ESB Speakers

ESB Speakers
ESB, for over thirty years, has specialized in the engineering and construction of speakers for automotive applications, offering different product lines, united by the fact of true fidelity to the musical source. True to quality. True to the music. Pure performers, accurate reproducers.
ESB 2.6k2
ESB 2.6k2

This system includes more advanced technology development for car audio speakers to serve the music in the automotive environment. This system can be virtually used on every car, it is able to produce a great sound even with moderate power amplifiers. A reference product for the entry-level category.

 2.028 Tweeter 

The tweeter uses a neodymium magnet optimized with computer simulations to get better efficiency and improve linearity.

Neodymium magnet is a high-grade type to eliminate magnetic loss at high temperatures. Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight, and excellent self-damping, to give a resonance-free frequency response until well audible frequency. The semi-catenary profile on our diaphragm provides maximum stiffness at the tip of the dome. The result is clean, smooth, and transparent sound reproduction with high efficiency from 900 Hz to 25 kHz at high power handling capacity. The special ventilation design, SVS (Surround Vented System) provides two benefits: optimal cooling of moving coil to be able to handle high power without dynamic compression and avoiding compressing the air at the back of the dome, with a great reduction in distortion and extending response to a lower frequency. Residual resonance is killed by the under dome damping material named dB Cloth®, this extends the frequency response to the lower limits and reduces harmonic distortion.

The protection grill can be supplied in different colors (white, black, and green) to adapt to the vehicle dashboard. The front faceplate can be easily removed with clips and replaced with an adaptor for mounting from the inside of the door panels. The tweeter can slide inside the adaptor in five different positions for a wide range of applications and/or assembly. A practical “cup” allows mounting above the dashboard or above the pillar using different types of orientation. The tweeter is supplied with a passive crossover with a practical cable connection and fast-on. (The crossover must be placed in a dry place)

****Please note the green trim ring on the front of the tweeter has been changed to a dark gray***** It can also be removed and painted.

2.165 Woofer 

Magnet motor is optimized with FEA simulation to ensure a perfectly symmetrical magnetic flux in both directions of movement of the cone. Metal parts machined from solid metal and refined with CNC machining for maximum magnetic flux linearity and minimum magnetic loss, this reduces distortion at high power levels. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction of even the most demanding musical passages. Exponential cone built with a composite of cellulose pulp and hemp fiber (CELEMPTM), ensures a perfect balance between rigidity and weight. The cellulose pulp ensures an extremely natural and fluid reproduction in all musical passages, with an excellent extension at high frequencies without audible break-up. The five-spoke anti-resonant and self-extinguishing ABS basket, ensure a drastic reduction of the cone’s back reflections. High structural and torsional rigidity is a goal for perfect parts alignment, this needs a very low tolerance construction and assembling system, which means better efficiency, more power handling, and less distortion. The exclusive rubber surround offers maximum linearity of travel and high reliability in extreme conditions. The radial ventilation system ensures high thermal dissipation capacity, for power and reliability. Large cotton spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, this increases the useful range of use.

 

 

$ 299.99
ESB 5.6k2 5000 series 6.5" 2 way component set

ESB 5.6k2 5000 series 6.5" 2-way component set

The philosophy of this project is to create a loudspeaker system with an extremely high transient response (dynamic),  in order to obtain a music reproduction with a more realistic impact and involvement.

To achieve this, the main goal was to reduce the moving masses in order to make the mobile part of the loudspeaker light and fast in its movements, favoring the sudden variations of movement transmitted by the piece of music through the amplifier.

A look inside - Tweeter 

 

The carbon fiber reinforced, polymer matrix, composite dome, ensures extraordinary rigidity combined with a very low weight.

The 28 mm (tweeter) and 50 mm (midrange) aluminum voice coil allows the use of very high power for this kind of component.

The tweeter uses a very large, vented neodymium motor magnet optimized with computer simulations (FEA) to obtain greater efficiency and improve linearity along with all the voice coil’s excursion.

Neodymium magnet is a high-grade type to reduce magnetic loss at elevated temperature and concentrate more energy in a small space.

All motor parts are made by the CNC process. This gives tighter tolerances and improved performance.

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, with reduced distortion, and increased durability. The axial ventilation holes reduce the compression of the air at the back of the dome with greatly reduced distortion and extended response into lower frequencies. 

A special acoustic resistance helps to control the Ots. Residual resonances are killed by the under-dome, dB Cloth® damping material, this extends the frequency response to the lower limits and reduces harmonic distortion.

Woofer:

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, reduced distortion, and increased durability. The stepped back allows a very long cone excursion. 

Metal parts machined from solid and refined material are CNC machined for maximum magnetic flux linearity and minimum magnetic loss. This reduces distortion at high power levels. A pure copper ring was inserted into the magnetic field to reduce harmonic distortion. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction to handle the most demanding musical passages.  

The carbon fiber reinforced, polymer matrix composite, exponential cone ensures an extraordinary rigidity combined with a very low weight.  

The eight twin-spoke anti-resonant and self-extinguishing carbon fiber reinforced ABS frame, ensures a drastic reduction of the cone's back reflections. The frame design assures high structural and torsional rigidity. This is the goal for perfect parts alignment and very tight construction tolerances. 

The exclusive ESB design of the TSW (Twin Symmetrical Wave) double-wave rubber suspension allows an excursion with perfect progression and linearity. This feature ensures natural low-frequency reproduction at low as well as at high volume.  

Large Conex® spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, thus increasing the useful frequency range.


$ 649.99
ESB 5.6k3 5000 series 6.5
ESB 5.6k3 5000 series 6.5" 3 way component set

5000 Series

The philosophy of this project is to create a loudspeaker system with an extremely high transient response (dynamic),  in order to obtain a music reproduction with a more realistic impact and involvement.

To achieve this, the main goal was to reduce the moving masses in order to make the mobile part of the loudspeaker light and fast in its movements, favoring the sudden variations of movement transmitted by the piece of music through the amplifier.

A look inside - Tweeter 

 

The carbon fiber reinforced, polymer matrix, composite dome, ensures extraordinary rigidity combined with a very low weight.

The 28 mm (tweeter) and 50 mm (midrange) aluminum voice coil allows the use of very high power for this kind of component.

The tweeter uses a very large, vented neodymium motor magnet optimized with computer simulations (FEA) to obtain greater efficiency and improve linearity along with all the voice coil’s excursion.

Neodymium magnet is a high-grade type to reduce magnetic loss at elevated temperature and concentrate more energy in a small space.

All motor parts are made by the CNC process. This gives tighter tolerances and improved performance.

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, with reduced distortion, and increased durability. The axial ventilation holes reduce the compression of the air at the back of the dome with greatly reduced distortion and extended response into lower frequencies. 

A special acoustic resistance helps to control the Ots. Residual resonances are killed by the under-dome, dB Cloth® damping material, this extends the frequency response to the lower limits and reduces harmonic distortion.

Woofer:

Great attention was paid to the axial and radial ventilation of the moving coil, to ensure high power handling, reduced distortion, and increased durability. The stepped back allows a very long cone excursion. 

Metal parts machined from solid and refined material are CNC machined for maximum magnetic flux linearity and minimum magnetic loss. This reduces distortion at high power levels. A pure copper ring was inserted into the magnetic field to reduce harmonic distortion. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction to handle the most demanding musical passages.  

The carbon fiber reinforced, polymer matrix composite, exponential cone ensures an extraordinary rigidity combined with a very low weight.  

The eight twin-spoke anti-resonant and self-extinguishing carbon fiber reinforced ABS frame, ensures a drastic reduction of the cone's back reflections. The frame design assures high structural and torsional rigidity. This is the goal for perfect parts alignment and very tight construction tolerances. 

The exclusive ESB design of the TSW (Twin Symmetrical Wave) double-wave rubber suspension allows an excursion with perfect progression and linearity. This feature ensures natural low-frequency reproduction at low as well as at high volume.  

Large Conex® spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, thus increasing the useful frequency range.


$ 899.99
ESB 8.6K2 - Two way Active 6.5" Component Speaker Set

Elevated to perfection 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 8000 Series - Woofers  Tech Specs

Main Construction Features

 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,249.99
ESB 8.6K2S  - Two way Active 6.5
ESB 8.6K2S - Two way Active 6.5" Component Speaker Set

Elevated to perfection 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 8000 Series - Woofers  Tech Specs

Main Construction Features 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,249.99
ESB 8.6 K3 - Three way Active 6.5" Component Speaker Set.

Elevated to perfection

 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 

8000 Series - Woofers  Tech Specs

Main Construction Features

 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,999.99
ESB 8.6K2 LE  2-Way Speaker System - Limited Edition
ESB 8.6K2 LE 2-Way Speaker System - Limited Edition

Elevated to perfection 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 8000 Series - Woofers  Tech Specs

Main Construction Features 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

 

 

$ 1,999.99
ESB 8.6K3U 3-Way Speaker System with UMA

Elevated to perfection

 

The 8000 series can be considered the direct heir of the 7000 series. The goal was to renew a variety of speakers in itself exceptional, with the help of the latest technologies and the use of the best materials available today; always with an eye to the versatility of installation. The key to the development of this type of system in the car was so taken full advantage of their exceptional musicality. In the 8000 series, every detail was taken care of with the utmost care, from the choice of materials to the forms, from the construction and finishing of the baskets to the ventilation systems of magnets and coils. It has improved what was thought to be difficult to improve and we strongly believe that it has laid the foundation for another decade of success.

 

8000 Series - Woofers  Tech Specs

Main Construction Features

 

• Basket made of 7000 aluminum alloy entirely worked by the numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistent performance and maximum energy transfer from the voice coil to the cone with an increase in efficiency in the low range and absence of resonances in the medium/high range. (only with Limited Edition Speakers)

• Cone in an unpressed paper, as well as the dust cover. The best compromise between damping and rigidity for an extremely natural sound without colorations or alterations. A water repellent treatment also makes it suitable for applications in harsh environments.

• Oversized magnet. The high-quality wound magnet (Y-35) guarantees a surplus of energy that makes the excursion peaks easily reproducible from this woofer. Even at high excursions, the coil works quietly always in its magnetic field.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the moving coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening at the bottom where its conformation reduces the noise of possible turbulence to inaudible levels.

• The exclusive design clamp accepts large section cables.

• The large diameter voice coil uses aluminum support to better disperse the temperature. Furthermore, the entire voice coil is exposed to the outside air through large slits in the basket (protected by a dust sponge).

 

8000 Series - Tweeters UMA Specs

Main Construction Features

 

• The large diameter 28 mm voice coil is the right compromise between the lightness of the classic 25 mm coil and the great power management of 32 mm coils. A perfect combination of power and lightness, the necessary for a tweeter that must reproduce frequencies in a linear and faithful way even beyond the threshold of audibility. The coil uses aluminum support to better disperse the temperature.

• Body made of 7000 aluminum alloy and brass, entirely worked by numerical control (CNC). This makes the structure very rigid and with practically zero tolerance to the benefit of consistency of performance and maximum linearity of reproduction, free from any vibration and/or resonance.

• Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight, and excellent self-damping, get a free resonance frequency response until over audible frequency. 

• O52 oversized high-quality neodymium magnet. This "engine" guarantees a perfectly linear and constant magnetic flux over the entire working range of the tweeter, guaranteeing an extremely linear and neutral response both at low and high volume. Furthermore, a pure copper ring was added to reduce the harmonic distortions.

• A careful study supported by FEM analysis has allowed us to design the metal parts of the magnet in order to maximize the flow exactly around the voice coil and make it linear throughout the entire excursion. Ventilation is ensured by a large opening on the bottom, protected by a sponge with calibrated holes. This solution also reduces the peak impedance to the resonance frequency making the tweeter easier to interface with any passive crossovers.

  • 8.165 - 6.5"/165 mm Woofer

  • 8003UMA - 1.1/28 mm tw + 3"/75 mm mid.

  • Nominal Impedance: 4 Ohm

  • Frequency Response: 45Hz to 25KHz

  • Nominal Power handling: Woofer 160W, UMA 120W

  • Transient Power: Woofer 320W, UMA 240W

 

 

$ 2,199.99

Scroll To Top

Panel Tool
Float header
Default Boxed Large Boxed Medium
Header Default Header One Header Two Header Three Header Four
Sale

Unavailable

Sold Out