This system includes more advanced technology development for car audio speakers to serve the music in the automotive environment. This system can be virtually used on every car, it is able to produce a great sound even with moderate power amplifiers. A reference product for the entry-level category.
2.028 Tweeter
The tweeter uses a neodymium magnet optimized with computer simulations to get better efficiency and improve linearity.
Neodymium magnet is a high-grade type to eliminate magnetic loss at high temperatures. Torcon® soft dome, an exclusive Polyphenylene Sulfide (PPS) with a high-performance fiber that offers superb heat resistance, low weight, and excellent self-damping, to give a resonance-free frequency response until well audible frequency. The semi-catenary profile on our diaphragm provides maximum stiffness at the tip of the dome. The result is clean, smooth, and transparent sound reproduction with high efficiency from 900 Hz to 25 kHz at high power handling capacity. The special ventilation design, SVS (Surround Vented System) provides two benefits: optimal cooling of moving coil to be able to handle high power without dynamic compression and avoiding compressing the air at the back of the dome, with a great reduction in distortion and extending response to a lower frequency. Residual resonance is killed by the under dome damping material named dB Cloth®, this extends the frequency response to the lower limits and reduces harmonic distortion.
The protection grill can be supplied in different colors (white, black, and green) to adapt to the vehicle dashboard. The front faceplate can be easily removed with clips and replaced with an adaptor for mounting from the inside of the door panels. The tweeter can slide inside the adaptor in five different positions for a wide range of applications and/or assembly. A practical “cup” allows mounting above the dashboard or above the pillar using different types of orientation. The tweeter is supplied with a passive crossover with a practical cable connection and fast-on. (The crossover must be placed in a dry place)
****Please note the green trim ring on the front of the tweeter has been changed to a dark gray***** It can also be removed and painted.
2.165 Woofer
Magnet motor is optimized with FEA simulation to ensure a perfectly symmetrical magnetic flux in both directions of movement of the cone. Metal parts machined from solid metal and refined with CNC machining for maximum magnetic flux linearity and minimum magnetic loss, this reduces distortion at high power levels. 25 mm CCAW (Copper Clad Aluminum Wire) double layer voice coil wound on an aluminum former for exceptional power handling and compression-free reproduction of even the most demanding musical passages. Exponential cone built with a composite of cellulose pulp and hemp fiber (CELEMPTM), ensures a perfect balance between rigidity and weight. The cellulose pulp ensures an extremely natural and fluid reproduction in all musical passages, with an excellent extension at high frequencies without audible break-up. The five-spoke anti-resonant and self-extinguishing ABS basket, ensure a drastic reduction of the cone’s back reflections. High structural and torsional rigidity is a goal for perfect parts alignment, this needs a very low tolerance construction and assembling system, which means better efficiency, more power handling, and less distortion. The exclusive rubber surround offers maximum linearity of travel and high reliability in extreme conditions. The radial ventilation system ensures high thermal dissipation capacity, for power and reliability. Large cotton spider allows a smooth and gentle run at low excursions, and gently holds the cone at high excursions, this increases the useful range of use.
