All Except DC

FAST Rings 3-Piece Foam Speaker Enhancer Kits

The FAST Rings Kit helps to focus all the sound into the cabin, prevent panel vibration and destructive wave interference giving you noticeably improved speaker performance and less panel resonance. Each FAST Ring kit comes complete and ready to install on 1 pair of speakers

*Does not come with speakers shown in images

 

Fast Rings Instructions for Easy Installation:

  1. Separate the three pieces of Foam of the FAST Ring kit (101, 102, 103)
  2. Clean the back panel of the door, remove the backing paper from 103 and adhere directly behind the speaker to the outermost panel in the door. This will help absorb the rear wave and reduce panel vibration. (This step is optional as it is possible to absorb moisture)
  3. With a razor blade cut circumferentially 102 down to approximately 1/4”. Remove backing paper and adhere to mounting surface of speaker. This will decouple the speaker from its substrate and prevent front and rear wave cancellation.
  4. Using standard installation procedures wire and mount speaker.
  5. Clean around the outside edge of the speaker, remove the backing paper from 101 and adhere 101 directly around the speaker. Test fit panel for fitment. If needed trim 101 circumferentially until proper fitment is achieved. It should press tightly to the door panel. This will focus all the sound into the cabin, prevent panel vibration and destructive wave interference giving you noticeably improved speaker performance and less panel resonance.

     

    Fast Rings Overview Video:

     

     

    $ 29.99 $ 24.99
    MDF Mounting Rings for Installation (Recessed Available)
    During custom installations, it is sometimes necessary to use custom mounting rings. These CNC cut MDF rings are available for all Hybrid Audio Drivers cut based on the mechanical drawings of the drivers for a perfect fit each and every time. They are available in thicknesses ranging from 1/4" up to 1" and are sold in Pairs for midbass, midrange and tweeter sizing and singles for subwoofer applications. Recessed option is available but will add 1/4" to the outside diameter.
    $ 19.99 $ 9.99
    Powered By Hybrid Short Sleeve Tee - Audio Intensity Exclusive
    Cotton T-shirt in Black, Blue and Red with Power By Hybrid logo in white on the front of the tee. 
    $ 24.99
    Legatia: Tweeter Thermal Protection Device (For Active Systems)

    This is a thermal protection device for Hybrid Audio Technologies tweeters. It is required when running any tweeter actively without the protection of the factory crossover on the Imagine, Clarus speakers or Legatia speakers. It is designed to protect the speakers from damage caused by turn on pops, misadjusted crossover frequencies or auto calibrating processors that deliver a signal beyond the frequency range of the tweeter. If you use the Imagine or Clarus speakers with their included crossovers these are not necessary.


    These are required for approval to any warranty claim where a tweeter was damaged because of the above mentioned causes.


    Includes: One pair (2 pcs) of tweeter protectors

    $ 15.99
    Mirus M61-2 6.5” Coaxial Set (Grilles Optional)

    The Stage 1 Mirus line-up is comprised of dedicated coaxial kits for the cost-effective, OEM replacement market.

    "We managed to get Hybrid Audio-level performance at this price point; the Mirus name is Latin for 'astonishing'; Hybrid Audio is sure that you will be astonished at how good an entry-level coaxial can truly sound (and look)."

    Kits include a pair of coated steel frame two-way coaxials with water-proof paper cones proprietary to Hybrid Audio Technologies, high-energy ferrite magnets, 20mm soft-dome tweeters that swivel, integrated high-quality Mylar tweeter crossover capacitors, encased in a full-color gift box. Grilles are optional, sold separately, and have use in universal applications through Stage IV Clarus series.

     

    $ 209.99 $ 179.99
    Hybrid Audio Unity U69v2 6x9" Midbass drivers

    It's finally here: the Unity U69v2 (6x9-inch Drivers) from Hybrid Audio Technologies are now available here on Audio Intensity. The U69, like all Unity component sets, features a meld of both Imagine and Clarity levels to produce high-end speakers a more budget-friendly price point.

    Hybrid Audio has been testing pre-production U69s in several vehicles nationwide with incredible results. Finally, there is an audiophile upgrade to maximize the performance of the factory speaker 6x9 locations now available in the front doors of select newer vehicles. The increased cone area of a 6x9 vs a traditional 6" allows for a much more solid up front bass with increased power handling and dynamics. They work great in late-model Dodge/Chrysler, Toyotas, Cadillacs, etc. Since the are midrange/midbass drivers, they can be used beautifully as a 2-way with either the Legatia L3V2 or L3SE for those vehicles that also include dash locations. They can also be combined with a Clarus C1 Tweeter and U2x Crossover as a traditional 2-way set.

    $ 429.99 $ 339.99
    Hybrid Audio Imagine I61-2v2

    The Hybrid Audio Imagine I61-2v2 system contains speaker drivers with grilles and a tweeter passive crossover network that were developed and assembled with a significant effort in research and development, materials science engineering, an exhaustive level of sampling and prototyping, real-world testing, and obsessive attention to detail.

    The Hybrid Audio Imagine I61-2v2 system consists of a 6.5" coaxial/convertible component set designed for the discerning consumer interested in more than just an ‘OEM replacement speaker.’

    The Imagine line-up has quickly become Hybrid Audio’s best-selling speaker, and a favorite amongst dealers and consumers because of its price to performance ratio. Imagine easily outperforms sets costing twice to three times the price. In fact, Imagine was named “one of the top-11 best bargain speakers available” by Car Audio & Electronics Magazine in 2013.

    Hybrid Audio Imagine I61-2v2 kits include a pair of cast ABS frame midbass coaxials with water-proof paper cones proprietary to Hybrid Audio Technologies, high-energy ferrite magnets, 25mm soft-dome tweeters, component set conversion items (midbass phase plugs, tweeter cups and hardware, connection wire, and an extra set of magnet decals), integrated high-quality Mylar tweeter crossover capacitors.

     

    Hybrid Audio Imagine I61-2v2

    $ 399.99 $ 319.99
    Hybrid Audio Imagine I57-2 coaxial set

    The Hybrid Audio Imagine I57-2 System is a 5x7" coaxial speaker set designed for drop in replacement for most Ford vehicles. Highly efficient, utilizing superior components, the Hybrid Audio Imagine I57-2 System will outperform the competition costing twice or 3 times as much.

    The Hybrid Audio Imagine I57-2 Systems were also designed for Harley-Davidson® Saddlebag Lid Speakers for CVO®, Touring®, and Street Glide®. Hybrid Audio uses a water resistant coating perfect for motorcycles that ensures you're not only riding in style, but also protecting your investment.

    *Grilles are not available for this Coaxial Set. The Harley-Davidson® factory hardware and grilles will work with this model. This set includes the two necessary speakers.

    Frequency Response: 75-20,000 hz

    Sensitivity: 93.6 db
    Nominal Power: 100w RMS
    Max Power: 230 W
    Nominal Impedance: 4 ohms

    $ 449.99 $ 359.99
    Legatia: 7-Inch Grille Set w/ Hexagonal Perforations - Pair

    Note: The Legatia L6G grille has application for the Legatia L6V2, Legatia L6SE, as well as the original Legatia L6 offering.

     

    NOTE: The grille height clearance is very close to the height of the phase plug extended pole piece on certain Hybrid Audio models. For this reason, the end-user MUST use the supplied non-hardening gasket material between the plastic retainer and the grille mesh to keep the grille mesh firmly in place, and to allow enough height clearance to the phase plug extended pole piece.

    $ 34.99 $ 27.49
    Legatia: 3-Inch Grille Set w/ Hexagonal Perforations - Pair

    The Legatia L3G grille has application for the Legatia L3V2, Legatia L3SE, as well as the original Legatia L3 offering.

     

    NOTE: The grille height clearance is very close to the height of the phase plug extended pole piece on certain Hybrid Audio models. For this reason, the end-user MUST use the supplied non-hardening gasket material between the plastic retainer and the grille mesh to keep the grille mesh firmly in place, and to allow enough height clearance to the phase plug extended pole piece.

    $ 34.99 $ 27.49
    Hybrid Audio Unity U3

    Hybrid Audio Technologies latest addition to the Unity line up is the Hybrid Audio U3 3.7" Wide Band Midrange Driver. This cost-effective solution offers the opportunity for customers to benefit from the legendary quality of Hybrid Audio midrange speakers in the sub $200 price category.

    The new Hybrid Audio U3 driver is a stand-alone driver that can be added into a component set for an affordable 3-way solution or can be used in conjunction with a midbass driver allowing for a near drop-in replacement for Dodge, Chrysler and Toyota owners looking for an affordable upgrade with minimal modifications.

    $ 249.99 $ 199.99
    Arc Audio XDi 1200.6 Amplifier 6 Channel Full Range Class D - Previous Demo
    Used Arc Audio Xdi 1200.6 6 Channel Amplifier.
    Comes complete with all hardware but is missing the original box.
     
     
    • XDi 1200.6 - Arc Audio 6-Channel 1200W RMS Class D Full Range Amplifier
    • 4 Channels at 2 ohms: 150 Watts | 2 Channels at 4 ohms: 300 Watts | 2 Channels at 4 ohms: 150 Watts (Ch 5&6) | 2 Channel at 2 ohms: 300 Watts (Ch 5&6) | 1 Channel at 4 ohms: 600 Watts (Ch 5&6)
    • Frequency Response: 20Hz - 20kHz
    • Bass Boost: 12dB at 45Hz (Ch 5&6)
    • Dimensions: 13.0”(L) x 6.268”(W) x 2.162” (H)
    $ 849.99 $ 475.00

    Scroll To Top