DC Audio

DC Audio 1.2k amplifier

The DC Audio 1.2k competition series amplifier is a 1,200 watt mono block. It is capable of running up to 16 volts for up to1,450 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob. For power inputs it will accept 4 awg for power and 4 awg for ground.

$ 496.00 $ 385.00
DC Audio 10k Amplifier

The DC Audio 10k competition series amplifier is a 10,000 watt mono block. It is built for 12 volt audio systems. It will not operate on 16 or 18 volt systems. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped for 20,000 watts of power. It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.

$ 2,620.00 $ 2,400.00
DC Audio 175.4 Amplifier

The DC Audio 175.4 competition series amplifier is a 175 watts per channel @ 4 ohms or 250 watts per channel @ 2 ohms. It is not 1 ohm stable. We know a lot of our customers love their low end ground pounders but want their mids and highs to keep up. That's why we offer such a large 4 channel amp. We believe that "Overkill is Under-Rated". For power inputs it will accept 4 awg for power and 4 awg for ground.

$ 760.00 $ 600.00
DC Audio 2.0k Amplifier

The DC Audio 2.0k competition series amplifier is a 2,000 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground.

$ 780.00 $ 615.00
DC Audio 3.5k Amplifier

The DC Audio 3.5k competition series amplifier is a 3,500 watt mono block. It is capable of running up to 18 volts for up to 5,100 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and 0 awg for ground.

$ 1,260.00 $ 1,000.00
DC Audio 5.0k Amplifier

The DC Audio 5.0k competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground.

$ 1,876.00 $ 1,500.00
DC Audio 7.5k Amplifier

The DC Audio 7.5k competition series amplifier is a 7,500 watt mono block. It is capable of running up to 18 volts for up to 9,200 watts. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground.

$ 2,115.00 $ 1,900.00
DC Audio 90.4 Amplifier

The DC Audio 90.4 Competition series amplifier is a 90 watts per channel @ 4 ohms or 130 watts per channel @ 2 ohms. This amp has a fully active crossover and lots of clean power for the SQ minded builds. Its also fits installs where you may want to amplify your front stage and bridge the rear 2 channels to your sub stage and have a bass knob to control it. Versatility is what this amp is all about.

$ 655.00 $ 452.00
DC Audio 9k Amplifier

The DC Audio 9K competition series amplifier is a 9,000 watt mono block. It is capable of running up to 18 volts for up to 11,000 watts. It is a linkable amp and designed to run at 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept triple 0 awg for power and triple 0 awg for ground.

$ 2,520.00 $ 2,300.00
DC Audio Level 1 10 m4 10" Subwoofer

The level one is an affordable option for DC Audio enthusiasts. They work in both sealed and ported enclosures! It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke. 2.0" voice coil, Glossy Black stamped Steel Frame, push terminals and a rating suggestion of 300w RMS/600w peak power handling.

Features:

• Stitched surround and paper cone assembly

• Rubber Motor boot with DC Logo

• Polypropylene dust cover with DC logo

• Heavy duty interweaved tinsel lead wire sewn to the spider

• Stamped Steel black frame

• FEA analyzed and optimized motor assembly - Fully CNC machined

• Rubber mounting gasket

• Chrome spring loaded push terminals

• 2.0” voice coil

 

DC Audio Level 1 Subwoofers 10" and 12" Information

Save
$ 145.00 $ 120.00
DC Audio Level 1 12 m4 12" Subwoofer

The level one is an affordable option for DC Audio enthusiasts. They work in both sealed and ported enclosures! It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke. 2.0" voice coil, Glossy Black stamped Steel Frame, push terminals and a rating suggestion of 300w RMS/600w peak power handling.

Features:

• Stitched surround and paper cone assembly

• Rubber Motor boot with DC Logo

• Polypropylene dust cover with DC logo

• Heavy duty interweaved tinsel lead wire sewn to the spider

• Stamped Steel black frame

• FEA analyzed and optimized motor assembly - Fully CNC machined

• Rubber mounting gasket

• Chrome spring loaded push terminals

• 2.0” voice coil

 

DC Audio Level 1 Subwoofers 10" and 12" Information

Save
$ 155.00 $ 130.00
DC Audio Level 2 10 m2

With more power handling than before, the Level 2 is back and better than ever!

This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.

It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.

This sub works great in sealed or ported enclosures and definitely gives you more bang
for your buck! Made with high quality parts and hand built in the USA.

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 240.00 $ 200.00
DC Audio Level 2 12 m2

With more power handling than before, the Level 2 is back and better than ever!

This sub has everything you need in a daily driver except the cost. This is one of our greatest accomplishments.

It starts out with a double-stacked FEA optimized motor. A chrome top plate and T yoke to keep it looking good. It has 22 mm of X-Max, progressive spider, 2.5" voice coil, cast basket, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.

This sub works great in sealed or ported enclosures and definitely gives you more bang
for your buck! Made with high quality parts and hand built in the USA.

 

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 260.00 $ 210.00
DC Audio Level 3 10 m2.1

The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures.

The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm.

This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket,
push terminals, and upgraded sewn down  lead wire. We give the Level 3 a power rating of 900w RMS/1800w peak.
    
Made with high quality parts and hand built in the USA, this is probably our #1 best seller.

 

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 320.00 $ 272.00
DC Audio Level 3 12 m2.1

The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures.

The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm.

This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket,
push terminals, and upgraded sewn down  lead wire. We give the Level 3 a power rating of 900w RMS/1800w peak.
    
Made with high quality parts and hand built in the USA, this is probably our #1 best seller.

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 350.00 $ 296.00
DC Audio Level 3 15 m2.1

The level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures.

The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm.

This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket,
push terminals, and upgraded sewn down  lead wire. We give the Level 3 a power rating of 900w RMS/1800w peak.
    
Made with high quality parts and hand built in the USA, this is probably our #1 best seller.

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 370.00 $ 320.00
DC Audio Level 3 18 m2

The DC Audio Level 3 sub is the ultimate daily driver sub. It puts out the low lows with lots of output designed for sealed or ported enclosures.

The Level 3 sub is a triple stacked FEA optimized motor wrapped in a magnet boot, chrome top plate and T yoke. The deep gap offers more X-max for a total of 22.5mm.

This sub also comes with dual upgraded progressive spiders, cone, surround, 3" voice coil, cast basket,
push terminals, and upgraded sewn down  lead wire. We give the Level 3 a power rating of 900w RMS/1800w peak.
    
Made with high quality parts and hand built in the USA, this is probably our #1 best seller.

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 425.00 $ 368.00
DC Audio Level 4 10 m2.1

The Level 4 m2.1 was designed to take even more power and get even louder than the m1. With fantastic power handling and smashing lows its hard to beat.

The Level 4 sub is a large triple stacked motor, wrapped in a magnet boot with a chrome top plate and T yoke yielding 23.5mm of X-Max.

Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1400w RMS and 2800w peak.
    
Ported or sealed, this is a great choice for high-powered daily systems and competitors.As always, this sub is made with high quality parts and hand built in the USA.

 

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 470.00 $ 375.00
DC Audio Level 4 12 m2.1

The Level 4 m2 was designed to take even more power and get even louder than the m1. With fantastic power handling and smashing lows its hard to beat.

The Level 4 sub is a large triple stacked motor, wrapped in a magnet boot with a chrome top plate and T yoke yielding 23.5mm of X-Max.

Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1400w RMS and 2800w peak.
    
Ported or sealed, this is a great choice for high-powered daily systems and competitors.As always, this sub is made with high quality parts and hand built in the USA.

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 480.00 $ 400.00
DC Audio Level 4 15 m2.1

The Level 4 m2 was designed to take even more power and get even louder than the m1. With fantastic power handling and smashing lows its hard to beat.

The Level 4 sub is a large triple stacked motor, wrapped in a magnet boot with a chrome top plate and T yoke yielding 23.5mm of X-Max.

Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1400w RMS and 2800w peak.
    
Ported or sealed, this is a great choice for high-powered daily systems and competitors.As always, this sub is made with high quality parts and hand built in the USA.

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 520.00 $ 440.00
DC Audio Level 4 18 m2

The Level 4 m2 was designed to take even more power and get even louder than the m1. With fantastic power handling and smashing lows its hard to beat.

The Level 4 sub is a large triple stacked motor, wrapped in a magnet boot with a chrome top plate and T yoke yielding 23.5mm of X-Max.

Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1400w RMS and 2800w peak.
    
Ported or sealed, this is a great choice for high-powered daily systems and competitors.As always, this sub is made with high quality parts and hand built in the USA.

 

All DC Audio Subwoofers are hand built to order here in the USA and can take from 3 to 5 working days to complete depending upon current # of orders ahead of you. DC Audio prides themselves on superior built products, one woofer at a time, ensuring the dominating performance DC woofers are known for.

$ 575.00 $ 470.00
DC Audio M3-8

The  DC Audio M3 8 is an 8" subwoofer and is available in both dual 2 and dual 4 ohm version. Designed using a tall roll, stitched surround, oversized spiders and an extremely tall cast frame, the DC Audio M3 8 allows for extreme amounts of excursion to produce extreme spl previously unheard of in an 8" subwoofer design.

 The Dc Audio M3 8 uses a gap cooled design to allow the 2" copper coil to thermally take more power than other 2" coil motors with the traditional pole venting while relying on the bolted down spaced spider design to keep it all linear.

Key Features

• Extremely rigid non-pressed paper cone assembly
• High Roll Stitched Multilayered reinforced polymer foam surround
• Rigid propylene dust cover with White DC logo
• Bolted down & spaced Linear roll spiders
• Sewn flat heavy duty tinsel lead wire
• Custom Cast aluminum black frame
• FEA analyzed and optimized motor assembly – Fully CNC machined
• Rubber mounting gasket and custom tooled motor boot.
• DVC 2.0” Copper voice coil.

 

$ 230.00 $ 192.00
DC Audio Sound Damping Mat - Noise Reduction

DC Mat is a High Quality self-adhesive, foil backed Sound / Vibration damper. It is designed to be applied to the sheet metal of your car reducing road noise and heat. It’s as easy as cleaning the metal (very important step. If you dont clean the surface correctly the product may not bond), removing the protective section of the mat and applying the DC mat. Anyone can do it.



Car Audio Applications

Car Audio systems can really benefit from this product. If you have spent money on a nice sound system chances are you want to get the most out of it. Road Noise was not recorded on the music tracks so why listen to them while driving. DC Mat can help eliminate these unwanted noises so you can focus on what counts, those new tunes you spent your hard earned money on.


Car Exterior – You know we have all been at a stop light next to the guy who’s trunk is rattling so hard from the bass you keep watching to see if it’s going to fall off. Don’t be that guy with the car that rattles down the block, DC mat can help eliminate those exterior rattles as well.


SPL Competitors – Music is energy and one of the goals in the SPL world is to be able to transfer as much energy from your sound system to the mic. DC Mat can help keep panels from flexing and increase the SPL Score. Some Championships are won by 1/10 of a DB so were here to make sure you get every last one of them.
General Automotive Noise


It does not matter if you have an Old School muscle car, the latest import or something in-between. They all make noise in some way, shape or form. The DC Mat can help quiet those Cars by reducing the amount of sound passing into the interior of the car from the road, exhaust or engine compartment making your ride quieter on the inside. It will also reduce the amount of noise that radiates from the louder cars around you from entering in your car.



Heat Reduction
DC Mat will also help your car be effected LESS by the outside weather conditions. If its hot outside it will help keep the inside cooler, If its cold outside and your running your heater it will help keep more of the heat inside the car. Overall no matter what the conditions DC Mat can help you’re your overall comfort inside the vehicle.

What Were Made of -

Foil Backing- DC Mat foil is thick Offering Superior Audio Control
Imperative to offering one of the best sound controlling mats on the market.

Butyl Rubber - High quality rubber
By offering a extremely high quality butyl rubber adhesive you can use a lighter, thinner mat with greater audio control capabilities. Why would you want this? Better control, Lighter car AND no bulging panels!! Cheap Sound Deadening uses fillers to make it look like you’re getting more for your money when really it’s just adding mass to the panels to try to accomplish what a high quality mat will do without all the filler / mass.


Specifications:


· 6 mil foil
· 2.2 mm total thickness
· 18" x 32" 9 Sheets

$ 190.00 $ 155.00
DC Audio XL10 m4

DC Audio XL subwoofers DO take up to 21 working days to be completed, as they are completely made to order subwoofers (and there might be a queue). They will be shipped on a first come first serve basis. DC Audio pride themselves on superior built products, one woofer at a time, ensuring the great performance that DC Audio products are known for.

The XLm4 is the next generation of DC Audio’s most award-winning driver. They come in 10”, 12”, 15” and 18” sizes. The XLm4 has more cooling, longer lasting spider packs, and about a 45% increase in the RMS rating over the XLm1! This sub was great, to begin with, but with the redesign constructive changes, they have only gotten better.


 

$ 640.00 $ 560.00

Scroll To Top

Sale

Unavailable

Sold Out