4 has more cooling, longer lasting spider packs, and about a 45% increase in the RMS rating over the XLm2! This sub was great to begin with, but with the redesign constructive changes, they have only gotten better.

$ 765.00 $ 664.00
Hybrid Audio Legatia L4

The Hybrid Audio Legatia L4 is the ideal multi-purpose super high-end speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L4 allows it to be mounted in typical “4-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension.

At home in virtually any arrangement, the Hybrid Audio Legatia L4 high-end midrange offering, boasts exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

 

Looking for grilles? Check here!

 

$ 439.99 $ 349.99
Hybrid Audio Legatia L4SE

The Hybrid Audio Legatia L4SE is a 118mm (4.65-inch) wide-bandwidth midrange/full-range driver to compliment both two-way and three-way system designs, where a point-source midrange and/or full-range driver is required.

 

The Hybrid Audio Legatia L4SE is the world’s finest multi-purpose super high-end speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L4SE allows it to be mounted in typical “4-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension. 

At home in virtually any arrangement, the L4SE is Hybrid Audio Technologies Legatia SE high-end midrange offering, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

 

$ 779.99 $ 619.99
Hybrid Audio Legatia L4SE Carbon

The Hybrid Audio Legatia L4SE Carbon topology is a derivative of the massively successful Legatia L4SE transducer which was first launched in August 2010. At the onset of the Legatia SE Carbon program, the purpose for the series was to be an exceptionally high-end option for shallow-depth midbass drivers to be used specifically in German automobiles, and in other vehicles where typical-depth high-quality midbass drivers would not fit, and where depth was at a premium. The Legatia L4SE is a 118mm (4.65-inch) midbass driver to compliment both two-way and three-way system designs, where a shallow-depth, long-throw, small-format midbass is required.

 

The Hybrid Audio Legatia L4SE Carbon is the world’s finest multi-purpose super high-end small-format midbass driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L4SE Carbon allows it to be mounted in typical “4-inch” midrange locations within a vehicle, especially in those circumstances which require extremely shallow depth, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension.

 

At home in virtually any arrangement, the L4SE Carbon is Hybrid Audio Technologies Legatia SE Carbon high-end small-format midbass offering, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

 

 

$ 779.99 $ 619.99
Hybrid Audio Legatia L4SE Flangeless

Flangeless Special Edition 4.65-Inch Cone Midrange - Pair - Custom product – no mounting flange – requires custom installation – good for use in extremely small diameter applications. This is the flangeless version of the L4SE.

 

The Hybrid Audio Legatia L4SE Flangeless is the world’s finest multi-purpose super high-end speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L4SE allows it to be mounted in typical “4-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension.

 

At home in virtually any arrangement, the Hybrid Audio Legatia L4SE Flangeless high-end midrange offering exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

$ 779.99 $ 619.99
Mirus M41-2 4” Coaxial Set (No Grilles Available)

The Stage 1 Mirus line-up is comprised of dedicated coaxial kits for the cost-effective, OEM replacement market.

"We managed to get Hybrid Audio-level performance at this price point; the Mirus name is Latin for 'astonishing'; Hybrid Audio is sure that you will be astonished at how good an entry-level coaxial can truly sound (and look)."

Kits include a pair of coated steel frame two-way coaxials with water-proof paper cones proprietary to Hybrid Audio Technologies, high-energy ferrite magnets, 20mm soft-dome tweeters that swivel, integrated high-quality Mylar tweeter crossover capacitors, encased in a full-color gift box. Grilles are not available for this specific product.

 

$ 179.99 $ 149.99

Scroll To Top

Sale

Unavailable

Sold Out