Hybrid Audio 3" Speakers

Hybrid Audio speakers are available in a very unique 3 inch size offering amazing performance in a small size and installation opportunities for better placement in the vehicle allowing for the creation of the optimum soundstage.
Hybrid Audio Unity U3

Hybrid Audio Technologies latest addition to the Unity line up is the Hybrid Audio U3 3.7" Wide Band Midrange Driver. This cost-effective solution offers the opportunity for customers to benefit from the legendary quality of Hybrid Audio midrange speakers in the sub $200 price category.

The new Hybrid Audio U3 driver is a stand-alone driver that can be added into a component set for an affordable 3-way solution or can be used in conjunction with a midbass driver allowing for a near drop-in replacement for Dodge, Chrysler and Toyota owners looking for an affordable upgrade with minimal modifications.

$ 249.99 $ 199.99
Hybrid Audio Legatia L3V2
The Hybrid Audio Legatia L3V2 is a 93mm (3.7-inch) “small format” wide-bandwidth midrange/full-range driver to compliment both two-way and three-way system designs, where a point-source midrange and/or full-range driver is required.
The Hybrid Audio Legatia L3V2 is the ideal multi-purpose super high-end speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L3V2 allows it to be mounted in typical “3-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension. At home in virtually any arrangement, the L3V2 is Hybrid Audio Technologies Legatia high-end small-format midrange offering, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.


Basket -  The basket of the L3V2 is a shared design with the Legatia L3SE for easy upgrade potential; the L3V2 and L3SE are interchangeable in mounting topology. The basket is a high-quality cast aluminum design, and contains a 93mm flange providing for the mounting of the driver via four screw holes (the use of 3mm cap head screws is ideal). The overall dimensions of the driver are very amenable for use in the car audio environment, and in locations typical of the standard “3-inch” driver, or in custom locations at the discretion of the end-user, boasting a depth of just 43mm (1.69-inch). The basket features large openings behind the cone to eliminate chuffing and other aerodynamic-based noises, as well as provides adequate communication to the back of the cone for acoustic suspension and proper operation.
Motor - The motor of the L3V2 is paramount to the performance of the driver, providing for a flat and wide BL curve (as a learning note, BL is the equivalent of torque in a car; a car with a flat and constant torque curve provides much better acceleration and performance than a car with a peaky, non-constant torque curve). The BL curve is flat and extended, yielding 6mm of two-way linear excursion, resulting in the L3V2 being able to accurately track the input signal. Reduced distortion and greater dynamics are the immediate sonic benefits. The motor of the L3V2 includes a high-energy strontium magnet with an opposing high-grade NdFeB magnet at the top of the magnetic gap to improve restorative force, compliance, motor strength, displacement, and power handling. The magnet assemblies fully surround the voice coil.
Voice Coil - The voice coil diameter of the L3V2 is a large 25.5mm (1-inch), which is the proper balance between size and moving mass in super high-end mobile audio midranges/full-range drivers. The voice coil diameter serves several key functions: elevated power handling, dissipation of heat (thereby lowering power compression), and maximizing the size of the magnet assembly for enhanced motor compliance. The voice coil is high-purity aluminum, which is superior to copper for heat dissipation, as well as significantly reduced moving mass. The result is an extremely light weight winding with good power handling and low inductance.
Suspension - The inverted surround is butyl rubber which is highly consistent, and does not suffer the variance of natural rubbers. This rubber surround terminates mechanical vibrations well, having a low stiffness for positive damping of resonances. The spider material was chosen for optimal performance; the spider is a 90/10 cotton/Nomex blend with single-dip low viscosity phenolic. This material provides the stiffness desired without being overly brittle or stiff, where vibrations in the spider are well damped and do not translate into the former or the cone.
Cone - Like other Legatia midrange designs, you will find no composite or metal cone materials used on the L3V2, as our approach to point-sourcing is to allow the Legatia midbass/midrange driver to effectively play into upper treble frequencies. The Legatia L3V2 is a cone-type driver consisting of a proprietary hybrid paper diaphragm with extremely low moving mass. Paper is widely acknowledged as the bestdamping material, as it provides the near optimum balance of strength and weight. The cone has been treated with a water resistant element at the rear to accommodate door mounting, or other areas prone to occasional contact with liquid. The cone design offers a wide dispersion pattern to make for flexible installation and speaker location. The Legatia L3V2 has an outstanding extended frequency response; the usable frequency range of this driver exceeds seven complete octaves of usable bandwidth on-axis (140 Hz – 18,000+ Hz). Even off-axis, the L3V2 faithfully recreates more than five full octaves of information, for the ultimate “small-format” midrange/full-range driver.
Looking for the grilles? Check here!
$ 399.99 $ 319.99
Hybrid Audio Legatia L3SE

The Hybrid Audio Legatia L3SE is a 93mm (3.7-inch) “small format” wide-bandwidth midrange/full-range driver to compliment both two-way and three-way system designs, where a point-source midrange and/or full-range driver is required. 

The Hybrid Audio Legatia L3SE is the world’s finest multi-purpose super high-end speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L3SE allows it to be mounted in typical “3-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension. 

At home in virtually any arrangement, the L3SE is Hybrid Audio Technologies Legatia SE high-end small-format midrange offering, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

 

$ 659.99 $ 529.99
Hybrid Audio Legatia L3SE Flangeless

Custom product – no mounting flange – requires custom installation – good for use in extremely small diameter applications. This is the flangeless version of the L3SE.

 The Hybrid Audio Legatia L3SE Flangeless is the world’s finest multi-purpose super high-end speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in an infinite baffle configuration; a simple, solid baffle, solidly attached to the car’s chassis with available airspace at the rear of the baffle is all that is required for optimum operation. The size of the L3SE Flangeless allows it to be mounted in typical “3-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, as long as there is adequate airspace behind the driver to allow it to maintain proper damping and acoustic suspension.

 At home in virtually any arrangement, the Hybrid Audio Legatia L3SE Flangeless high-end small-format midrange offering, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

$ 659.99 $ 529.99
Hybrid Audio Legatia L3 Pro Dome Midrange

The Hybrid Audio Legatia L3 Pro dome topology is a departure from the typical cone-type midrange drivers in the same size category as produced by Hybrid Audio Technologies. The L3 Pro was intended to be used in approximately the same fashion as the Legatia L3V2 and Legatia L3SE, both cone midrange devices, to give the end-user more choices for a high-end midrange solution to fit a variety of potential system designs and mounting strategy. Naturally, the efficacy of the L3 Pro, as compared to its sibling cone midrange drivers, is its sensitivity and ability to be used without a sealed baffle since the L3 Pro is a tuned rear-chamber midrange.

 The Hybrid Audio Legatia L3 Pro dome midrange is the world’s finest multi-purpose super high-end dome midrange speaker driver. Mechanical and electrical parameters are amenable to a variety of different installations and speaker locations. This driver is intended to be used in a variety of installation protocols and arrangements.

 The size of the L3 Pro allows it to be mounted in typical “3-inch” and “4-inch” midrange locations within a vehicle, or in custom locations at the discretion of the end-user, even in areas where there may not be adequate airspace behind the driver.

 At home in virtually any arrangement, the L3 Pro is Hybrid Audio Technologies’ Legatia Pro high-end small-format midrange offering, boasting exceptional performance and a design philosophy that goes hand in hand with true high-fidelity playback.

 

$ 809.99 $ 649.99

Scroll To Top